Now that you are here, you must be looking for the best desoldering wick! If you aren’t for it, you shall use our search and look for the topic you are interested in. As this piece is a lengthy one and covers a few more aspects other than the best list, they are the best desoldering wick brands in United States of America and a buyer’s guide for making an informed buying decision.
Before we begin with the list, We ask you to make a list of things that you are looking for in a desoldering wick. It could be anything which you’ll require when doing tasks. This will help you have some clarity about the important things and will help you save money by not overspending on the features you won’t use or a product that has more features!
You surely are here for being able to make an informed buying decision when it comes to desoldering wick and you must be looking for the list, We know that! But before we begin, we’d like to tell you that, this is the most unbiased list ever, it has specs, lists down the features of the desoldering wick, best brands and has a dedicated buyer’s guide for people in United States of America.
Full Disclosure: This article might have a few external links to Amazon and other informative sources. When you make a purchase on Amazon using our link, we’ll earn a small fee without you having to pay extra for the item. This helps us keep the site running and publishing more awesome content, add more research and never let people buy bad-quality products!
![Soldering Iron Kit - Soldering Iron 60 W Adjustable Temperature, Solder Wire, Tweezers, Soldering Iron Stand, Soldering Iron Tips Set, Desoldering Pump, Solder Wick, Heatshrink Tubes [110 V, US Plug]](https://m.media-amazon.com/images/I/51xvQl0fbyS._SL500_.jpg)
Best desoldering wick in 2021
1. NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098″ Width, 10′ Length -Welding Equipment & Accessories
More Pictures- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
2. Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick -Tools & Home Improvement
By Lesnow
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
3. AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux – Desoldering Vacuum Pump Solder Removal Tool -Tools & Home Improvement
By AUSTOR
- 7-in-1 solder removal tool – 1pcs solder sucker and 6pcs solder wicks in 3 size
- Desoldering braid wick with rosin – 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- Wide application – correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- High quality material – the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- High efficiency solder sucker – the desoldering pump designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
4. MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length -Tools & Home Improvement
By MIKIMIQI
- Premium Material – The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
- Applicable Occasions – The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.
- Appropriate Size – The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft.
- Solder Braided Wicks – The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
- Package Include – You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random.
5. MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid, 0.075″ Width x 5′ Length, Green -Welding Equipment & Accessories
By MG Chemicals
- Conforms to MIL-F-14256E RMA flux and J-STD-004
- ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
- NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
- Environmentally and PCB safe residues
- High purity, oxide-free copper
6. Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover -Tools & Home Improvement
By Tabiger
- 3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- ABS body with non-slip sponge and Nylon nozzle desoldering pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- Desoldering Wick with copper braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- Widely used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- One-handed solder sucker with powerful suction Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
7. TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.12” L 9.8′) -Tools & Home Improvement
By TOWOT
- Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Warranty ：If you have any questions, please feel free to contact us at any time
- Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Thank you!
8. MIKIMIQI Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length for Each Solder Wick -Tools & Home Improvement
By MIKIMIQI
- Package Include – You will get 2 packs No-Clean Solder Braided Wicks.
- Applicable Occasions – The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.
- Solder Braided Wicks – The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
- Premium Material – The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
- Appropriate Size – The size of each solder wick is 2.5mm x 1.5m / 0.1inch x 5 ft.
9. 2 Packs Solder Wick No-Clean Desoldering Wick Braid + Desoldering Pump Removal Tool + Micro Wire Cutter Steel Plier Cutting for Electronics -Tools & Home Improvement
By Youland
- Powerful Suction Desoldering Pump : Good suction, reduce clogging; Only one hand can easy operated with comfortable hold feeling, it will help you do better in soldering work
- What you get from this solder kit : This package include 1 * Electronic Soldering sucking pump + 1 * Electronic wire Cutter + 2 * Desoldering wick, and We accept return, refund and replacement if you have any quesitons about the welding Items
- Just contact us freely, we guarantee you 100% satisfaction
- Ideal Choice Soldering Accessories Kit : Contains 4 packs of the most essential products for welding, soldering
- Multifunctional & Durable Steel Wire Cutter : The jaws are constructed of a high strength steel alloy, provides for resistance to rust and corrosion; Easy handling insulate grips comfortable for operation; Used in soldering, electronic device repair, jewelry processing, model making and fishing, etc
- No-clean Copper Braid Desoder Wick : Has excellent performance in desoldering, Anti-oxidation stability and anti-corrosion ability, This desoldering braid can quickly absorbed molten solder and left a clean working area, very convenient
10. EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool – Blue -Tools & Home Improvement
By EVERMARKET
- Special Design: Right or Left handed design allows easy one-handed use
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2″ length x 3/4″ diameter
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1″W x 5’L, weight 0.4oz
11. MG Chemicals – 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25′ Length x 0.075″ Width, Green -Desoldering Wicks
By MG Chemicals
- Oxide-free clean copper
- Static free bobbins
- Only pure type ‘RMA’ rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
12. TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.08” L 9.8′) -Tools & Home Improvement
By TOWOT
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work
- Warranty ：If you have any questions, please feel free to contact us at any time
- Thank you!
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design
13. Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10″, 50ft. -Tools & Home Improvement
- Price For: Each Braid Material: Copper Width: 2.5mm Length: 50ft Braid Color: Blue Leaded Process Compatible: Yes Roll Length: 50ft RoHS Compliant: Yes
14. Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length -Tools & Home Improvement
By Vastar
- Unique no clean flux for easy to use
- Pure oxygen free copper wire
- High quality desoldering braid
- Geometrically-precise weave
- Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
15. Acxico 1Pcs Desoldering Braid Wire Solder Wick Remover Sucker Cable Fluxed Flux Repair Tool 2.0mm Width,2.0m Length -Tools & Home Improvement
By Acxico
- High quality desoldering braid with unique no clean flux.
- Ergonomic dispenser design for accurately control solder length.
- 4 sizes to choose,to meet your diverse needs.( please refer to the picture size)
- Stainless steel mouth provide anti-hot protection.
- Turntable design, manual rotation of the rotating shaft, can return excess Desoldering Wire back to the box without waste.
16. Soldering Iron Kit – Soldering Iron 60 W Adjustable Temperature, Solder Wire, Tweezers, Soldering Iron Stand, Soldering Iron Tips Set, Desoldering Pump, Solder Wick, Heatshrink Tubes [110 V, US Plug] -Desoldering Wicks
By Plusivo
- Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY do-it-yourself package
- Soldering Iron Kit for many applications – necessary tools for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, for home DIY hobbyist in crafts and jewelry making and many more uses
- Premium Quality Components with safety features – high quality soldering iron, stand and all other accessories; soldering iron with adjustable temperature knob (200℃ – 450℃), 5pcs replaceable tips, heat-resistant cap and grip for maximum protection
- Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction
- Bonus Accessories – more than 15 extra items such as desoldering pump/solder sucker, tin wire solder tube, tweezers, mini wire stripper, mini screwdrivers, mini PCB, heat shrink tubes and more plus a downloadable ebook
17. MG Chemicals – 423-10 Desoldering Braid #1 Fine Braid Super Wick with RMA Flux, 5′ Length x 0.025″ Width (Pack of 10) -Desoldering Wicks
By MG Chemicals
- NSF – Nonfood Compounds Program Listed P1, NSF Registration #144208
- Oxide-free clean copper
- Manufactured under SPC guidelines
- Meets MIL-F-14256E and J-STD-004 ROLO
- Static free bobbins
- Designed to leave a residue that is environmentally safe
18. TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering -Tools & Home Improvement
By Tabiger
- HIGH QUALITY AND POWERFUL SUNCTION The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- A MUST-HAVE SOLDER REMOVAL KIT The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
- ALLOY BRAIDED SOLDER WICK Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
- DURABLE DESOLDERING IRON TOOL The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
- ONE-HANDED USE DESIGN The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
19. CHEMTRONICS 80-3-5 BRAID, DESOLDERING, ROSIN SD, 5FT -Tools & Home Improvement
By Chemtronics
- Price For: Each Braid Material: Copper Width: 2mm Length: 5ft Braid Color: Green Braid Size: #3 Features: Packaged in ESD-Safe Static-Dissipative Bobbin Flux Type: Rosin Activated RA Leaded Process Compatible: Yes RoHS Compliant: Yes
- Package dimensions:15.24″L x 7.62″W x 0.51″H
- Country of Origin:United States
- Package weight:0.8 lb
20. Aven 17542 Desoldering Wick, 2.5mm Width, 5′ Length -Desoldering Wicks
By Aven
- Unique no clean flux
- 0.1″L x 5’L
- High quality desoldering braid
- Pure oxygen free copper wire
- Weight 0.6oz
21. MG Chemicals – 426-LF Desoldering Braid #4 Fine Braid Super Wick for Lead Free Solder, 0.10″ Width x 5′ Length -Desoldering Wicks
By MG Chemicals
- RoHS compliant
- For Unleaded solder
- Specifically designed for high temperature, Unleaded solders
- Great with conventional tin/lead solders
- Use to remove Unleaded solder during circuit repair
22. MG Chemicals – 424-NS #2 No Clean Super Wick Desoldering Braid, 0.05″ Width x 5′ Length -Desoldering Wicks
By MG Chemicals
- Conforms to MIL-F-14256E RMA flux and J-STD-004
- NSF, Nonfood Compounds Program Listed P1, NSF Registration #144211
- Environmentally and PCB safe residues
- High purity, oxide-free copper
- ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
23. GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,65’Length x 0.12″Width -Tools & Home Improvement
By goot
- Brand History — Founding in 1965, GOOT had captured a 60 per cent share of Japan’s domestic market for soldering products and for almost 50 years has been providing customers with a wide range of high quality and easy-to-use soldering products.
- No fluorine, low residue, suitable for a variety of PCB circuit boards
- High Efficiency — High performance solder absorbing wire precision preparation with copper wire and special chemical formula, suitable for precision instruments (RMA corresponds to the use of standard flux)
- Good Quality — Solder wire with flat needle type preparation, soft design, fast heat transfer, suitable for fast absorption
- It not only help you improve efficiency and quality, also more environmentally friendly.
- Safety and Variety — Use at ease
- Our thin and soft desoldering wire’s flat braid has efficient thermal transmission
- Removes solder faster with better heat response than previous wicks
- Recommended for lead-free solder with high heating load.
- Any problems can be contacted by email.
- Size – 65’Length x 0.12″Width
- 100% Satisfaction Guarantee — You can return the undamaged product and packaging without any reason within 30 days
24. CCOZN 2 Pack 19.6Ft Solder Wick, No-Clean Solder Braided Wick Desoldering Wick For Solder Removal Tool, 0.1 Inch Width 3m Length for Each -Tools & Home Improvement
By CCOZN
- [Package Include] You will get 2 pack No-Clean solder braided wicks
- [Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder.
- [Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering.
- [Solder Braided Wick]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
- [Appropriate Size] Package includes 2 pack 2.5mm x 3.0 m / 0.1 inch x 9.8 ft solder wicks
25. MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool -Tools & Home Improvement
By MOGAOPI
- ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
- ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
26. MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1″ Width x 5′ Length, Blue -Desoldering Wicks
By MG Chemicals
- Suitable for Use in Food Facilities as a Non-Food Chemical—Canadian and NFS recognition letters available on request
- High purity, oxide-free copper
- Conforms to MIL-F-14256E RMA flux and J-STD-004
- ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
- Environmentally and PCB safe residues
27. DaFuRui solder wick，10 Pack No-Clean solder wick braid solder remover sucker tool for Desoldering Wicks（1.5mm/2mm/2.5mm/3mm/3.5mm Width 1.5m Length) -Tools & Home Improvement
By DaFuRui
- Applicable Occasions The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Improves work efficiency, ot damage the PCB board.
- All Packaging Include 10 packs No-Clean Solder Braided Wicks.Enough quantity and length for your daily needs
- Low Residue SolderingThe precision wick helps to clean the solder and avoid short circuit, especially in small and soldering areas.
- No-clean good design The solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to removing them from the boards
- Excellent performanceThe Braided Desoldering Wicks are made of 100% copper wires.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
28. Solder Sucker Desoldering Wick Kit，Solder Wick & Desoldering Pump,Sucker & Solder Wick(2.5mm Width, 1.5m Length) Vacuum Pump Solder Removal Tool -Tools & Home Improvement
By Tabiger
- Easy to Use:It is very convenient to use, it can well remove the existing solder from the circuit board
- Convenient Design:The solder sucker with concise construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
- High-quality Solder Sucker:The pump body for desoldering is made of aluminum, which can resist impact, corrosion and has good heat dissipation
- The suction wire for desoldering has a precise geometric braid of copper and rosin, and there will be no cuts after a period of time or bend.
- Perfect Solder Removal Tool: The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
- Quickly remove the residue, heat the solder and press the button and solder slag, all the solder is sucked away, super easy to desolder.
- Desoldering Wick： Each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long .It could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
29. American HAKKO FR301-03/P ESD Safe Portable Desoldering Tool with Precise Temperature Control °F /°C -Desoldering Wicks
- Ergonomic grip design to minimize stress on your hand and wrist
- Closed-loop sensor integrated heating system for improved thermal performanc
- Easy-to-clean solder recovery chamber minimizes maintenance and reduces waste
- Compatible with lead-free solders
- Unique pump design that lowers vibration and noise, but improves vacuum pressure and flow
- Easy-to-use adjustable temperature control built into the handle
- Fast release tool for the quick-change nozzle system
30. ECG J-045-DS Electric Corded De-Soldering Iron, 420 Degree C Tip Temperature, 45W -Desoldering Wicks
By ECG
- Country Of Origin: Taiwan, Province Of China
- Item Package Weight: 0.512 lb
- Model Number: J-045-DS
- Item Package Dimension: 12.5″ L x 5.25″ W x 1.5″ H
31. Lesnow Solder Wicks，No-Clean Solder Wick，10ft Length 2 Pieces Desoldering Braided Wicks. Solder Removal Tool，Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components -Tools & Home Improvement
By Lesnow
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
32. YIHUA 929D-V Electric Vacuum Desoldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering -Tools & Home Improvement
By YIHUA
- Questions and Suggestions are welcome
- Plus, our team is providing professional assistance 24/7 on Amazon
- YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Choose YIHUA with Confidence – Our US-exclusive 12-month manufacturer warranty will apply to your purchase
- This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions
- NOTE: change the nozzle after the desoldering iron has cooled completely.
- You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze
- This is a plug-n-play desoldering iron
- Meanwhile, we also included 2 different and interchangeable diameters (φ0.8mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused
- NOTE: This model only works on 110-127V with its USA plug.
- You can desolder joints after joints without your hands feeling uncomfortably hot.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously
- If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is an great choice.
- Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go
33. 4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches) -Tools & Home Improvement
By YCD
- Safe and clean to use.
- Made of brass wire, it is cleaner than traditional sponges
- No-clean desoldering core – 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper wire, it has strong ability to absorb tin
- Soldering Iron Tip Cleaner – the best Soldering iron Tip Cleaner and base, no water,does not reduce the tip temperature
- Rosin – weighs 0.35 oz/10 g
- Welded 4-in-1 set—- contains 4 necessary welding products, saving you time to purchase multiple times.
- Solder wire – weight 1.76 oz / 50 g
- Good fluidity, uniform heating, uniform solder joints, clean, contribute to the rapid completion of welding.
- Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections.
- No cleaning, low residue
- Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards.
34. Relife Low Residue Desoldering Wick Braid No-Clean Solder Flux Remover Wick Cord For Phone BGA Cleaning Repair Tool – 3.5mm Width 2.0M Length -Tools & Home Improvement
By DIYPHONE
- Widely Used of Solder Wick: The desoldering solder wick can be used to correct mistakes on PCB board, remove components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on SMD components and more
- Desoldering Solder Wick Braid: Solder braid with the size 3.5mm Width, 2.0m Length, this desoldering wick with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
- Solder Removal Tool: 1pcs desoldering solder wick, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder
- Weaving Design: Efficiently absorb excess solder when removing tinan solder holes, Adsorption tin paste clean, low residue, suitable for precision circuit board use, reduces the risk of damage to the motherboard
- Hight quality Shell: The body of the desoldering pen shell is made of high quality ABS, which make the solder sucker delicate and durable, make it comfortable to hold, thus it can be used for a long time
35. 2.0MM Width 2.0M Length Desoldering Wick Braid with Thumb Wheel Dispenser Welding Solder Remover Wick No-cleaning Welding Cord For Computer PCB Board Small Points Cleaning -Tools & Home Improvement
By DIYPHONE
- Widely Used of Solder Wick: The desoldering solder wick can be used to correct mistakes on PCB board, remove components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on SMD components and more
- Weaving Design: Efficiently absorb excess solder when removing tinan solder holes, Adsorption tin paste clean, low residue, suitable for precision circuit board use, reduces the risk of damage to the motherboard
- Hight quality Shell: The body of the desoldering pen shell is made of high quality ABS, which make the solder sucker delicate and durable, make it comfortable to hold, thus it can be used for a long time
- Desoldering Solder Wick Braid: Solder braid with the size 2.0mm Width, 2.0m Length, this desoldering wick with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
- Solder Removal Tool: 1pcs desoldering solder wick, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder
36. EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool,Blue – 2 Packs -Tools & Home Improvement
By EVERMARKET
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2″ length x 3/4″ diameter
- Special Design: Right or Left handed design allows easy one-handed use
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1″W x 5’L, weight 0.4oz
37. NTE Electronics SW04-10 No-Clean Solder Wick with Anti-Static Bobbin, 4 Blue.098″ Width, 10′ Length, One Size -Welding Equipment & Accessories
- Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
- Available with standard or anti-static bobbins
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes
- 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
38. 5PCS 1.5m Solder Wick Desoldering Braid Wire Solder Remover 1.5/2.0/2.5/3.0/3.5mm to Choose for Soldering Iron Station -Tools & Home Improvement
By Walfront
- Remove Solder — Quickly remove unwanted solder when used with a soldering iron.
- Wide Application — Ideal for the desoldering of print circuit board, computer motherboard, mobile phone board, etc.
- Quality Service — We strive to provide you with high quality and convenient service
- Solder Braid Wire — Provide multiple width of solder wick for different desoldering requirements.
- High purity oxygen-free copper wire.
- You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply.
- Little Remains — Good effects in desoldering and tin suction, little remains
39. YIHUA 853D 2A USB SMD Hot Air Rework Soldering Iron Station, DC Power Supply 0-15V 0-2A with 5V USB Charging Port and 35 Volt DC Voltage Test Meter -Tools & Home Improvement
By YIHUA
- All three stations can be used simultaneously or independently.
- Extended Lifespan – A series of assistive functions to help preserve your station in mint condition for longer
- These functions include sleep mode, automatic shut-down, and more.
- We equipped the station with a 0.5A/5V USB port so you can test or work on devices while they’re powered.
- You’ll not only save on electricity bills but also the cost to replace wearable parts
- The 853D Series comes equipped with a soldering iron station, a hot air rework station, and a DC power supply (with voltmeter mode)
- This way, you can enjoy a more efficient and smoother soldering/rework experience.
- Questions and Suggestions are welcome
- NOTE: Spare parts are readily available in this store
- Precision – Both the soldering station and the hot air rework station comes with high precision PID temperature stabilization function to maintain them at the set temperature
- CAUTION: MUST NOT be plugged directly into a 220V~240V electrical outlet
- This model works on 110-127V with its USA plug
- Choose Yihua with confidence- this product includes quality accessories and tools to provide an optimal experience for your work
- Plus, our team is providing professional assistance 24/7 right on Amazon
- Specifications – You can set the soldering station from 392~896°F, the hot air rework station from 212~896°F with adjustable air volume (120L/Min Max.), the DC power supply from 0~2A / 0~15V in output mode or, measure 0~35V DC in test mode
- 1 = 3 – You now get three professionally integrated stations in one compact package
- 12-Month USA Warranty (Exclusive)
40. MG Chemicals Desoldering Braid #424 Fine Braid Super Wick with RMA Flux, 5′ Length x 0.05″ Width, Yellow -Welding Equipment & Accessories
By MG Chemicals
- Oxide-free clean copper
- Static free bobbins
- Designed to leave a residue that is environmentally safe.NSF – Nonfood Compounds Program Listed P1, NSF Registration #144208.ESD Safe Spools – Yes
- Manufactured under SPC guidelines
- Only pure type ‘RMA’ rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
41. MG Chemicals 425-LF Desoldering Braid #3 Fine Braid Super Wick for Lead Free Solder, 0.075″ Width x 5′ Length -Welding Equipment & Accessories
By MG Chemicals
- Use to remove Unleaded solder during circuit repair
- Specifically designed for high temperature, Unleaded solders
- Great with conventional tin/lead solders
- RoHS compliant
- For Unleaded solder
42. MG Chemicals 427 Desoldering Braid #5 Fine Braid Super Wick with RMA Flux, 5′ Length x 0.125″ Width, Brown -Welding Equipment & Accessories
By MG Chemicals
- Manufactured under SPC guidelines
- Only pure type ‘RMA’ rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Static free bobbins
- Designed to leave a residue that is environmentally safe
- Oxide-free clean copper
43. DaFuRui solder sucker desoldering pump & solder wick，3 Pack soldering sucker pump and 2 Pack solder wick braid(2.5mm Width, 1.5m Length) solder remover sucker tool for Desoldering Wicks -Tools & Home Improvement
By DaFuRui
- Low Residue SolderingThe precision wick with 2.5mm width/1.5m length helps to clean the solder and avoid short circuit, especially in small and soldering areas.
- Special design method：Right or Left handed design allows easy one-handed use.
- Excellent performance：Excellent thermal transfer for faster, safer desoldering using lower temperature irons.
- Powerful suction power：Super high pressure vacuum with aluminum body frame，can remove solder from a printed circuit board effectively.
- Brand new High quality： desoldering braid with unique no clean flux and gemetrically- precise weave.
44. MG Chemicals – 452 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 50′ Length x 0.05″ Width, Yellow -Welding Equipment & Accessories
By MG Chemicals
- Manufactured under SPC guidelines
- Only pure type ‘RMA’ rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Static free bobbins
- Designed to leave a residue that is environmentally safe
- Oxide-free clean copper
45. CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1/0.08 Inch Width 1.5 Meter Length -Tools & Home Improvement
By CCOZN
- [Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick and 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick.
- [Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering.
- [Package Include] You will get 3 packs No-Clean Solder Braided Wicks
- [Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
- [Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder.
Desoldering wick – The Buyer’s Guide
You must have checked the above list, aren’t you mind-blown by the quality of products? Well, if you are then here’s a secret formula which we’ve used to choose them. You can use them too! The best part is, it works for all the product purchases you make! Besides, wouldn’t it be helpful to you, if you knew the factors we’ve considered to choose the desoldering wick in the above list? So shall we begin with the guide and help you learn about the important factors?
1. Does it have the features you need?
Wait for a minute before you buy the desoldering wick, check if it has all the features in your requirement list! If it doesn’t have them, then you should avoid buying that particular model and start looking for an alternative. We always suggest our editors to make a list of important features before adding a product to a list and based on the feature, the quality of the product, brand-assurance, rank it! So if it has all you need, you should not mind paying a bit extra. However, if you end up buying the best desoldering wick which doesn’t have the feature you need the most, then it won’t make sense! Would it? To us, it wouldn’t! That’s why you should make up a list which includes the features you are looking for, technical specifications if any, etc and come up with a budget.
2. Budget and Price Match
Well, you obviously can’t buy the best desoldering wick with a low budget. That’s why it’s important to make note of all the important features, specs, factors and come up with a budget. Once you are ready with it, look for the products which are either equal to your budget or are close to it. Stick to the budget, because while browsing, you’ll see a model which is slightly better and has an additional feature with a really small price difference. Well, in that case you’ll have to calculate the price of the product which has all the required features and the desoldering wick with the additional features. See if the difference in amount is worth for the feature? If you don’t have second thoughts, you shall probably increase your budget.
3. Warranty and Brand
Most of the desoldering wick industry experts we got in touch suggested us to always buy the one which comes from a reputable brand. They also explicitly asked us to include the best brands so that users don’t buy the models from unknown brands or non-reputable companies. Because desoldering wick from an unknown brand might be cheap at first glance, but could have high-maintenance and could cost a lot in repairs.
Another benefit of buying a desoldering wick from a reputable brand would be warranty. Most of the desoldering wick from reputable brands come with good warranty. However, cheap products do come with a warranty, but claiming it can be a herculean task. That’s why buy the models which come from known brands and have good warranty.
4. Check for Reviews and Ratings
Back then when the Internet wasn’t as big as it is today, local stores charged high and even ended up selling the products which sucked or wasn’t future proof. It’s because the salesman threw technical terms and confused the buyer. But nowadays, there are sites like ours which does all the research and lists down the best models and there are eCommerce stores like Amazon which has user reviews which can be read to know the experience of the user with that particular desoldering wick. Isn’t it great?
The Verdict
We hope that you loved the desoldering wick we’ve listed in our best list. If it has been helpful, please bookmark our website and share it with people you know whenever they plan to buy something.
To wrap up this guide,
- If you are looking for the best desoldering wick: You shall consider going for American HAKKO FR301-03/P ESD Safe Portable Desoldering Tool with Precise Temperature Control °F /°C
- If you want the one which has similar features to the best, then you shall consider going for YIHUA 853D 2A USB SMD Hot Air Rework Soldering Iron Station, DC Power Supply 0-15V 0-2A with 5V USB Charging Port and 35 Volt DC Voltage Test Meter
- If you want a desoldering wick which is “value for money” then you shall go for the MG Chemicals – 452 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 50′ Length x 0.05″ Width, Yellow
- If you want the cheapest desoldering wick then the Aven 17542 Desoldering Wick, 2.5mm Width, 5′ Length should be the best one for your needs!
