The best tonneau cover for a Honda Ridgeline depends on how you use its bed and in-bed trunk. For a straightforward soft folding cover, start with the TYGER T3 TG-BC3H1065. Choose the ACCESS Original 16039 if you prefer rolling the cover toward the cab, or the Peragon Landmark Classic if you want retracting aluminum panels and a separate key lock.
These recommendations focus on the 2017–2026 Ridgeline. Match the exact truck year and cover application before ordering: a listing described simply as a “5-foot bed” is not enough, and these applications should not be transferred to an older Ridgeline or another pickup. Our choices reflect the manufacturers’ fitment information and operating instructions.
Best Ridgeline tonneau covers at a glance
| Cover | Best reason to choose it | Main compromise |
|---|---|---|
| TYGER T3 TG-BC3H1065 | Soft tri-fold with a Ridgeline-specific bracket kit | Folded panels remain over the front of the bed; full trunk clearance is not specified |
| ACCESS Original 16039 | Roll-up access with adjustable vinyl tension | The side rails restrict full trunk-lid opening |
| Peragon Landmark Classic | Aluminum panels, key locking and no permanent storage canister | Panels need room to retract into the bed; rails limit trunk opening to about 22 inches |
1. TYGER T3 TG-BC3H1065: best for a simple folding layout
The TYGER T3 TG-BC3H1065 is listed for 2017–2026 Honda Ridgelines with the 5-foot-4-inch, 64-inch bed. It combines a vinyl covering with an aluminum frame and folding support bars. This is a useful starting point if you want to uncover the rear bed area without rolling and retensioning a fabric cover.
Its Ridgeline installation guide shows four factory screws being removed and dedicated front and rear brackets installed. Budget time for bracket placement and seal alignment, rather than treating “no drilling” as “no installation work.” The folded cover must be secured with its buckles before driving.
Check before buying: TYGER says an over-the-bedrail liner needs openings cut for the clamps; an under-the-bedrail liner does not require that modification. Confirm any utility-track, rack or other accessory arrangement with TYGER. The documentation does not establish an exact trunk-opening angle, so do not buy it on an assumption of unrestricted trunk access.
Tradeoff: this is a soft cover, not a rigid cargo platform. Keep loads from pushing into it and follow the guide’s instructions for snow removal and securing the folded assembly. The exact product page now specifies a five-year U.S. warranty; older lifetime-warranty descriptions should not be used for a new purchase without confirmation.
2. ACCESS Original 16039: best for roll-up access
The ACCESS Original suits owners who regularly carry tall items and prefer a cover that rolls toward the cab. Its cord operates the two rear latches, while tension dials adjust the vinyl without tools. The cover sits approximately 1½ inches above the box and uses straps to hold the rolled assembly.
ACCESS identifies 16039 in its Ridgeline fitment selector; the same part appears for the 2017 application. Select your own year before checkout. Its Ridgeline-specific instructions use brackets attached at factory bed-wall bolt locations, so the general clamp-installation description is not the complete installation procedure for this truck.
Check before buying: ACCESS explicitly says the trunk remains usable but cannot open fully. Its Ridgeline rail instructions also say not to force the trunk lid beyond that limit. This is a meaningful compromise if you frequently load bulky objects into the trunk.
Tradeoff: rolling the cover clear does not remove its side rails. The owner’s manual prohibits placing objects on the cover or frame, using the frame as a cargo tie-down, or standing on it. It also warns that moisture and dust can still enter the bed.
3. Peragon Landmark Classic: best for retracting aluminum panels
The Peragon Landmark Classic for the Ridgeline is the most relevant option here when rigid panels and a separate key lock matter more than a soft cover’s simpler layout. The Classic edition uses a single key-operated deadbolt. Other Landmark editions have different locking features, so compare the selected edition rather than treating them as identical.
Peragon’s Ridgeline fit page includes the 2017–2026 trucks covered by this guide. It specifies mounting through existing bed holes without drilling and says its rails limit trunk-lid opening to approximately 22 inches. The panels retract into the bed without a permanent canister and can be removed for larger loads.
Check before buying: allow room for the panels’ movement, not just their folded footprint. The Ridgeline operating manual requires cargo to remain clear of the cover. Peragon’s accessory guide says racks clamped to the inside bed-rail edge can interfere; over-the-rail plastic liners can also require substantial modification or be incompatible.
Tradeoff: although the fit page lists a 300-pound distributed load and a 50-pound concentrated load, the operating manual says never haul anything on the cover, never stand or sit on it, and never use it to secure cargo. Those ratings do not add vehicle payload. The manual also says the cover is not waterproof and that water-sensitive items should be removed before bad weather or a car wash.
How to choose the right cover for your Ridgeline
- Start with the exact application. Give the seller your model year, bed configuration and installed accessories. A shared nominal bed length does not establish compatibility across trucks or generations.
- Decide how much trunk opening you need. ACCESS and Peragon document restrictions. For TYGER, obtain a clearance answer before purchase if this is a deciding factor.
- Plan for tall cargo. A folded cover, a rolled bundle and retracting panels use the bed differently. Compare their open positions with the objects you actually haul.
- Protect moisture-sensitive gear separately. A tonneau is not a guarantee of a dry bed. The ACCESS manual recommends additional cargo wrapping where needed, and Peragon acknowledges water intrusion is possible.
- Keep cargo restraint separate from the cover. Secure the load using the truck’s approved provisions. Do not assume soft-cover rails can serve as tie-down anchors.
Frequently asked questions
Will a tonneau cover stop the in-bed trunk from opening?
It can reduce the opening. ACCESS confirms a restriction without giving an angle, while Peragon quotes about 22 inches of opening. TYGER’s cited documentation does not quantify it. Check clearance for the exact cover before ordering.
Will any 5-foot truck cover fit the Ridgeline?
No. Choose a Ridgeline-specific application. TYGER labels its fit as 64 inches, while ACCESS uses “5ft Bed” in its vehicle selector. The part number and truck selection matter more than that shorthand.
Can I put cargo on the cover?
ACCESS explicitly prohibits placing objects on its cover or frame. Do not use the TYGER soft cover as a loading surface. Peragon’s operating manual says never haul anything on the cover, despite the load figures on its product page.
Which one should you buy?
Choose TYGER T3 TG-BC3H1065 for a conventional soft tri-fold, ACCESS Original 16039 for roll-up access and adjustable tension, or Peragon Landmark Classic for retracting aluminum panels with key locking. Make trunk clearance and accessory compatibility the final checks before you order.
