Command Clear Refill Strips: Small, Medium and Assorted

Generic transparent adhesive strips beside an unbranded clear plastic hook.
Written by Toni Morrison

Compare Command clear refill strips by size, pack count and hook compatibility. Learn which refills to buy, how to apply them and how to remove them.

For Command clear refill strips, the best buy is the pack that matches the hooks you already own. Start with 17024CLR-ES for compatible small clear products, 17021CLR-ES for compatible medium clear hooks, or 17200CLR-ES when you need a mix of sizes. Check the original hook instructions before choosing: the word “Command” on two packages does not make them interchangeable.

We compared 3M’s product pages and installation guidance with identifiable retail packs in October 2026. This is a source-based buying guide, not a hands-on adhesion test.

Quick picks: small, medium or assorted?

  • Small clear refills: 17024CLR-ES, the identified 12-strip pack, for a matching small clear hook or decorating product.
  • Medium clear refills: 17021CLR-ES, the identified nine-strip pack, when your existing medium clear hook specifies it.
  • Mixed clear refills: 17200CLR-ES, the identified 16-strip assortment, for households reusing several compatible sizes.

These are replacement adhesive packs. They do not supply a new collection of hooks. Count the hardware you plan to reinstall and check the size it requires before comparing pack totals.

Command 17024CLR-ES: for a matching small clear product

The 17024CLR-ES listing identified here contains 12 small clear replacement strips. 3M’s small clear replacement-strip page identifies the 17024 family. Its manufacturer-authored clear-product reference also maps 17024CLR-ES to a 12-strip pack.

Choose this pack when you are replacing adhesive on the corresponding small clear hardware and do not need larger strips. It is a more focused purchase than an assortment if every hook in your project takes the same refill.

Read the full model number. Search results also show small clear packs under the 17022 family, different counts and older packaging. Compare the hook’s instructions, refill code and pack photo rather than selecting solely by the “small” label. If the code is missing from your old hardware and packaging, ask 3M to identify it before buying.

Command 17021CLR-ES: for compatible medium clear hooks

The identified 17021CLR-ES pack contains nine medium clear strips. 3M’s medium clear replacement-strip page describes these as refills for clear products used on suitable smooth indoor surfaces.

This is the straightforward choice if your project uses only the matching medium clear hooks. You avoid paying for small and large strips that may stay in a drawer. Keep the instruction card with the unused refills so the next installation is easy to check.

Do not confuse clear 17021CLR with white medium refill packs that have similar-looking names. Also inspect the retail package quantity: one listing can represent a single nine-strip pack, while another offer groups several packs. Compare the number of usable strips in the delivered order, rather than a generic “item count” field.

Command 17200CLR-ES: for a mixture of clear hook sizes

The identified 16-strip assortment contains eight small, four medium and four large strips. The 3M assorted clear refill page confirms the clear replacement family; the linked retail pack supplies the exact count breakdown.

An assortment makes sense when you are reorganizing multiple rooms and already own compatible hardware in several sizes. Lay out the hooks first. If you need ten medium replacements, a 16-strip variety pack with only four medium strips will not finish the job, even though its total count looks generous.

The advantage is flexibility; the drawback is unused sizes. Choose it as a small replacement supply for known compatible hooks, rather than as a universal adhesive kit. Check the count breakdown on the selected offer because the same family name can appear on different regional packs.

Weight limits belong to the installed product

3M’s weight-limit guide lists different capacities for small, medium and large clear hooks and other clear products. That is why a refill’s size label alone cannot tell you what your existing hook will safely hold.

Follow the weight limit and strip arrangement specified for the exact hook. A larger strip is not permission to overload a smaller hook. Do not add together the headline capacities of an assorted pack or assume that extra strips create a higher approved rating. Include the weight of the complete item you are hanging, including anything it will contain.

Choose the right adhesive family

Clear refills are useful where you want the attachment to blend into the surface. They are different from the paired, interlocking strips used to mount picture frames. 3M’s clear replacement guidance specifically directs frame-hanging shoppers to picture-hanging strips or hangers.

For damp bathrooms or exterior decorations, use the appropriate Bath or Outdoor product and its specified replacement strips. A transparent appearance does not establish water resistance or outdoor suitability. The manufacturer’s refill range separates these categories, making it a useful place to check the family before ordering.

Apply clear strips correctly

For the clear-hook method in 3M’s instructions, clean the surface with isopropyl rubbing alcohol and let it dry. Household cleaning sprays and wipes can leave a film that interferes with adhesion.

  1. Remove the black liner and apply the strip to the wall.
  2. Press the entire strip firmly for 30 seconds.
  3. Remove the blue liner, place the hook and press firmly for 30 seconds.
  4. Wait one hour before loading the hook.

Use the instructions supplied with your exact product if they differ. Plan the position so the removal tab remains accessible. On removal, support the hook gently and stretch the tab slowly straight down along the wall, never outward toward yourself. 3M’s clear-hook guide calls for at least 12 inches of stretch to release.

Frequently asked questions

Can I reuse the adhesive strip?

No. 3M says standard strips are for one installation. Reuse the compatible hook with a fresh replacement strip rather than trying to restick a stretched or removed adhesive.

Will these work on wallpaper or rough walls?

3M advises against wallpaper, brick and rough concrete, and does not recommend heavily textured surfaces. Its FAQs call for clean, smooth surfaces in suitable condition. For painted walls, wait until paint is fully cured for at least seven days and follow the paint and product guidance.

Why did the hook fall?

Check the surface, cleaning method, pressing time, waiting period and load. Humidity and an unsuitable adhesive family can also matter. Correct the cause and use a new strip; simply pressing the fallen hook back on is not a reliable repair.

Is the biggest pack the best value?

Only if it contains strips you can use. Compare cost per compatible replacement, including delivery, and inspect whether the offer is one pack or a multipack. We do not list fixed prices because offers change.

The bottom line

Buy the small 17024CLR-ES pack for matching small hardware, medium 17021CLR-ES for matching medium hooks, or assorted 17200CLR-ES when you genuinely need several sizes. Compatibility, sound surfaces and correct installation matter more than the largest strip count.

Image note: AI-generated editorial illustration of generic items; not a photograph of a named or recommended product.

About the author

Toni Morrison

Toni is the Senior Writer at Main Street Mobile. She loves to write about the Internet and startups. She loves to read stories of startups and share it with the audience. She is basically a Tech Entrepreneur from Orlando. Previously, She was a philosophy professor. To get in touch with Matt for news reports you can email him on toni@mainstreetmobile.org or reach her out on social media links given below.