45 Best seekins precision 30mm rings 2023 &#8211; After 206 hours of research and testing.

Monstrum Precision Scope Rings | 1 inch Diameter | Picatinny | 1.00 inch Height

9.6

Monstrum

9.6

Vortex Optics Pro Series Riflescope Rings – 30mm – Medium Height [1.0 Inches | 25.4 mm], Black

Modkin 1 Inch Scope Rings Set of 4, 2 Pieces High Profile Scope Mounts & 2 Pieces Medium Profile Scope Rings for Picatinny/Weaver Rail

9.6

Modkin

9.5

Aero Precision Ultralight 30MM Scope Mount, SPR, Black, (APRA210600)

AERO PRECISION

8.9

LONSEL 1” Scope Rings, 2Pcs High Profile & 2Pcs Medium Profile 1 Inch Scope Mount Rings for Picatinny Rail – Pack of 4

LONSEL

8.8

Monstrum High Profile Picatinny Scope Rings with See-Through Base | 1 Inch Diameter

Monstrum

8.6

Vortex Optics Riflescope Bubble Level 30-mm

Vortex Optics Sport Cantilever 1-Inch Mount – 2-Inch Offset

8.5

8.5

Best seekins precision 30mm rings in 2023

1. Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance -Torque Wrenches

By Wheeler

GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler
Please contact Wheeler customer service for assistance
EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field
INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case
ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds; 40 – 65 is +/- 5%
The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches
DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”
RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds
LONGTERM USE: Always return to the lowest inch/pound setting after use

2. Vortex Optics Hunter 1-inch Riflescope Rings – Medium Height (0.87 in) -Sports & Outdoors

By Vortex

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
Made from aircraft-grade 6061-T6 aluminum for optimum strength.
Sold two rings per package.
Base Clamp Screws:25-30 in/lbs
These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.

3. Monstrum Precision Scope Rings | 1 inch Diameter | Picatinny | 1.00 inch Height -Sports & Outdoors

By Monstrum

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
1 inch diameter rings for mounting standard 1 inch rifle scope tubes
Available with either Picatinny or Weaver standard base
Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch
1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

4. Vortex Optics Pro Series Riflescope Rings – 30mm – Medium Height [1.0 Inches | 25.4 mm], Black -Sports & Outdoors

By Vortex

0 Inches (25
Sold two rings per package.
Fits Weaver and Pica tinny Rails
7 Grams – 1
These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1
The finishing touch to your rifle and optic combination
Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
Weight (Per Ring): 48
72 oz
Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
4 mm) from the base

5. Modkin 1 Inch Scope Rings Set of 4, 2 Pieces High Profile Scope Mounts & 2 Pieces Medium Profile Scope Rings for Picatinny/Weaver Rail -Torque Wrenches

By Modkin

Lightweight and Durable: Aluminum alloy with black anodized surface, sturdy and lightweight
Size Detail: Medium Profile Dimension: 1.9 x 1.6 x 0.8 inch, Weight: 2 ounce; High Profile Dimension: 2.0 x 1.6 x 0.8 Inch, Weight: 2 ounce.
The hollowed out is designed to be extremely lightweight and provide potential vision.
Suitable for all 1 inch / 25.4mm scope tube.
Rail Clamp Screw Design: With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly
Built-in Tape Protection: Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.
Comes with 2 pieces allen wrench.
Perfect for All 21mm Picatinny/ Weaver Rails: This set includes 2 pieces medium profile and 2 pieces high profile

6. Aero Precision Ultralight 30MM Scope Mount, SPR, Black, (APRA210600) -Sports & Outdoors

By AERO PRECISION

Mounting rings are pushed forward 2″ for better eye relief
Ridged and lightweight; Made in the USA
Designed for mil-spec upper receivers with 1913 Picatinny rail
MIL-A-Type 3 black hard-coat anodize
6061 T6 extruded aluminum construction

7. LONSEL 1” Scope Rings, 2Pcs High Profile & 2Pcs Medium Profile 1 Inch Scope Mount Rings for Picatinny Rail – Pack of 4 -Sports & Outdoors

By LONSEL

High Quality Aluminum, Solid & DurablePrecision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish
Hollowed-Out Design & Built-In Tape ProtectionDesign in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope
Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field.
Available in two styles, A must have scope rings for hunting shooting!
Comes with 2 pcs allen wrench.
These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1”/ 25.4mm scope tube
Perfect for All 21mm Picatinny RailsLONSEL 4 set of different heights 1” scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package
4 Set Of Two Styles 1” Scope Rings2 Pcs Medium Profile: 0.5” gap from base of mount to bottom of ring, Item Height 1.9”, Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring; 2 Pcs High Profile: 0.71” gap from base of mount to bottom of ring, Item Height 2.0”, Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
Rail Clamp Screw Design & Easy To InstallWith 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1” scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

8. Monstrum High Profile Picatinny Scope Rings with See-Through Base | 1 Inch Diameter -Torque Wrenches

By Monstrum

High profile scope rings for the Picatinny mounting platform with a see-through channel to allow for concurrent usage of the front iron sights
Please check the tube diameter of your scope before purchasing.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
Available in 1 inch and in 30 mm diameter versions
All Monstrum mount and accessory products come with a lifetime guarantee

9. Vortex Optics Riflescope Bubble Level 30-mm -Sports & Outdoors

By Vortex

Included components: Accessories
Use the bubble level to ensure that the rifle is perfectly vertical.
Use on 30-mm riflescope tube for the most precise long-range shooting.
Mounts quickly and easily to the riflescope tube.
This will eliminate potential error caused by shooting a canted rifle.

10. Vortex Optics Sport Cantilever 1-Inch Mount – 2-Inch Offset -Sports & Outdoors

By Vortex

Weighs 6.7 ounces
Aluminum construction
Use this cantilever mount for mounting 1-inch telescopic sights
The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base
The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement

11. Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 1.00 inch Height -Sports & Outdoors

By Monstrum

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch
30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts

12. Aero Precision Ultralight 30mm Scope Mount, Extended, Anodized Black (APRA210500) -Sports & Outdoors

By AERO PRECISION

6061 T6 extruded aluminum construction
Department Name: Unisex-Adult
Designed for mil-spec upper receivers with 1913 Picatinny rail
MIL-A-Type 3 black hard-coat anodize
Rear ring is pushed forward 1″ for better eye relief

13. Vortex Optics Tactical 30mm Riflescope Ring — Medium Height [0.97 Inches | 24.6 mm] – 2 Pack -Sports & Outdoors

By Vortex Optics

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.
This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.97 inches (24.6 mm) from the base.
Sold two rings per package.
When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

14. Real Avid Gunsmithing Torque Wrench Kit | All in One Torq Driver Tool with Screwdriver Bit Set & Accurate 1 Inch/Pound Setting for Precision Scope Mounting. Premium KIT. -Sports & Outdoors

By Real Avid

Real Avid Gunsmithing Torque Wrench Kit | All in One Torq Driver Tool with Screwdriver Bit Set & Accurate 1 Inch Pound Setting for Precision Scope Mounting. Premium KIT.

RUBBERIZED grip and optional Force-Assist driver handle make it effortless to tighten screws and fasteners accurately.
PREMIUM KIT: includes protective, high-density, easy-storage case
INCLUDES premium storage case and set of 12 1/4’’ inch bits commonly used by leading brands of scope rings & bases for optics mounting.
PRECISION torque driver wrench kit specifically developed for scope mounting, gunsmithing, maintenance and more
ACCURATE 10-70 inch-lb range with distinct 1 inch/pound increments allow for repeatable exact settings and strict adherence to desired torque specifications.
Compatible with any standard 1/4 ‘’ bits.
COMPATIBLE with most rings and bases such as Weaver, Leupold, Warne, Vortex, Zeiss, Sig Sauer, Tract, Nikon, Talley, Seekins Precision, Night Force, Burris, MDT, Steiner, XLR, Ruger, Badger Ordnance, Sight Mark and more.
EASY to read scale window and visual, audible click feedback prevents damage from overtightening screws and eliminates guesswork.

15. Monstrum Precision V2 Scope Rings | 34 mm Diameter | Picatinny Base | 1.00 inch Height -Sports & Outdoors

By Monstrum

Confirm your rifle’s mounting base before purchasing.
1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount
Available for either Picatinny or Weaver standard mounting platforms
34 mm diameter rings for mounting standard 34 mm rifle scope tubes
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts

16. Modkin Rifle Scope Rings, Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2) -Sports & Outdoors

By Modkin

Double scope ring mount for Picatinny/ Weaver Rail (21mm).
Medium profile, 0.5” gap from base of mount to bottom of ring
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1” scope firmly, just twist off the nut and mount the base on the 20mm rail easily.
( Item height: 1.9”)
Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
The ring is for most scopes which are in 1”/ 25.4mm scope tube

17. Leupold Rifleman Scope Rings -Sports & Outdoors

By Leupold

Detachable aluminum rifle scope mount rings
Matte Black
1 inch tube diameter
.987″ high

18. Monstrum Tactical Scope Ring Set for Picatinny/Weaver Rails | 1 inch Diameter | Medium Profile -Sports & Outdoors

By Monstrum Tactical

Light weight 6061 aerospace aluminum construction
All Monstrum Tactical mount and accessory products come with a lifetime guarantee
Mounts to any flat top Picatinny or Weaver rail equipped rifle
1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes
High profile in height, 0.395 inches from base of mount to bottom of rings

19. Wheeler Scope Ring Alignment and Lapping Kit Combo, 1 Inch and 30mm Lapping Bars, Compound for Scope Mounting and Leveling -Sports & Outdoors

By Wheeler

INCLUDES: Two 1 Inch Alignment Bars, One 1 inch Lapping Bar, Two 30mm Alignment Bars, One Lapping Bar Handle & 220 Grit Lapping Compound
GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler
Please contact Wheeler customer service for assistance
FUNCTION: Lapping the inside scope rings will reduce or eliminate any shifting of the scope inside the rings
EASE OF USE: The short bars let you know when the front ring is in perfect alignment with the rear
RELIABLE: Alignment bars provide the perfect alignment of both rings and will also diagnose any vertical or horizontal misalignments
SPCES: Compatible with 1 inch and 30mm scope rings

20. AccuShot Picatinny/Weaver Medium Profile 2-piece 1-inch Rings -Sports & Outdoors

By UTG

SCOPE MOUNTS

Related Posts :

21. Scope Mounting Bubble Level,Scope Leveler Kit,Magnetic Bubble Level,Precision Scope Level Bubble Clip and Bubble Levels -Hunting

By Generic

Quickly and Accurate Level Optics
Machined aluminum levels from aircraft grade aluminum with a hardcoat anodization It’s more durable and featuring precise bubble vials
Kit includes one scope turret level and one gun clamp level
Levels come in the protective foam carrier

22. Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Low Profile -Sports & Outdoors

By Monstrum

Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing
Compatible with both Picatinny or Weaver mounting bases.
All Monstrum products are now protected by Monstrum’s lifetime guarantee
Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings
Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts
Available in 1 inch or 30 mm diameter

23. Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | Medium Profile -Sports & Outdoors

By Monstrum

Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target
30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts
Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch

24. Monstrum Precision Picatinny Scope Rings with Integrated Level Bubble | 1 inch Diameter | Medium Profile -Sports & Outdoors

By Monstrum

Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts
Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target
1 inch diameter rings for mounting standard 1 inch rifle scope tubes
Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
Available in three heights to match your needs: Medium Profile 1.00 inch, High Profile 1.20 inch, and Extra High 1.35 inch

25. Vortex Optics Precision Matched Rings 34mm – Height 1.45 inches -Sports & Outdoors

By Vortex Optics

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.
Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.
Made in the USA.
Hex wrench included
These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.45 inches (36.8 mm) from the base
Sold two rings per package
Will only work with Picatinny spec mounts—will not work with Weaver mounts.
These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

26. Athlon Armor 34 mm Low Height (0.96″) Scope Ring -Sports & Outdoors

By Athlon Optics

Aircraft Grade Aluminum provide extra strength and durability to handle the toughest terrain and offers lifetime of use.

27. Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 1 inch Diameter -Sports & Outdoors

By Monstrum

Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes
Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
Mounts to any flat top Picatinny rail equipped rifle platform
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

28. Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount – 2-Inch Offset , black -Sports & Outdoors

By Vortex

Weighs 8.9 ounces
This mount positions the center of the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base.
The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish.
This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.
The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.
Made with pride in the USA.

29. ZEISS Precision Ultralight 1913 Mil-Spec Rifle Scope Mounting Rings with Anti-Cant Bubble Level, 30mm, Medium, Black -Sports & Outdoors

By ZEISS

DURABLE & ULTRALIGHT: Approximately 4.41 oz
with screws (pair 30mm low); Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish; Hard Case and T15 and T25 Torx driver bits included
RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil
REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware; Type 303 stainless steel top cap screws with black oxide finish; Micro-radiused on all machined leading edges to ensure a non-marring design
BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring
1.0-inch / 25.4-mm

30. Weaver Tactical Rings 30mm, Six Hole, Medium, Matte Black -Sports & Outdoors

By WEAVER

Medium
Six Hole Tactical-style Rings
Note: Rings fit scopes with 30mm tubes and up to 40mm objective lenses
Matte, Black
Tube Diameter- 30 mm

31. Weaver 48349 Tactical Rings, 1″, Six Hole, Medium, Matte -Sports & Outdoors

By WEAVER

Available in three height options
Tube Diameter- 1″
Available in 1″ and 30mm diameters
Zero stays true
Six Hole Tactical-style Rings
Medium Height
Matte, Black
Aircraft-grade aluminum
1″ Medium Ring Height (Base to Bottom of Tube): 0.313″
Six points of contact

32. 2 pcs Optics Riflescope Scope Bubble Level for 1 inch / 30mm Riflescope Tube -Sports & Outdoors

By YOTOM

Use the bubble level to ensure that the riflescope is perfectly vertical ;
Used on 1-inch riflescope tube for the most precise leveling
Mounts quickly and easily to the riflescope tube; Set of 2;
Scope Bubble Level will eliminate potential error caused by mounting
Made from high quality mil spec aluminum with CNC machines.

33. Talley 700-721-722-725-40X Scope Mount, Black, 30mm/Medium -Sports & Outdoors

By Talley

Made in the USA
NOTE: 30mm Remington 700 Low
Withstands all magnum calibers
Rigid construction ensures zero will be held through thousands of rounds

34. Warne Scope Mounts Maxima Horizontal, 30mm, PA, Optic Rings, High, Matte Black -Sports & Outdoors

By WARNE

Package Weight: 0.045 kilograms
Precise, rugged, and easy to use
Package Dimensions: 10.16 H x 2.54 L x 5.08 W (centimetres)
Country of Origin : United States

35. Burris 420588 Signature Zee Rings (Matte, 30 mm Rings) -Sports & Outdoors

By Burris Optics

This product is manufactured in United States
Burris signature zee mount rings with 30mm, medium, matte
0.81 inch Height

36. Seekins Precision 30mm Tube .87″ Medium 4 Cap Screw Scope Ring -Sports & Outdoors

By Seekins Precision

Country Of Origin : United States
4 cap screw
.87″ Medium
Perfectly CNC Machined 7075-T6 Billet

37. Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height – Low -Sports & Outdoors

By Monstrum

Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts
0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch
Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
30 mm diameter rings for mounting standard 30 mm rifle scope tubes

38. NightForce X-Treme Duty Ultralite Aluminum 30mm 4 Screw Ring Set – .885″ Low (A118) -Sports & Outdoors

By NightForce

CONSTRUCTION – The unique construction of the rings provides strength well beyond that normally found in lightweight rings
If you think you need 50% more clamping force, the six-screw Ultralite Rings will hold your scope under any conceivable situation
HIGH PERFORMANCE RINGS – The four-screw ring will provide a lifetime of service for most applications
NIGHTFORCE X-TREME DUTY ULTRALITE RINGS – Nightforce X-Treme duty ultralite rings are available in both four-screw and six-screw versions
MATERIALS – Rings sets are crafted of machined 7075-T6 hard anodized aluminum, with titanium crossbolts and jaws, they give you the performance of steel at half the weight
Use a torque wrench and do not exceed recommended torque values
NOTE – Clean all mating surfaces thoroughly before mounting

39. Vortex Optics Precision Extended Cantilever Mount – 34mm – 20 MOA -Sports & Outdoors

By Vortex

These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.
The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.
Use this cantilever mount for mounting 34mm tubes
Built-in 20 MOA cant.

40. Independence Mount (Independence Mount) -Sports & Outdoors

By Swampfox

Ring diameter: 30mm
Material: 6061 aircraft grade aluminum
Centerline height: 1.5
Mounting base length: 2.7″
Finish: Anodized matte black

Related Posts :

41. E.T Dragon 30mm Dovetail Scope Mount Rings Medium Profile for 11mm Dovetail Scope Rings (2 Pieces) -Sports & Outdoors

By E.T Dragon

Scope Rings Type: Medium Profile (14mm),Fit for a .22 rifle or an air rifle using a 3/8 3/8 dovetail scope rings or 11mm dovetail mount
Scope rings are for standard riflescopes 30mm scope tube ,Two (2) rings per package ,Backed by Canis Latran the 1-year limited warranty
Threadlocker Medium Strength Gift :The Update Process .The use of larger plum screw,torque greater ,firm ,anti-wear ,anti-deformation
Complete Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
Note: This scope mount rings are designed to be fit the scope within 30mm by allowing tolerance range, so the screw threads not finished and there is a gap between two clips, it’s normal phenomenon.
With four screws Design: it will hold the scope more securly than a single screw on both sides

42. Nightforce Optics 1-Piece, Matte Black -Hunting

By Nightforce Optics

COMPATIBLE WITH – Nightforce X-Treme Duty bases are designed to fit long action Remington 700 guns; 2-piece and 1-piece configurations are available for this model
BEST USES – These Nightforce steel bases are best used when installed on a 20 MOA; 20 MOA is generally used for shooting 500 – 1000 + yards depending on your scope and caliber
NOTE – Clean all mating surfaces thoroughly before mounting; use a torque wrench and do not exceed recommended torque values (Base Screws: 25 in-lb)
HIGH-QUALITY BASE – Bases are constructed from heat-treated, high-strength steel and CNC machined from a single steel billet to closely match the receiver contour
RELIABLE CONSTRUCTION – The scope bases match the receiver contour, ensuring straight and true alignment; scallops on the side will not interfere with loading or extraction

43. Leupold Mark 4 Scope Rings Matte, 35mm High (Aluminum) -Sports & Outdoors

By Leupold

Product Type: SPORTING GOODS
Package length: 11.43 cm
Package width: 11.176 cm
Package height: 1.777 cm

44. Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | Medium Profile | Flat Dark Earth -Sports & Outdoors

By Monstrum

Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch
30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes

45. Arken Optics Halo Scope Rings Precision Picatinny Riflescope Mounts(30mm, Low) -Sports & Outdoors

By Arken Optics

The optic manufacturer’s specification shall always supersede Arken’s Halo Rings specification, unless higher.
Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting
Hex wrench included.
With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.
Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws
Available in 30mm or 34 mm diameter
ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions
Only work with Picatinny spec mounts—Not work with Weaver mounts.
Halo scope rings are t serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize for added protection against scratches and blemishing.