The right zero-turn lawn striping kit is the one designed for your mower’s exact model and deck. Start with the equipment label, deck construction and model year. A kit advertised for a 54-inch deck may fit one machine and miss the mounting points on another.
This guide compares four identifiable replacement kits and a mower-specific roller option using manufacturer information. It also explains what a striper can change, the installation checks that matter and why a heavy tow-behind lawn roller is a different purchase.
Quick picks by mower family
- Cub Cadet Ultima with a compatible fabricated deck: check the 19A70059OEM family and its current 19A70059GFP replacement.
- Cub Cadet Ultima with a compatible stamped deck: check 19A70060OEM and the replacement 19A70060GFP.
- Select Ariens or Gravely models: verify kit 79206700 against the manufacturer’s model lookup.
- Compatible Husqvarna commercial machines: check deck-mounted kit 598703001, including the deck-size exclusions.
- A ground-following roller: use Big League Lawns’ CheckMate selector for your exact mower and mounting arrangement.
Cub Cadet fabricated-deck kit: 19A70059OEM
This kit belongs on the shortlist for owners of specified Cub Cadet Ultima machines with fabricated 50-, 54- or 60-inch decks. Cub Cadet’s current 19A70059GFP page identifies that part as the replacement for 19A70059OEM and lists compatible 2019-onward Ultima applications. It also identifies specified Troy-Bilt Mustang Z50 and Z54 fabricated-deck applications.
The linked listing below identifies the older OEM part number. Check which part number the seller is actually supplying and confirm your full mower model before buying. “Ultima” and a matching cutting width alone do not resolve every revision.
MTD Genuine Parts 19A70059OEM Lawn Striping Kit, Fabricated 50/54/60-Inch Deck Applications, 1 Kit
As an Amazon Associate we earn from qualifying purchases.
Cub Cadet stamped-deck kit: 19A70060OEM
A stamped deck requires a different fit check. Cub Cadet lists 19A70060GFP for specified Ultima zero-turns with 42-, 50- and 54-inch stamped-steel decks from 2019 onward, and identifies it as replacing 19A70060OEM.
This is useful when two mowers have similar names or identical cutting widths but different deck construction. Compare the installed deck with the machine’s parts documentation, especially if a previous owner replaced it. The card refers to one 19A70060OEM kit, not the fabricated-deck version.
Ariens and Gravely rubber striper: 79206700
Ariens identifies 79206700 as a rear-mounted rubber striping kit for selected APEX, ZENITH, Gravely PRO-TURN and ZT HD applications. The kit includes a rubber striper, mounting brackets, hardware and instructions. Use the manufacturer’s model checker rather than treating a seller’s “48 inches and above” heading as universal fitment.
This option makes sense when the factory installation instructions cover your machine. Those instructions matter: mounting layouts and the treatment of the rubber skirt differ by application. Read the relevant section before trimming, drilling or lifting anything. A used kit missing its brackets may be an expensive saving once replacement hardware is sourced.
Husqvarna deck-mounted rubber flap: 598703001
Husqvarna’s product page identifies part 598703001 and UPC 193028081608. It describes compatibility with Z400 and Z500 models, excluding 72-inch cutting decks, and provides a specific model list.
Do not interpret an Amazon reference to “universal” commercial-platform fit as meaning every Husqvarna zero-turn. Confirm the current fit list for your machine, including any non-Z400/Z500 model shown separately by Husqvarna. The named part is a deck-mounted rubber-flap system, not a rear tow roller.
CheckMate: a mower-specific roller alternative
Big League Lawns’ CheckMate catalog organizes kits by mower model, with different mounting systems even among machines sharing a deck width. Its roller systems use solid rubber rollers and a floating mounting arrangement; there is no water or sand reservoir to fill.
Use the manufacturer’s size and fit process instead of assuming the roller should equal the deck width. Rear tire spacing contributes to the finished stripe, and an unnecessarily wide roller can overlap adjacent passes. Ask the manufacturer to resolve a model that is absent from the catalog before ordering. The exact kit is machine-dependent, so there is no single universal CheckMate Amazon card here.
What a striping kit actually does
Striping comes from grass leaning in opposing directions and reflecting light differently. A kit helps bend the cut grass; it does not paint the lawn or repair thin turf. Grass species, mowing height, density, sun angle and viewing direction affect the result. Expect variations rather than a guaranteed stadium pattern on every lawn.
A rubber flap and a roller both aim to lay grass over, but their mounting clearance and movement differ. A broad tow-behind lawn roller designed for other lawn work adds a separate implement behind the mower. It should not be chosen merely because a search result calls it a striping accessory.
Before fitting the kit
- Record the mower model and serial number, deck model where available, cutting width and whether the deck is stamped or fabricated.
- Read the kit’s installation manual and parts list. Check conflicts with a bagger, hitch, rear guard or other attachments.
- Check storage and transport clearance as well as mowing clearance. A striper can encounter curbs, trailer ramps and landscaping.
- Follow the mower and kit instructions for isolating power, supporting the machine and accessing the deck. Do not work beneath a machine supported only by a jack.
- Set up and inspect the attachment at the intended cutting height. Stop if hardware can contact moving parts.
Getting useful stripes without stressing the lawn
Start with an orderly route and room for smooth turns. Tight stationary pivots can damage turf; follow your mower’s operating guidance and the attachment’s turning restrictions. Inspect the kit after the first use for loose fasteners or unintended contact.
The University of Minnesota Extension recommends sharp mower blades and removing no more than one-third of the grass leaf at a mowing. Choose a height suitable for your grass and conditions rather than lowering the deck to chase stronger stripes. A healthy, evenly cut lawn is the foundation; the striping attachment supplies the finishing effect.
Image note: Existing category illustration retained from original article.
