Dimensional Measurement

47 Best micrometer stand 2022 – After 213 hours of research and testing.

Written by Toni Morrison

Now that you are here, you must be looking for the best micrometer stand! If you aren’t for it, you shall use our search and look for the topic you are interested in. As this piece is a lengthy one and covers a few more aspects other than the best list, they are the best micrometer stand brands in United States of America and a buyer’s guide for making an informed buying decision.

Before we begin with the list, We ask you to make a list of things that you are looking for in a micrometer stand. It could be anything which you’ll require when doing tasks. This will help you have some clarity about the important things and will help you save money by not overspending on the features you won’t use or a product that has more features!

You surely are here for being able to make an informed buying decision when it comes to micrometer stand and you must be looking for the list, We know that! But before we begin, we’d like to tell you that, this is the most unbiased list ever, it has specs, lists down the features of the micrometer stand, best brands and has a dedicated buyer’s guide for people in United States of America.

Full Disclosure: This article might have a few external links to Amazon and other informative sources. When you make a purchase on Amazon using our link, we’ll earn a small fee without you having to pay extra for the item. This helps us keep the site running and publishing more awesome content, add more research and never let people buy bad-quality products!

Best micrometer stand in 2021

1. QWORK Micrometer Stand with Double Non-Slip Clamping Pad for Micrometers Up to 4″ -Outside Micrometers


  • Multi-angle adjustable: Double fastening bolts can adjust the micrometer multiple angles, which is more convenient for measurement.
  • Suitable for: Use with micrometers up to 4″ to provide measurement stability.
  • High quality material: The main body is cast iron, and the fixture is equipped with rubber pads.
  • Size: The maximum opening distance of the fixture is 3/4 inch (18mm).
  • Anti-slip: There is a rubber pad on the surface of the fixture to avoid damage to the instrument, ensure the stability of the micrometer, and prevent the micrometer from scratching.

2. Mitutoyo 156-101-10 Micrometer Stand For Micrometers Up To 4″ -Outside Micrometers

By Mitutoyo

  • Product type:CUTTING TOOLS
  • package length : 29.0 cm
  • package height : 11.8 cm
  • Large easy to use clamp knobs
  • package width :29.4 cm

3. HFS (R) Precision Micrometer Holder Stand Base Inspection -Outside Micrometers


  • [APPLICATION]: It is mainly used for clamping 0-4 “micrometer to provide good measurement stability.
  • [SOFT RUBBER PAD]: There is rubber pad on the surface of the fixture, which can avoid damaging the instrument and play a good protective role in the process of clamping the instrument
  • [SIZE]: The maximum opening distance of the fixture is 18mm
  • [MATERIAL]: The main body is made of cast iron; The clamp is equipped with rubber pad.
  • [CONVENIENT ADJUSTMENT]: The fixture can be adjusted to any angle direction by knob, which can provide ideal measuring position and angle for inside and outside micrometers according to the use requirements

4. LLDSIMEX Precision Micrometer Holder Stand Base -Outside Micrometers


  • Product Dimensions: 7 x 4.7 x 5 inch
  • Made of Aluminum
  • Fits most inside and outside micrometers
  • Has rubber clamp keep mic doesn’t get damaged
  • 5/8” clamping; Fully adjustable micrometer clamp

5. Micrometer Stand Cast Iron Base Rubber Lined Jaws 4.75” wide x 6.5” long x 4.5″ High MS-1 -Outside Micrometers

By Taytools

  • Will allow benchtop use of standard micrometers or other small hand tools
  • Jaws rotate 50 degrees forward and 30 degrees back.
  • Overall height is 4.5”.
  • Cast iron base is a generous 4.75” wide x 6.5” long.
  • Rubber lines jaws will protect measuring tools, are 1.5” wide, will open to .75” and will accept most inside and outside micrometers.

6. HHIP 4401-0043 Μicrometer Stand -Outside Micrometers


  • Fully adjustable micrometer clamp.
  • Lacquered cast iron base.
  • Clamping capacity is 5/8″.
  • Non marring.
  • Flat frame style.

7. Oudtinx Precision Micrometer Holder Stand Base Inspection -Outside Micrometers

By Oudtinx

  • Rubber lines jaws will protect measuring tools
  • Fits most inside and outside micrometers,easy to operate, can be adjusted to any position
  • A heavy micrometer stand, smooth surface painting
  • Features convenient adjustments for optimum reading and part orientation.
  • Micrometer Holder Stand,made of cast iron, anti-slip chuck design

8. PANAVISE 391 Micrometer Stand -Outside Micrometers

By Panavise

  • Base accepts all 300 series vise Heads
  • Throat depth: 0.95 (24.1mm), Base features 4.3125 (109.5mm) bolt circle countersunk for three 1/4 (6.3mm) flat-head screws (not included)
  • Single control knob and exclusive split-ball locks Head firmly in place
  • Delrin pads open 0.5-Inch (12.7mm) and close to zero for holding thin items

9. INSIZE 6301 Micrometer Stand -Outside Micrometers


  • Made in China
  • Jaw opening 787 inch
  • Package Dimensions : 6.69 L x 4.72 H x 4.61 W (inches)
  • Suitable for micrometers up to 4 inch

10. TEXALAN Precision Micrometer Holder Stand Base Inspection with Strong Heavy Steel Base for 0-4” Micrometers -Outside Micrometers


  • Clamp with Rubber pads for protect the instruments
  • Provide a desirable measuring position and angle for inside and outside micrometers with strong and heavy steel base
  • Can be adjusted to any position
  • Used for 0-4″ micrometers
  • All clamps made of die-casting aluminium

11. Anytime Tools 0-6″ Outside Micrometer Machinist Tool Set with Carbide Tips + 6 pc 5/16″ – 6″ Precision Telescopic T Bore Gauge Set + Micrometer Stand -Outside Micrometers

By Anytime Tools

  • 6 pc Bore Gages
  • 0-6″/0.0001 Micrometer Set: 6 Micrometers with measuring ranges: 0-1″,1-2″,2-3″,3-4″,4-5″,5-6″
  • Micrometer Stand
  • Premium Quality Professional Precision Measuring Tools

12. Dasqua 7111-1105 Micrometer Stand -Outside Micrometers

By Dasqua

  • Flat frame style
  • Non marring
  • Clamping capacity is 5/8″
  • Lacquered cast iron base
  • Fully adjustable micrometer clamp

13. Micrometer Stand, Micrometer Holder Stand Base for Laboratory -Outside Micrometers

By nomal

  • MATERIAL: Metal, product size:6.3″ L x 4.33″ W x4.72″ H
  • GREAT DESIGN: There are rubber clips to keep the Micrometer from being damaged
  • MULTI-ANGLE ADJUSTABLE: Double fastening bolts can adjust multiple angles of the micrometer, which can make the measurement more convenient
  • PACKAGE LIST: 1 Piece Micrometer Stand
  • THREE-POINT ANTI-SLIP MAT: Three-point soft plastic mat is used to ensure the stability of micrometer stand

14. Accusize Industrial Tools Micrometer Stand, S907-C153 -Outside Micrometers

By Accusize Industrial Tools

  • Micrometer stand, made of steel that can be adjusted to any position.
  • Folding design for portable use
  • Clamp can be adjusted and locked in any position.

15. Grizzly Industrial G5727 – Micrometer Stand -Outside Micrometers

By Grizzly Industrial

  • Package dimensions: 4.9″ x 7″ x 4.9″
  • Fits most inside and outside micrometers
  • Approximate weight: 1.65 lbs

16. Micrometer Stand, Micrometer Holder Stand Base with Double Non-Slip Clamping Pad for Micrometers Up to 4″ -Outside Micrometers


  • SUITABLE FOR: Use with micrometers up to 4″ to provide measurement stability.
  • MATERIAL: Metal, product size:6.3″ L x 4.33″ W x4.72″ H
  • PACKAGE LIST: 1 Piece Micrometer Stand
  • .MULTI-ANGLE ADJUSTABLE: Double fastening bolts can adjust multiple angles of the micrometer, which can make the measurement more convenient
  • HIGH QUALITY : The main body is cast iron, and the fixture is equipped with rubber pads.

17. Mitutoyo 103-907-40 Outside Micrometer Set with Standards, 0-6″ Range, 0.0001″ Resolution, 6 Pieces -Outside Micrometers

By Mitutoyo

  • Item Package Dimension: 15.0″ L x 10.4″ W x 7.8″ H
  • Item Package Weight: 10.78 lb
  • Carbide-Tipped contact points for durability.
  • Interchangeable anvils to perform close tolerance ID measurements.

18. Starrett 992529 S766AZ Electronic 6″ Caliper and 1″ Micrometer Set -Digital Calipers

By Starrett

  • Package quantity: each
  • Product Type: Calipers & micrometers
  • Brand: starrett
  • Number of items: 1
  • Qty/ea: 1

19. SanLiang Digital Electronic Micrometer Set Measuring Tool 0-1 Outside Premium Inch/Metric Precision Machinist Caliper with Case and Extra Battery (Basic 0-1″(0-25mm)) -Digital Calipers

By SanLiang

  • Press and hold (3 sec
  • High AccuracyAccuracy is +/- 0.00005″
  • or more) the in/mm key to convert between inch and metric.
  • Large LCD displayLarge display makes it easy to read.
  • The digital micrometer measures 0 to 1″ (0 to 25mm) with 0.00005″ (0.001mm) resolution.
  • Inch/Metric, Absolute/RelativeSwitch between Inch/Metric units and absolute/relative measuring modes
  • Ratchet stopIt helps provide uniform pressure for precise, repeatable measurements
  • Hard carbide tipThe Hard carbide tip makes the micrometer caliper more durable.

20. Setup Blocks Height Gauge Set, 15pcs Precision Aluminum Setup Bars for Router and Table Saw Accessories Woodworking Set Up, Bars Include Laser Engraved Size Markings -Tools & Home Improvement


  • Accurate gauge block set sizes: 1/16″, 3/32″, 1/8 “,5/32″ ,3/16″ ,7/32″ ,1/4″ ,5/16″ ,3/8″ ,7/16″, 15/32″, 1/2″, 23/32″, 3/4″, 1x2x3”
  • 15 pcs Blocks Solid Aluminum Construction Black Anodized to better protect router bits and saws.
  • Set up gauge blocks are all 3 inches long
  • Fitted case included, so it will be more tightly protected during transportation.
  • Combine bars to setup 100’s of measurements
  • Easy-to-read laser etched labels on each block
  • The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.
  • Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.

Related Posts :

21. Clockwise Tools DTGR-0055 Electronic Digital Dial Thickness Gauge 0-0.4 inch/10mm Measuring Tool -Digital Calipers

By Clockwise Tools

  • Measuring Range 0-0.4″/10mm; Resolution 0.0005″/0.01mm; Accuracy ±0.001″/0.03 mm
  • Extra Large LCD Screen: 1.6″ x 0.7″; Powered by 3V CR2032 battery; Auto Off after 5-7 mins; Good for measuring soft materials such as paper, leather, and film
  • Inch and Metric Reading Function
  • Designed with grip handle and thumb trigger; Handy and easy to use
  • DO NOT CONNECT WITH REGULAR USB CABLE; Professional Certificate Included
  • Featured RS232 Data transfer port, must connect with “Clockwise Tools DTCR-01” Cable to make data transfer to PC

22. Starrett 449AZ-3R Vernier Depth Gauge, Micrometer Type, 0-3″ Range, 0.001″ Graduation, 2.5″ Base, 3 Rods, +/-0.0001″ Accuracy -Digital Calipers

By Starrett

  • 3 Rods in Case
  • 0-3″ Range
  • 2 1/2″ Base
  • Includes adjustable blade-shaped measuring rods to cover the range
  • Measurement range of 0 up to 6″, and resolution of 0.001″
  • Vernier scale for precise measurements in fine units
  • .001″ Grad
  • Combination ratchet and speeder for precise measurements
  • Non-rotating, 1/64″ wide x 1/8″ long blade for measuring narrow recessions

23. Mitutoyo 293-342-30 Digimatic Outside Micrometer, 2-3″/50.8-76.2 mm, 0.00005″/0.001 mm with Standard Ratchet Stop -Digital Calipers

By Mitutoyo

  • Auto power ON/OFF function
  • Anti-slip finish for improved grip while take measuremnts
  • W/O SPC Output
  • Measurement data output function is available with a water-resistant connection cable

24. RCBS Competition Powder Measure-Pistol -Sports & Outdoors


  • Measures ball, flake and extruded smokeless powder (do not use with black powder)
  • Accurately meter, by volume, all types of smokeless powder – ball, flake or cylindrical (stick)
  • Material: cast iron and steel, polymer hopper
  • Measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision fit
  • Meters volumetric powder charges from .5 to 40 grains
  • Precision ground metering drum and honed main casting
  • DO NOT use with black powder

25. Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Stop, 0-1″ (0-25.4mm) Range, 0.00005″ (0.001mm) Resolution, +/-0.00005″ Accuracy, Meets IP65 Specifications -Digital Calipers

By Mitutoyo

  • Plastic components are oil-resistant and measuring faces are carbide-tipped for durability
  • Ratchet stop to help provide uniform pressure for precise, repeatable measurements
  • Ingress Protection certified IP65 for protection against dust and water
  • LCD screen displays in inches and metric units
  • Calibrated micrometer measures 0 to 1″ (0 to 25mm) with 0.00005″ (0.001mm) resolution and +/- 0.00005″ accuracy, for taking outside diameter measurements in harsh workshop conditions

26. Rockwell RK9034 JawStand XP Work Support Stand -Tools & Home Improvement

By Rockwell

  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material

27. HFS (R Granite Surface Check Comparator Stand Plate 6” x 6” x 2” Base, 10″ Column -Digital Calipers


  • It is wear-resistant and not easy to be damaged
  • [SIZE]: Weight: 9.95 lbs (roughly); Base size: 6”L x 6”W x 2”H; Flatness: 0.0005″; Column Length: 8″; Column Diameter: 0.934″
  • [APPLICATION]: It is commonly used for fixed detection instrument, and is suitable for electrician, carpenter, laboratory, chemical plant and other occasions
  • Free from burrs, pileups, rust and deterioration over time
  • [STRONG AND DURABLE]: Because of its special material, the base is stable and difficult to roll over in the process of use
  • [FINE TUNING DESIGN]: A fine-tuning screw structure is set on the column rod, and the tightness is accurately controlled by rotating the screw
  • [MATERIAL]: The base is made of granite

28. Mitutoyo 293-341-30 Digimatic Outside Micrometer, 1-2″/25.4-50.8 mm,0.00005″/0.001 mm with Standard Ratchet Stop -Outside Micrometers

By Mitutoyo

  • Has SPC data output
  • Anti-slip finish for improved grip while take measuremnts
  • Auto power ON/OFF function
  • Measurement data output function is available with a water-resistant connection cable

29. Mitutoyo 350-351-30 MHN1-1″MX Micrometer Head, 3/8″ Stem, 1″, 0.00005″/0.001 mm -Outside Micrometers

By Mitutoyo

  • Equipped With Digital display and output
  • With Ratchet Stop for constant force
  • A special holder is available to be used with Mitutoyo Micrometer Stand
  • Preset, inch/mm conversion

30. Mitutoyo 129-127 Depth Micrometer, 0 to 4″ Measuring Range, 0.001″ Resolution, 2.5″ Base, 4 Interchangeable Rods -Outside Micrometers

By Mitutoyo

  • Measurement range of 0 to 4″, and resolution of 0.001″
  • Vernier scale for precise measurements in fine units
  • Satin chrome finish on the body for readability and hardened steel base for durability and accuracy
  • Ratchet stop and measuring rod clamp for precise measurements
  • Includes interchangeable 0.157″ diameter measuring rods that can be adjusted in 1″ increments for flexibility

31. Fowler 52-646-300-0 Cylinder Dial Bore Gauge Kit with 6″ Range -Outside Micrometers

By Fowler

  • Spring loaded centralizing foot
  • Complete in shop-hardened case
  • Requires standards for setting nominal sizes (not supplied)
  • Carbide anvils
  • Insulated grip
  • Graduation: .0005 inch
  • Extended Range: This 2-6″ bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper; carbide-tipped anvil contact points provide extended wear and improved abrasion resistance
  • Note:- The smallest anvil is already installed and the largest is left empty (used for metric sets); The small slots at the top of the box are for the washers/spacers (washers are inside bag)
  • Self Centering: The easily adjustable bore gauge is self-centering for fast, accurate measurements
  • Set Includes: A bore gage with insulated grip, self-centering measuring head, an extension holder, spacers, and a fitted case
  • Accurate Measurements: This bore gage features a dial indicator with a graduations of 0.0005″ and a measuring depth of 9.5″

32. Accusize Industrial Tools 6 Pc Ultra-Precision Outside Micrometer Set Plus a Portable Micrometer Stand and a 6pc Telescoping Gauge Set, 0906-C153 -Outside Micrometers

By Accusize Industrial Tools

  • Includes 6pc Nickel finished Telescoping Gauge Set
  • Kit includes: An Ultra-Precision Outside Micrometer Set includes 0-1″, 1-2″, 2-3″ 3-4″, 4-5″ and 5-6″ Mic
  • Perfect for machinist inspection
  • Includes a Portable micrometer stand
  • All micrometers are carbide tipped

33. Starrett 3206 Outside Micrometer Stand -Outside Micrometers

By Starrett

  • Positive lock on the base
  • Useful as a handy bench vise or assembly fixture
  • Accommodates all Starrett 1/2-Inch (13mm) and 1-Inch (25mm) outside micrometers and 2, 2A 2-Inch, 210, 220, 483, 485, 569 micrometers
  • Ball joint construction allows head to be positioned as much as 30-Degree off perpendicular in any direction
  • Gripping surfaces are two nylon pads which are replaceable

34. Anytime Tools Dial Bore Gauge 0.7″-6″/0.0005″ Deep Engine Hole Cylinder Measurement Gage -Outside Micrometers

By Anytime Tools

  • Range 0.7″ to 6″ diameter, Measures bore to 10″ deep
  • Super Precision Deep Measuring Bore Gauge
  • Carbide tip on measuring plunger
  • Accuracy: 0.0005″ with Crisp Precision Graduations
  • Dial indicator contains jeweled bearings, ABS storage case included

35. Mitutoyo 293-831-30 Digimatic Micrometer, Range: 0-1″/0-25.4 mm -Outside Micrometers

By Mitutoyo

  • New Ratchet thimble models improve one-hand operability
  • Electromagnetic Absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings
  • Anti-slip finish for improved grip while take measurements
  • Anti-slip finish for improved grip while take measuremnts
  • Includes a Mitutoyo Certificate of Calibration and meets the ISO/IEC 17025

36. Digital Micrometer, Professional Inch/Metric Thickness Measuring Tools 0.00005″/0.001 mm Resolution Thickness Gauge, Protective Case with Extra Battery -Outside Micrometers


  • 0-1″ (0 to 25mm) digital micrometer with 0.001″ (0.001mm) resolution and +/- 0.0001″ accuracy
  • Hard protective case for protection
  • Large LCD display
  • 2 measuring modes : Inch / Metric
  • Ratchet stop for using flexible

37. Anytime Tools 0-6″ Premium Outside Micrometer Machinist Tool Set Round Frame 0.0001″ Precision Vernier Scale with Carbide Tips -Outside Micrometers

By Anytime Tools

  • Graduations: 0.0001″ Laser Etched Graduations will never fade!
  • Complete with calibration standards and wrenches
  • Super Hard Carbide Anvils
  • Ratchet Thimble handle for precise application of force
  • Fitted wood case included!
  • Includes 6 Premium Quality Micrometers with measuring ranges: 0-1″, 1-2″, 2-3″, 3-4″, 4-5″, 5-6″

38. Mitutoyo 103-260 Outside Micrometer, Baked-Enamel Finish, Ratchet Stop, 0-1″ Range, 0.0001″ Graduation, -0.0001″ Accuracy -Outside Micrometers

By Mitutoyo

  • Carbide measuring faces
  • Hammertone baked enamel finish
  • Ratchet stop
  • Clear graduations on satin chrome finish
  • Supplied in fitted plastic case

39. Mxmoonfree Digital Micrometer with Miocrometer Base Stand 0.001mm/0.00005″ | 0-25mm/1″ Thickness Gauge Large LCD Portable Electronic Micrometer Measuring Tools with Storage Case -Outside Micrometers

By Mxmoonfree

  • Come with 2 Pcs battery.
  • It is powered by CR2032 button battery which has a longer battery life
  • LCD LARGE DISPLAY – Large and high-transparent LCD display shows the measurements accurately even at sunlight and shows the measurements in INCH / MM.
  • PRECISE MEASUREMENT – 0-1″/0-25mm digital micrometer with 0.00005″/0.001mm resolution and ±0.0001″/±0.03mm accuracy
  • AUTO SHUT OFF – The thickness gauge has a power saving mode where it shuts down for 5 minutes of inactivity
  • DIGITAL MICROMETER WITH BASE – Accurate micrometer measuring tool for professionals and hobbyists alike, by machinists, hobbyists, woodworkers, DIY, automotive mechanics and for other applications, such as 3D printing, micro electronic components, micro materials, glass sheet, plastics manufacturing, cables, wire OD, car brake rotor, etc.
  • HIGH ACCURACY – Hard carbide tip measuring faces give improved grip and provide wear resistance to environmental conditions such as dirt, oil and water that can cause false readings.
  • Ratchet thimble for precise application of pressure on object.

40. Mitutoyo 129-109 Vernier Depth Gauge, Interchangeable Rods, Micrometer Type, 0-50mm Range, 0.001mm Graduation, +/-0.0027mm Accuracy, 63.5mm x 16mm Base, 2 Rods -Outside Micrometers

By Mitutoyo

  • Ratchet stop and measuring rod clamp for precise measurements
  • Measurement range for series of 0 up to 150mm, and resolution of 0.01mm
  • Includes interchangeable 4mm diameter measuring rods that can be adjusted in 25mm increments for flexibility
  • Satin chrome finish on the body for readability and hardened steel base for durability and accuracy
  • Vernier scale for precise measurements in fine units

Related Posts :

41. Accusize Industrial Tools 0-6 inch by 0.0001” Ultra-Precision Outside Micrometers with Carbide Tips 6 Pc Set, Eg00-0906 -Outside Micrometers

By Accusize Industrial Tools

  • 6 pc Ultra-Precision M-Type Outside Micrometer Set;
  • 2″ and larger furnished with standards
  • Mitutoyo style frame – solid casting frame.
  • Carbide tipped; With ratchet stop and locking lever.
  • Includes 6 micrometers with Measuring Ranges: 0 – 1”, 1 – 2”, 2 – 3”, 3 – 4”, 4 – 5”, and 5 – 6”, Vernier Graduations: 0.0001”, accurate to 0.0001”
  • Resolution: 0.0001″(inch); 0.01mm(metric)

42. Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4″ Range (Set of 4) -Outside Micrometers

By Fowler

  • Micrometer Set: With flat anvil/spindle for general purpose measuring; microfine graduations and carbide-tipped measuring faces; 0.0001″ graduation for precise readings
  • High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips; 0.256″ diameter, 0.00003″ flatness, and 0.00005″ parallelism on 0 to 1″ micrometer for accurate measurements
  • Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life; Heat insulated frames
  • Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches; 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle; Ratchet stop thimble applies constant measuring force for repeatability between users

43. Digital Caliper, DITRON 0-6″ Calipers Measuring Tool – Electronic Micrometer Caliper with Large LCD Screen, Stainless Steel, Auto-Off Feature, Inch/Fraction/Millimeter -Outside Micrometers

By Ditron

  • High Precision: Measuring Range: 0-6″/150mm, Resolution: 0.0005″/0.01mm, Accuracy: ±0.001″/0.02mm, Repeatability: ±0.0005″/0.01mm, Measuring system: linear capacitive measuring system, Display: LCD display.
  • They are ideal for machinery, engineers, woodworking and DIY enthusiasts.
  • Zero Calibration at any point when measuring, then you can start a new measurement.
  • The digital calipers are suitable for home DIY, woodworking, jewelry and other industries, and are widely used in household, industry, automobile and other fields
  • High ingress protection: High ingress protection from dust, splash, oil (do not use in water)
  • Fraction/Inch/Millimeter Conversion: One button Fraction/Inch/Millimeter quickly switch
  • Four Measuring Modes: Easily measure inside and outside diameter,thickness, depth and step with two sets of jaws and a probe.
  • Zero calibration at any point, Auto-Off, made of solid zinc alloy, durable and portable.
  • Easy to Use: Locking screw to ensure stability, knurled thumb wheel sliding smoothly and use for fine tuning, rolling easily and do not bind

44. “Mitutoyo 293-185-30 Quantumike, Micrometer, DIGIMATIC, 0-1″”, IP65.00005″”, NO SPC”, Black/Gray -Outside Micrometers

By Mitutoyo

  • A function lock helps prevent error.
  • A patented ratchet thimble mechanism helps ensure repeatability.
  • Faster measurement with 2mm per revolution instead of the standard 0.5mm.
  • Certificate of inspection provided.

45. Mitutoyo 543-792 Absolute LCD Digimatic Indicator ID-S, #4-48 UNF Thread, 0.375″ Stem Dia., Lug Back, 0-0.5″/0-12.7mm Range, 0.00005″/0.001mm Graduation, +/-0.00012″ Accuracy -Outside Micrometers

By Mitutoyo

  • Sealed housing Ingress Protection certified IP42 for dust and water protection, has a 0.375″ diameter stem, a steel ball contact point, and a flat or lug back
  • LCD converts between inch and metric units and is automatically set to zero at the current spindle location when powered on for measuring in either or both directions
  • SPC data output (requires RS-232 cable, not included)
  • Alarm indicates low battery, scale contaminations, and data composition errors
  • Electronic dial indicator has a choice of resolution and a 0.5″/12.7mm measuring range for measuring surface variations

46. PANAVISE 385 Micrometer Head -Outside Micrometers

By Panavise

  • Throat depth: 0.95-Inch (24.1mm), Height (shaft to top of jaws): 3.14 (79.8mm), Weight: 0.23 lbs
  • Delrin pads open 0.5-Inch (12.7mm) and close to zero for holding thin items
  • (0.1kg)
  • Hold a micrometer or small item exactly where YOU want it!
  • Compatible with all 300 series Bases

47. 2-4oz Plastic Squeeze Bottles with 1.5 inch Stainless Steel Applicators -Outside Micrometers

By Liberty Products

  • Soft LDPE Plastic Bottle
  • Can be used for a wide variety of applications
  • 1.5 ” 18 Gauge Stainless Steel Applicator

Micrometer stand – The Buyer’s Guide

You must have checked the above list, aren’t you mind-blown by the quality of products? Well, if you are then here’s a secret formula which we’ve used to choose them. You can use them too! The best part is, it works for all the product purchases you make! Besides, wouldn’t it be helpful to you, if you knew the factors we’ve considered to choose the micrometer stand in the above list? So shall we begin with the guide and help you learn about the important factors?

1. Does it have the features you need?

Wait for a minute before you buy the micrometer stand, check if it has all the features in your requirement list! If it doesn’t have them, then you should avoid buying that particular model and start looking for an alternative. We always suggest our editors to make a list of important features before adding a product to a list and based on the feature, the quality of the product, brand-assurance, rank it! So if it has all you need, you should not mind paying a bit extra. However, if you end up buying the best micrometer stand which doesn’t have the feature you need the most, then it won’t make sense! Would it? To us, it wouldn’t! That’s why you should make up a list which includes the features you are looking for, technical specifications if any, etc and come up with a budget.

2. Budget and Price Match

Well, you obviously can’t buy the best micrometer stand with a low budget. That’s why it’s important to make note of all the important features, specs, factors and come up with a budget. Once you are ready with it, look for the products which are either equal to your budget or are close to it. Stick to the budget, because while browsing, you’ll see a model which is slightly better and has an additional feature with a really small price difference. Well, in that case you’ll have to calculate the price of the product which has all the required features and the micrometer stand with the additional features. See if the difference in amount is worth for the feature? If you don’t have second thoughts, you shall probably increase your budget.

3. Warranty and Brand

Most of the micrometer stand industry experts we got in touch suggested us to always buy the one which comes from a reputable brand. They also explicitly asked us to include the best brands so that users don’t buy the models from unknown brands or non-reputable companies. Because micrometer stand from an unknown brand might be cheap at first glance, but could have high-maintenance and could cost a lot in repairs.

Another benefit of buying a micrometer stand from a reputable brand would be warranty. Most of the micrometer stand from reputable brands come with good warranty. However, cheap products do come with a warranty, but claiming it can be a herculean task. That’s why buy the models which come from known brands and have good warranty.

4. Check for Reviews and Ratings

Back then when the Internet wasn’t as big as it is today, local stores charged high and even ended up selling the products which sucked or wasn’t future proof. It’s because the salesman threw technical terms and confused the buyer. But nowadays, there are sites like ours which does all the research and lists down the best models and there are eCommerce stores like Amazon which has user reviews which can be read to know the experience of the user with that particular micrometer stand. Isn’t it great?

The Verdict

We hope that you loved the micrometer stand we’ve listed in our best list. If it has been helpful, please bookmark our website and share it with people you know whenever they plan to buy something.

To wrap up this guide,

About the author

Toni Morrison

Toni is the Senior Writer at Main Street Mobile. She loves to write about the Internet and startups. She loves to read stories of startups and share it with the audience. She is basically a Tech Entrepreneur from Orlando. Previously, She was a philosophy professor. To get in touch with Matt for news reports you can email him on toni@mainstreetmobile.org or reach her out on social media links given below.

Leave a Comment