Penn State Car Decals: Two Licensed Options and a Fit Guide

Generic blank oval decal near the lower corner of a parked car window.
Written by Toni Morrison

Compare Penn State car decals from WinCraft and FANMATS, including verified models, size caveats, surface compatibility and careful application.

A good Penn State car decal should have the right Nittany Lions artwork, enough contrast to show up on your vehicle, and an adhesive intended for the surface you plan to use. For a simple white mark on dark glass, start with the WinCraft 4 x 4 Perfect Cut White Decal. For several smaller team-colored stickers, consider the FANMATS Penn State three-pack. The most useful choice depends on placement and size rather than how many decals come in the package.

This guide compares manufacturer information and identifiable product listings. It does not claim road testing, a measured service life, or a universal guarantee that an adhesive will remove cleanly from every vehicle finish.

Penn State car decals worth comparing

Option Useful for Check before ordering
WinCraft Perfect Cut White, 4 x 4 format A clean white design against dark glass or paint White version, correct logo and actual cut-out dimensions
FANMATS Penn State three-pack, model 61052 Several small placements or sharing a pack Individual sticker sizes; sheet measurements describe the whole pack
A removable magnet or static cling Occasional game-day display Surface compatibility and an explicit statement that it is removable

WinCraft Penn State Perfect Cut White Decal

WinCraft’s manufacturer listing for item 05909117 identifies an officially licensed Penn State decal in the 4 x 4-inch format, made in the USA from outdoor-rated vinyl. The matching Amazon listing is ASIN B074ZJHZ2T, with UPC 032085059093. Look for “Perfect Cut White” in the product name; a general “team color” field is less specific.

This is the sensible starting point if you want one restrained Penn State mark. White should be easier to distinguish against a dark background than a dark-blue design, although glass reflections, tint and nearby objects all affect visibility. Hold a paper template in the proposed position before peeling anything.

The main limitation is scale. A 4 x 4 format is compact, and the cut-out artwork need not fill every part of that square. It suits a small accent better than a large rear-window statement. Also check the package’s application method: a transfer-film decal needs different handling from a single peel-and-stick sticker.

FANMATS Penn State three-pack

The Penn State version of this FANMATS pack is model 61052, UPC 681620252545, and Amazon ASIN B01DP0KGOQ. The listing identifies three adhesive vinyl decals and Penn State graphics. FANMATS’ product catalog describes its Team 3-Pack Decal range as die-cut vinyl with UV-resistant construction, on an approximately 5 x 6.25-inch format.

Choose the pack when you want small graphics on more than one item: one on the car, another on a hard-sided cooler, and one kept as a spare. Before buying, inspect the product photo to decide whether you actually want each design. A three-pack offers little advantage if only one sticker fits your intended location.

There is a measurement caveat. The Amazon listing contains inconsistent overall dimensions, including older 5 x 7.5-inch copy. Treat sheet measurements as packaging guidance, not a promise that each decal is that large. If you need an exact-width logo, ask the seller for the dimensions of that individual sticker.

Choose the surface before choosing the design

A decal for glass, an adhesive emblem for a body panel and a reusable magnet are different products. Decide how long you want the display to stay in place, then read the specific package for permitted surfaces. “Outdoor vinyl” describes the material’s intended exposure; it does not establish compatibility with every coating.

  • Glass: choose a location that leaves your view clear and avoids wiper travel, cameras and sensors. Confirm whether the adhesive goes on the inside or outside.
  • Painted bodywork: be more cautious with peeling clearcoat, repaired areas, fresh paint or an unknown finish. Ask the vehicle or refinishing specialist about compatibility before applying adhesive.
  • Wraps and protective film: check with the installer. Do not assume an adhesive approved for bare paint is suitable for the film.
  • Textured trim: a smooth-surface decal may bridge the texture rather than bond evenly. Use a different location unless the decal specifically permits that material.

For temporary display, a magnet can be convenient on a compatible steel panel, but it will not attach to glass or many non-steel body panels. A static cling needs the smooth surface specified by its manufacturer. Neither format should be substituted for an adhesive decal without checking how it attaches.

Size and logo checks that prevent disappointing purchases

Measure the flat, unobstructed space available, then compare that with the actual artwork. Allow room around the edges so the graphic does not run into a trim seam or the edge of a window. Tape up a same-size paper rectangle and look at it from normal viewing distance. This inexpensive check is more useful than judging scale from a tightly cropped online image.

Verify the school name as well as the colors. Penn State Nittany Lions merchandise is different from University of Pennsylvania gear, Pittsburgh Panthers graphics or a generic Pennsylvania outline. Check the selected variant, not just the search-result picture. A listing with several college options can change the team when you select a size or color.

Apply carefully and plan for eventual removal

  1. Read the instructions before separating the backing. Identify whether a transfer layer must remain over the design during application.
  2. Clean the chosen surface using a method compatible with both the decal and the vehicle. Let it dry fully; do not apply over loose dirt, wax residue or failing paint.
  3. Position the decal before exposing the adhesive. Use a small alignment guide so you do not have to repeatedly lift and reposition it.
  4. Apply using the package’s recommended technique. Avoid improvising with heat, strong solvent or a sharp tool.
  5. Follow any waiting period specified before washing the vehicle. Check the edges afterward and stop directing pressure at an edge that starts to lift.

Removal instructions deserve a read before installation. Do not rely on a generic online “no residue” promise, especially for older paint, tinted film or a wrapped vehicle. If the finish is valuable or its condition is uncertain, professional removal may be the better choice. Avoid using a metal blade on paint or coated glass.

Which Penn State decal should you choose?

Pick the WinCraft white Perfect Cut if a single compact mark will do the job and the background gives white artwork good contrast. Pick the FANMATS three-pack when smaller team-colored graphics and several placements are more useful. For seasonal use, compare a clearly labeled removable format instead. In every case, getting the team, surface and individual dimensions right matters more than a long list of loosely related “best” products.

Image note: Original AI-generated editorial illustration; generic objects shown, not branded product photography.

About the author

Toni Morrison

Toni is the Senior Writer at Main Street Mobile. She loves to write about the Internet and startups. She loves to read stories of startups and share it with the audience. She is basically a Tech Entrepreneur from Orlando. Previously, She was a philosophy professor. To get in touch with Matt for news reports you can email him on toni@mainstreetmobile.org or reach her out on social media links given below.