Now that you are here, you must be looking for the best hose splicer! If you aren’t for it, you shall use our search and look for the topic you are interested in. As this piece is a lengthy one and covers a few more aspects other than the best list, they are the best hose splicer brands in United States of America and a buyer’s guide for making an informed buying decision.
Before we begin with the list, We ask you to make a list of things that you are looking for in a hose splicer. It could be anything which you’ll require when doing tasks. This will help you have some clarity about the important things and will help you save money by not overspending on the features you won’t use or a product that has more features!
You surely are here for being able to make an informed buying decision when it comes to hose splicer and you must be looking for the list, We know that! But before we begin, we’d like to tell you that, this is the most unbiased list ever, it has specs, lists down the features of the hose splicer, best brands and has a dedicated buyer’s guide for people in United States of America.
Full Disclosure: This article might have a few external links to Amazon and other informative sources. When you make a purchase on Amazon using our link, we’ll earn a small fee without you having to pay extra for the item. This helps us keep the site running and publishing more awesome content, add more research and never let people buy bad-quality products!
Best hose splicer in 2021
1. 4 Sets 5/8 Inch Solid Brass Garden Hose Mender End Repair Kit Water Hose Coupling Splicer Mender Female Male Hose Connector with Tape, Stainless Steel Clamp and 3/4 Inch Rubber Gasket -Patio, Lawn & Garden
By Hotop
More Pictures- 18 mm/ 0.7 inches in diameter and the hose repair connector is 16.4 mm/0.64 inch in diameter, supports for 5/8 inch standard hose, it’s easy to insert and remove, convenient to use; Please confirm whether the size meets your need before purchasing
- Applicable usages: our female male hose connectors are nice repairing tools for water faucet, sprayer, garden hose and more as long as the size is fitting, our garden hose mender tools will be considerate assistants for repairing your torn or broken pipe
- Check the size: every solid brass garden hose connector measures approx
- What’s included: you will obtain 4 sets 5/8 inch brass garden hose menders, 8 pieces stainless steel clamps, 8 pieces rubber gaskets and 1 roll tape in a package, enough to satisfy your use and replacements,
- Simple to assemble: there is no complex process, you can directly install these end repair kits by hands, the stainless steel clamp with hose mender is sturdy and good for protect the pipe from leaking
- Reliable material: the coupling splicer menders are made of solid brass which is rustproof and stable to use, the clamp is made of stainless steel, with firm and well-made structure, not easy to break, can serve your long-term using
2. LTWFITTING Brass Barb Hose Splicer Mender 1/8-Inch Fitting Air Water Fuel Boat(Pack of 10) -Parts & Connectors
By LTWFITTING
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
- Net Weigh : 2.5 g/pc
- Type: Barb Hose Splicer / Mender
- Hose ID: 1/8″
- Materies: BRASS
3. Quickun Plastic Hose Barb Fitting, 3/8″ x 3/8″ Barbed Splicer Mender Joint Adapter Union Fitting (Pack of 5) -Parts & Connectors
By Quickun
- Can be easily connected with tubing hose line.
- 100% new and high quality material.
- Wide range of use: Suitable for applications in pharmaceutical,fooand beverage,laboratory,chemical processing and handing,and printing and labeling.
- Smooth surface and inner wall, durable Light and Small
- Can be connected with 3/8″ Hose ID.
- Exquisite craftsman makes it safe and reliable.
4. Melnor Hose Mender,Black, Fits 5/8″ or 3/4″ Hoses – 02MC -Parts & Connectors
By Melnor
- Rust-free, Poly construction
- Fits 5/8 inch or 3/4 inch (9.5 mm or 12.5 mm) hoses
- Easy assembly and leakproof operation
- Melnor’s limited 2-year warranty
- Attaches using Philips Screwdriver
5. Twinkle Star Garden Hose Splitter 2 Way, Y Connector Brass Garden Hose Adapter -Parts & Connectors
By Twinkle Star
- Easy to connect with hose, very firm, leak-free.
- Material: Made of premium brass, very solid and durable for long use.
- Universal: This 3/4″ hose splitter fits for all standard faucet and garden hose.
- 2 way Y hose splitter with 3 connectors and 2 valve.
- Adjustable Flow Control: With large plastic handle for easy grip, easy to turn on and off.
6. TL TOOLEGIN Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits, 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ 5/8″ Barbed x Barbed 6pcs -Parts & Connectors
By TL TOOLEGIN
- NOT FOR POTABLE WATER
- CA360 Brass fittings,CA377 Brass for forged fittings.Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Contains:3/16″ x 3/16″ Barb-1pc; 1/4″ x 1/4″ Barb-1pc; 5/16″ x 5/16″ Barb-1pc; 3/8″ x 3/8″ Barb-1pc; 1/2″ x 1/2″ Barb-1pc; 5/8″ x 5/8″ Barb-1pc(6pcs) .
- Temperature control circuits,pneumatic circuits,cacuum and fluid systems test apparatus,lubricant,coolantlines, Temperature range of -40°F to 160°F (-53°C to 121°C)
- For use with LP and natural gas, refrigeration, and hydraulic applications
- NOT DEEMED LEAD FREE
7. Da by 3 pcs 3/8″(10mm) Barb Splicer Mender Hose Brass Barb Fitting with 6 pcs Stainless Steel Pipe Clamps for Water/Fuel/Air -Parts & Connectors
By Da by
- Heavy straight type brass barb splicer menders and thickened wall, higher strength.
- Stainless steel for corrosion resistance and will not rust, super sturdy.
- Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Pipe clamps all components are all made of 304 stainless steel and will not rust.
- Material: Hose barb splicer mender made of brass
- Solid Connections:The hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose.
- Packaging Includes：3 Brass Hose Mender with barb 3/8″ x 3/8″(10mm), 6 Stainless steel pipe clamps fit hose outer diameter of 13-19 mm.
8. Metabo HPT Poly Air Hose Repair Splicers Kit, 1/4″, Brass, (115313M) -Tools & Home Improvement
By Metabo HPT
- Hitachi power tools has renamed to Metabo HPT
- Same tools
- Premium Metabo HPT accessory
- New name
- 1/4-inch poly air hose splicer repair kit
9. cozyou 5 Pack 5/8 Inch Aluminum Hose Connectors Garden Water Hose Repair Mender with Clamps -Parts & Connectors
By cozyou
- With barbed to stuck and seal the hose
- Fits any standard 5/8-inch standard garden hose
- Easy to use, garden hose connect and repair
- Include 5 pcs hose mender, 10 pcs stainless clamps
- Great for repairing damaged or torn water hoses
10. 4 Sets 5/8 Aluminium Garden Hose Repair Mender Kit with Hose Clamps, Splicer Mender Water Hose End Mender Female and Male Hose Connector with Stainless Steel Clamp -Patio, Lawn & Garden
By Hotop
- What you get: package includes 2 sets of garden hose repair mender, 2 sets of splicer mender and 8 pieces stainless steel clamp, sufficient quantity for you to replace in daily life
- Wide use: the garden hose repair mender kit are easy to install by hands and can effectively avoid leakage, suitable for using with water faucet, sprayers, garden hose and so on as long as the size matches, if you have a torn or damaged water hose that needs repairing, this metal garden hose mender is just what you need
- Garden hose repair mender: our garden hose mender is about 15.6 mm/ 0.61 inch in diameter, which work finely with 5/8 inch standard garden hose, each set of garden hose mender consists of female and male connectors, can easily connects to a garden water hose and stays tightly in place with stainless steel clamps, nice for repairing damaged or torn water hoses
- Splicer mender: this splicer mender has 2 openings for connecting 5/8 inch hose, it connects 2 hoses with the same diameter in a straight run and creates a tight seal on the hose when applied with a hose clamp, easy to install and practical to use
- Material: the hose mender and splicer mender are made of aluminium material, the tightening clamp is made of stainless steel material, sturdy, rust-proof and corrosion resistant, you can easily extend the life of your standard garden hose with them
11. Pronese 2 Pack Soild Brass HPT Air Reusable Hose Splicer Repair Kit,Air Hose Fitting for 3/8-Inch ID Hose -Tools & Home Improvement
By Pronese
- Package Include: 2Pack 3/8 inch x 3/8 inch Hose Splicer.Comes with 1 year warranty.
- Material: Solid Brass construction
- Applications: Durable design means our fittings can be used in any environment, from home garages to professional auto shops.
- Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Introduction: With these fittings, hoses can be customized to any length, allowing your jobsite needs to be met.
- SIZE: Barb Size–3/8 inch x 3/8 inch,Maximum pressure rating of 300 psi,Temperature range of -40 to +250 degrees F.
12. Uenhoy 4 Pcs Brass Hose Barb Reducer, 3/8″ to 1/4″ Reducing Barb Adapter Splicer Barb Fitting for Fuel Air Water Oil Gas WOG, with Hose Clamps -Fittings
By Uenhoy
- It is suitable for hose which inner diameter of 10mm and 6mm, 3/8″ barb to 1/4″ barb.
- Please feel free to contact us if the item has any quality problem
- Function — The barb hose splicer reducer is used for connecting a hose to another hose in different diameter
- Also can be used to conect lines for air, water, gas, fuel, oil in a quick and simple way.
- Your satisfaction is our biggest power.
- Premium Material — The barb hose reducer is made of brass material, corrosion resistant, wear resistant, with low magnetic permeability and good ductility at high temperatures.
- They can protect the hose from damage by extrusion, also can form a tight seal on the semi-rigid or flexible hose.
- Hose Clamps — Package includes 8 pcs hose clamps which are made of stainless steel, has corrosion resistance, not easy to bend
- Satisfactory After-Sales Service — Uenhoy is devoted to providing high quality service
- Widely Application — The barb reducer fittings can be used in patio, lawn, garden for hose connecting and irrigation
13. Primefit HF14PU14PU-B10-P (10-Pack) 1/4″ Poly Hose Splicer -Tools & Home Improvement
By Primefit
- Use to join or repair 2 sections of 1/4″ polyurethane air hose
- No crimping necessary
- Solid brass construction
- Simple and easy to use
- (10 PACK) – 1/4″ Polyurethane Air Hose Splicers
14. JoyTube Brass Hose Barb Fitting Metals Splicer Mender, 1/4″ Barb Hose Union Fuel Gas Water Air (Pack of 12) -Fittings
By JoyTube
- Union coupling for connecting two hoses with the same diameter in a straight run.
- Connections: 1/4” to 1/4”
- Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) .
- Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart
- The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include).
- Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Our barb union will provide good seal when you use it to connect hose.
- Connects to a hose on both ends
15. 8 PCS 3/8″ ID Brass Barb Splicer Fitting ATITOWEL 10mm T-Shaped 3 Ways Brass Hose Splicer Fitting For Air Water Gas Fuel Oil Inert Gases -Fittings
By ATITOWEL
- APPLICATION: Hose Barb fitting used to connect lines for air, water, gas,fuel, oil and inert gases in a quick and simple way.use with plastic or rubber hose
- We would offer you full refund or resend without return to let you buy with confidence.If you have any problem,we will reply within 24 hours.
- FEATURE:Barb Size-10mm or 3/8″ ; Barb Length-0.63-inch ; Barbed barb hose fitting has three openings for connecting 3/8″ ID hoses
- MATERIAL: Brass Brass Barb Splicer Fitting made of brass, Brass has corrosion resistance, ductility at high temperatures, and low magnetic permeability,Temperatures range from -40 to 160 F
- ADVANTAGE:The brass Barb union coupling for connecting three hoses with the same diameter.Barbed fitting creates a tight seal on flexible and semi-rigid hose
16. LTWFITTING Brass Barb Splicer Mender 3/4-Inch ID Hose Fitting Air Boat Fuel Hose Joiner(Pack of 5) -Fittings
By LTWFITTING
- Hose ID: 3/4″
- Materies: BRASS
- Type: Barb Hose Splicer / Mender
- Net Weight : 49 g/pc
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
17. LTWFITTING Brass Barb Splicer Mender 1/4-Inch Hose ID Fitting Air Water Fuel Hose Joiner(Pack of 10) -Fittings
By LTWFITTING
- Net Weight : 7.5 g/pc
- Materies: BRASS
- Hose ID: 1/4″
- Type: Barb Hose Splicer / Mender
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
18. LTWFITTING Brass Barb Splicer Mender 3/8-Inch ID Hose Fitting Air Water Fuel Boat(Pack of 25) -Fittings
By LTWFITTING
- Type: Barb Hose Splicer / Mender
- Hose ID: 3/8″
- Materies: BRASS
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
- Net Weight : 15 g/pc
19. Metaland Plastic 1/2″ Hose Barb Splicer Mender Euqal Barbed Coupler Round Union Adapter (Pack of 6) -Fittings
By Metaland
- Lead free, durable, safety for potable drinking.
- √ApplicationSuitable for pharmaceutical,fooand beverage,laboratory,chemical processing and handing,and printing and labeling.
- √Size1/2″ Hose Barb, suitable for 1/2″ ID hoses or tubings.
- √Material100% PP polypropylene plastic, better then PVDF
- √QuantityPackage including 6PCS plastic barbed fittings.
- √Working Temperature&PressureTemperature range from -120 to +280 degrees F, Maximum working pressure of 150 psi.
20. ANPTGHT 1/4″ to 3/16″ Hose Barb Reducer Pipe Fittings Adapter, Plastic Joint connector Splicer Mender for Aquarium Household Transport Fuel Gas Liquid Air (Pack of 4) -Fittings
By ANPTGHT
- Applicability It can withstand 125 psi (70°F) pressure and temperatures from -9°F to 175°F, but it is not resistant to oil
- UseSuitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and handing, and printing and labeling.
- Product Smooth surface and inner wall, lightweight and durable
- ConnectionCan be connected with 1/4″ Hose ID x 3/16″ Hose ID.
- Material Plastic barb connector, made of high-quality PP（Polypropylene） material
21. Metaland Brass 1/2″ Hose Barb Splicer Mender Euqal Barbed Coupler Round Union Adapter (Pack of 2) -Barbed Fittings
By Metaland
- √MaterialMade of solid brass, high quality, can work in high temperatures and pressure.
- √QuantityPackage including 2PCS barbed fittings and 4PCS hose clamps.
- √Size1/2″ Hose Barb, suitable for 1/2″ ID hoses or tubings.
- Barbed retracting locks for easy slide-back connecting and disconnecting.
- √Working Temperature&PressureTemperature range from -200 to +500 degrees F, Maximum working pressure of 300 psi.
- √ConnetionHose Barb on both ends that can connect with two hoses or tubings in same inner diameter
22. Joywayus 3/8″ to 1/2″ Reducer ID Hose Barb Splicer, Hex Union Fitting Intersection/Split Brass Water/Fuel/Air -Barbed Fittings
By Joywayus
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Material: Brass
- Adapter for connecting a hose to a hose threaded connection of a different diameter
- Connections: 1/2″ x 3/8″
- Connections: Hose Barb x Hose Barb
- Temperatures range from -40 to 160 F
23. Horiznext Brass Hose Splicer Fitting Tee, 5/8″ x 5/8″ x 5/8″ inch Hose ID Barbed -Barbed Fittings
By Horiznext
- Tee for connecting and branching three hoses
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A
- Fitting connects to hose on all ends
- Intended for use with hose clamp or crimp type ferrule (sold separately)
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- and its territories.
24. Legines 2pcs Barb Union 3/8″ Barbed x 3/8″ Barbed Splicer Brass Hose Fitting Mender Joiner -Barbed Fittings
By Legines
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Union coupling for connecting two hoses with the same diameter in a straight run
- and its territories.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A
- Barbed fitting for a tight seal on hoses
- Connects to a hose on both ends
25. TAILONZ PNEUMATIC Union 3/8″ Barbed x 3/8″ Barbed Splicer Brass Hose Fitting Mender Joiner（Pack of 10） -Barbed Fittings
- MaterialBrass
- Product NameTwo-Ways Brass Hose Fitting
- Size3/8‘’ Barb
- Maximum Pressure150PsiWorking Temperature-40～160°F
- Typical Applicationtemperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines.
26. ZKZX 2Sets 5/8 Inch Aluminium Garden Hose Mender End Repair Kit,2Pcs 5/8 Barb Splicer Mender,Water Hose End Mender with Stainless Steel Clamp,Female and Male Hose Connector (2Sets with 2Splicers) -Patio, Lawn & Garden
By ZKZX
- Standard 3/4″ US thread garden hose connection, work with your gaden hose, sprayers, nozzle, etc.
- It can be use garden hose mender, end hoses male mender, end hoses female mender,hose repair mender.
- Pipe joint diameter is 16-16.5mm, Standard 5/8″ is about 16.5-17mm,Our product is a little smaller than stand size which make it easy to insert or pull out 5/8” hose.with the stainless tightening clamp you can make it tightly as you want.
- 2 Male Mender + 2 Female Mender + 2 Barb Splicer Mender+ 8pcs stainless tightening clamp fit for 14-27mm out diameter hose.stainless clamp width is 12mm.with the stainless tightening clamp you can make it tightly as you
- Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free, Absolutely can be installed for potable water use.
27. Technicians Choice OPK19 Heater Hose Splicer Assortment (18 Piece) -Automotive
- OPK19 Heater Hose Splicer Assortment (18 piece)
28. Coilhose Pneumatics PHS0406 Flexeel Hose Reusable Hose Splicer For 1/4-Inch ID Hose -Barbed Fittings
- Fitting body and 2 nuts for splicing damaged hose
- Fits hose with 1/4″ ID and 3/8″ OD
- Brass for resistance to corrosion
- Maximum pressure rating of 300 psi
- Temperature range of -40 to +250 degrees F
29. Uenhoy 4 Pcs Brass Barbed Hose Fittings 3/8 Inch Barb Splicer Mender for Gas, Fuel, Oil, Air, Water, WOG -Barbed Fittings
By Uenhoy
- Widely Application — The barb splicer can be used in patio, lawn, garden for hose connecting and irrigation
- Premium Material — The barb hose fitting is made of brass material, corrosion resistant, wear resistant, with low magnetic permeability and good ductility at high temperatures.
- Also can be used in pneumatic circuits, temperature control circuits, vacuum and fluid systems, lubricant and coolant lines.
- Function — The barb hose splicer is used for connecting two hoses with the same diameter, which inner diameter is 3/8″ (10mm) for transporting gas, air, water, fuel, WOG.
- Satisfactory After-Sales Service — Uenhoy is devoted to providing high quality service
- Hose Clamps — Package includes 8 pcs hose clamps which are made of stainless steel, has corrosion resistance, not easy to bend
- Your satisfaction is our biggest power.
- They can protect the hose from damage by extrusion, also can form a tight seal on the semi-rigid or flexible hose.
- Please feel free to contact us if the item has any quality problem
30. Tnuocke 3pcs 3/16″ Brass Tee Barb Fittings,3 Way Union Intersection Fitting T Shape Barbed Splitter Fitting Splicer with Hose Clamps for Water Fuel Air H-058-3/16 -Barbed Fittings
By Tnuocke
- Stainless steel is corrosion resistant, strong and durable.
- Material: Solid brass has corrosion resistance
- Product Size:3/16″Barb x 3/16″Barb x 3/16″Barb,suitable for 3/16″ID hose tubing.Brass T barbed fitting with three openings for connecting and branching three pipes.
- Temperature and pressure:150Psi,Working Temperature：-40～160°F
- Package:3PCS 3/16″ Brass Tee Barb Fittings,9PCS hose clamps.
- Application: It can be used in water, oil, gas, fuel, pneumatic circuit and fluid testing equipment.
31. SADLDWBB Hose Repair Kit Hose Connectors with Clamps, Garden Hose Repair Kit Male and Female, Aluminum Garden Hose Connector Garden Hose Fittings for 3/4″ or 5/8″ Water Hose End Mender 3 Set -Patio, Lawn & Garden
By SADLDWBB
- Material: Made of premium aluminum, the surface oxidized to copper-like color.
- Clamps are made of 304 stainless steel.
- Good Service: With 3 years
- Widely use: Fit for 3/4″ or 5/8 hose fittings.
- Ackage include: 3 pc male + 3 pc female garden hose repair kit, 6 pc stainless tightening clamp,with 3 pc free rubber gaskets
- Widely use: Fit for 3/4″ or 5/8 hose fittings.
- Easy to use: easy to connect and disconnect, garden hose repair connector can be use to repair and connect the water hose end
32. TAISHER 2 Pieces Brass Hose Barb Reducer, 1/2 Inch to 1/2 Inch Barb Hose ID with 4 Hose Clamp, Brass Barb Reducer SPLICER Fitting -Barbed Fittings
By TAISHER
- Connection fasteners for water, oil, gas, hydraulic hose.
- [ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band
- [ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant
- [ FUNCTION ] Used to connect hoses of the same diameter,The hose barb can be solid connected to the hose ,The pipe clamps can create a tight seal on flexible or semi-rigid hose.
- The extended band liner to protect the hose from damage caused by extrusion
- [ Product Size ] 1/2″ Barb x 1/2″ Barb
- This pipe fitting can apply to water, air, gas, oil and fuel.
- [ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F.
33. Metaland Brass Hose Barb Reducer, 5/16″ to 3/16″ Hose ID, Reducing Barbed Hose Splicer Mender Coupler Warter Fuel Air (Pack of 2) -Barbed Fittings
By Metaland
- √QuantityPackage including 2PCS reducer barbed fittings and 4PCS hose clamps.
- √ConnetionHose Barb on both ends that can connect with two different ID hoses or tubings
- √Size5/16″ Hose Barb to 3/16″ Hose Barb.
- √MaterialMade of solid brass, high quality, can work in high temperatures and pressure.
- √Working Temperature&PressureTemperature range from -200 to +500 degrees F, Maximum working pressure of 300 psi.
- Barbed retracting locks for easy slide-back connecting and disconnecting.
34. EDGE INDUSTRIAL 3/4″ Hose ID Brass Hose Barb SPLICER Union Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 1) -Barbed Fittings
- Backed by EDGE Industrial full manufacturers warranty
- NOT FOR POTABLE WATER
- 3/4″ Hose ID Brass Barb Splicer Union Fitting
- -40° to 160° Temperature Rating
- 150 PSI maximum working pressure
- NOT DEEMED LEAD FREE
35. Flexzilla Pro Air Hose Reusable Splicer, 3/8 in. – RP901375 -Barbed Fittings
By Flexzilla
- USE WITH FLEXZILLA AIR HOSE – Works with corresponding Flexzilla and Flexzilla Pro Air Hoses, and allows for fully customizable hose lengths
- Our unique design allows for easy installation and an air-tight seal on any Flexzilla hose.
- EXTREMELY DURABLE – All fittings are made with anodized aircraft aluminum, making them crush resistant and durable for all environments, and the spiral bend restrictor provides increased hose flexibility.
- FOR ANY JOB – Durable design means our fittings can be used in any environment, from home garages to professional auto shops
- FIELD REPAIRABLE – Never worry about busted hoses again! In just a few easy steps, a Flexzilla hose can be repaired on the jobsite
- Need a smaller hose? With these fittings, hoses can be customized to any length, allowing your jobsite needs to be met
- BARB SIZE – 3/8 in
- Fit Type: Vehicle Specific
- x 3/8 in.
36. Taisher 5PCS 304 Stainless Steel Hose Barb Fittings 3/8 Inch to 3/8 Inch Barb Hose, Hose Barb Reducer Splicer Mender Union Air Water Fuel with 10PCS Hose Clamp -Barbed Fittings
By TAISHER
- [ PRODUCT SIZE ] 3/8″ Barb x 3/8″ Barb
- [ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band
- This pipe fitting can apply to water, air, gas, oil and fuel.
- [ FUNCTION ] Used to connect hoses of the same diameter,The hose barb can be solid connected to the hose ,The pipe clamps can create a tight seal on flexible or semi-rigid hose.
- [ OPERATING TEMPERATURES ] Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c.
- Connection fasteners for water, oil, gas, hydraulic hose.
- The extended band liner to protect the hose from damage caused by extrusion
- [ MATERIAL ] Hose Barb Splicer Mender Made of 304 stainless steel, strength，Has corrosion resistance, high temperature ductility and low permeability
37. GaoLing Brass Hose Barb Fitting, Mender/Splicer/Joiner/Union,Tubing Hose Adapter/Coupler, 3/8″ Barb x 3/8″ Barb(2 pcs) -Barbed Fittings
By GaoLing
- Temperature control circuits,pneumatic circuits, vacuum and fluid systemstest apparatus, lubricant, coolant lines,For Connects to a hose on both ends
- and its territories.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A
- Union coupling for connecting two hoses with the same diameter in a straight run
- Barbed fitting for a tight seal on hoses
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
38. Metabo HPT Air Hose Repair Kit, Brass Splicers, Steel Clamps, 3/8″ (115163M) -Tools & Home Improvement
By Metabo HPT
- Brass splicers, steel clamps
- Hitachi power tools has renamed to Metabo HPT
- Same tools
- 3/8-inch air hose repair kit
- New name
39. uxcell 10mm or 3/8″ ID Brass Barb Splicer Fitting,T-Shaped 3 Ways,Barb Hose Fitting Air Gas Water Fuel,Barbed Tee Connector,2pcs -Tools & Home Improvement
By uxcell
- ►APPLICATION- Hose Barb fitting used to connect lines for air, water, gas,fuel, oil and inert gases in a quick and simple way.use with plastic or rubber hose
- ►UNIVERSAL DESIGN- Barb Size: 10mm or 3/8″ ; Barb Length: 0.63-inch ; Barbed barb hose fitting has three openings for connecting 3/8″ ID hoses
- ►BRASS BARB FITTING- The brass Barb union coupling for connecting three hoses with the same diameter
- ► MATERIAL- Brass Brass Barb Splicer Fitting made of brass, Brass has corrosion resistance, ductility at high temperatures, and low magnetic permeability,etc
- ►ADVANTAGE- Barbed fitting creates a tight seal on flexible and semi-rigid hose
40. Metalwork Brass Hose Barb Fitting, 6mm Barb x 4mm Barb Reducing Splicer Mender Union, Air Water Fuel Hose Reducer Joiner (Pack of 2) -Barbed Fittings
By Metalwork
- The more your purchase the best price you get.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Reducing union coupling for connecting two hoses with the differrent diameter in a straight run
- Barbed fitting for a tight seal on hoses
- Connects to a hose on both ends
41. 1/16″ Hose ID, Hose Barb Mender/Splicer/Joiner/Union Fitting Nickel Plated Brass Single Barb -Barbed Fittings
By MettleAir
- Air / Vacuum
42. Joywayus 3/8″ to 1/2″ Barb Fitting Reducer Hose Barb Splicer Hex Union Brass Fitting Water/Fuel/Air (Pack of 2) -Barbed Fittings
By Joywayus
- Material: Brass,Package:2 Pack.
- Connections: Hose Barb x Hose Barb.
- Temperatures range from -40 to 160 F.
- Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
- Adapter for connecting a hose ID 3/8″(10mm) to a hose 1/2″ (13mm ) connection.
43. Quickun Brass Hose Barb Reducer 1″ to 5/8″ Barbed Reducer Fitting Reducing Splicer Mender Union Adapter for Air Water Fuel -Barbed Fittings
By Quickun
- Connections size: 1″ x 5/8″
- NOT FOR POTABLE WATER
- Contains no lead
- Temperatures range from -40 to 160 F
- Material: Brass
- Type : Barb Hose Mender/Splicer Reducer
- 150 PSI maximum working pressure
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Adapter for connecting a hose to a hose threaded connection of a different diameter
44. Quickun Hose Bard Fitting, 5/8″ x 5/8″ Hose ID Brass Hex Barbed Splicer Mender Joint Adapter Union Fitting (Pack of 2) -Barbed Fittings
By Quickun
- and its territories.
- Hose ID: 5/8″
- Adapter for connecting a hose to a hose connection
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A
- Temperatures range from -40 to 160 F
- Type: Barb Hose Splicer / Mender
Hose splicer – The Buyer’s Guide
You must have checked the above list, aren’t you mind-blown by the quality of products? Well, if you are then here’s a secret formula which we’ve used to choose them. You can use them too! The best part is, it works for all the product purchases you make! Besides, wouldn’t it be helpful to you, if you knew the factors we’ve considered to choose the hose splicer in the above list? So shall we begin with the guide and help you learn about the important factors?
1. Does it have the features you need?
Wait for a minute before you buy the hose splicer, check if it has all the features in your requirement list! If it doesn’t have them, then you should avoid buying that particular model and start looking for an alternative. We always suggest our editors to make a list of important features before adding a product to a list and based on the feature, the quality of the product, brand-assurance, rank it! So if it has all you need, you should not mind paying a bit extra. However, if you end up buying the best hose splicer which doesn’t have the feature you need the most, then it won’t make sense! Would it? To us, it wouldn’t! That’s why you should make up a list which includes the features you are looking for, technical specifications if any, etc and come up with a budget.
2. Budget and Price Match
Well, you obviously can’t buy the best hose splicer with a low budget. That’s why it’s important to make note of all the important features, specs, factors and come up with a budget. Once you are ready with it, look for the products which are either equal to your budget or are close to it. Stick to the budget, because while browsing, you’ll see a model which is slightly better and has an additional feature with a really small price difference. Well, in that case you’ll have to calculate the price of the product which has all the required features and the hose splicer with the additional features. See if the difference in amount is worth for the feature? If you don’t have second thoughts, you shall probably increase your budget.
3. Warranty and Brand
Most of the hose splicer industry experts we got in touch suggested us to always buy the one which comes from a reputable brand. They also explicitly asked us to include the best brands so that users don’t buy the models from unknown brands or non-reputable companies. Because hose splicer from an unknown brand might be cheap at first glance, but could have high-maintenance and could cost a lot in repairs.
Another benefit of buying a hose splicer from a reputable brand would be warranty. Most of the hose splicer from reputable brands come with good warranty. However, cheap products do come with a warranty, but claiming it can be a herculean task. That’s why buy the models which come from known brands and have good warranty.
4. Check for Reviews and Ratings
Back then when the Internet wasn’t as big as it is today, local stores charged high and even ended up selling the products which sucked or wasn’t future proof. It’s because the salesman threw technical terms and confused the buyer. But nowadays, there are sites like ours which does all the research and lists down the best models and there are eCommerce stores like Amazon which has user reviews which can be read to know the experience of the user with that particular hose splicer. Isn’t it great?
The Verdict
We hope that you loved the hose splicer we’ve listed in our best list. If it has been helpful, please bookmark our website and share it with people you know whenever they plan to buy something.
To wrap up this guide,
- If you are looking for the best hose splicer: You shall consider going for Primefit HF14PU14PU-B10-P (10-Pack) 1/4″ Poly Hose Splicer
- If you want the one which has similar features to the best, then you shall consider going for Technicians Choice OPK19 Heater Hose Splicer Assortment (18 Piece)
- If you want a hose splicer which is “value for money” then you shall go for the Uenhoy 4 Pcs Brass Hose Barb Reducer, 3/8″ to 1/4″ Reducing Barb Adapter Splicer Barb Fitting for Fuel Air Water Oil Gas WOG, with Hose Clamps
- If you want the cheapest hose splicer then the 1/16″ Hose ID, Hose Barb Mender/Splicer/Joiner/Union Fitting Nickel Plated Brass Single Barb should be the best one for your needs!
