Now that you are here, you must be looking for the best jet ski bilge pump! If you aren’t for it, you shall use our search and look for the topic you are interested in. As this piece is a lengthy one and covers a few more aspects other than the best list, they are the best jet ski bilge pump brands in United States of America and a buyer’s guide for making an informed buying decision.
Before we begin with the list, We ask you to make a list of things that you are looking for in a jet ski bilge pump. It could be anything which you’ll require when doing tasks. This will help you have some clarity about the important things and will help you save money by not overspending on the features you won’t use or a product that has more features!
You surely are here for being able to make an informed buying decision when it comes to jet ski bilge pump and you must be looking for the list, We know that! But before we begin, we’d like to tell you that, this is the most unbiased list ever, it has specs, lists down the features of the jet ski bilge pump, best brands and has a dedicated buyer’s guide for people in United States of America.
Full Disclosure: This article might have a few external links to Amazon and other informative sources. When you make a purchase on Amazon using our link, we’ll earn a small fee without you having to pay extra for the item. This helps us keep the site running and publishing more awesome content, add more research and never let people buy bad-quality products!
Best jet ski bilge pump in 2021
1. Rule LP900S LoPro Bilge Pump – 900 GPH, Automatic, Beige -Sports & Outdoors
By Rule
More Pictures- Pump only operates when water is present
- Designed for tight spaces; Dimensions: 2.4″ height
- 13 VDC Power
- Discharge body mounts horizontally or vertically and swivels up to 180°
- Flow Rate: 900 GPH
2. MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue – Automatic) -Bilge Pumps
By MAXZONE- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8″); Width: Approx
- 81mm
- No power use until pump is activated by internal float switch (when water level rises)
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
3. Rule 500 GPH 25DA Standard Bilge Pump-500 -Sports & Outdoors
By Rule- Submersible and ignition protected
- Stainless-steel shaft
- Includes backflow preventer
- Non-automatic, used with a panel switch or Rule float switch
- Highly efficient, low amp motor
4. Kawasaki Jetski Jet Ski JS440 JS550 550SX 750SX 800SXR Bilge Water Fitting -Sports & Outdoors
By JLP- Offered in anodized colors
- These fittings have a 3/4″ inch hose barb flange machined on them so no hose clamp is necessary
- JLP machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits
- Hose Barb Diameter (OD): 3/4″ Inch Thread Length: 1/2″ Inch Nut Width: 1-1/4″ Inch NOTE: Install with 1″ Inch Hole Saw Bit.
5. BACOENG 12V Automatic Boat Bilge Pump, 1100GPH with Built-in Float Switch -Bilge Pumps
By BACOENG- Multi-Use- This product is designed to drain water from flooded area, water tanks, swimming pools, basement and garden pond; Made of ABS material, durable and suitable for salt water
- Parameters- DC 12V; Current(A): 3.8A; Max Flow: 1100GPH; Max Head: 10ft;1-1/8″ Discharge for 1″~1-1/4″ ID Hose
- Safety Ensure- No damage will be caused when it run dry and ignition protection will protect the pump against high current
- Built-in Flow Switch- No need to purchase and install an external float switch! It could automatically run and remove water level down to 1/2
- Removable Base & Filter- It is easy for users to install on the deck and have a quick maintenance
6. Submersible Boat Bilge Water Pump 12v 1100gph Non-Automatic Marine Electric Bilge Pump for Ponds, Pools, Spas Silent, Boat Caravan RV Submersible -Bilge Pumps
By MAXZONE- Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
- The water-cooled engine ensures a long service life
- 1-1/8″ (29mm)
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
- Built for the harsh marine environment, are suitable to withstand the most adverse condition
7. 6.5FT Bilge Pump Hose 3/4-Inch Plumbing Kit, Thru Hull Fitting Scupper, 3/4-Inch Check valve, 3 Stainless Steel Clamps -Bilge Pumps
By Aincix- (1) 3/4-Inch Thru Hull Fitting Scupper.
- (4) 3 stainless steel clamps.
- (2) 6.5ft(2 meters) total new material upgrade hose.
- (3) 3/4-Inch Check valve to avoid the back flow to your bilge.
8. Dontmiss Automatic Submersible small Boat Bilge Pump 12v 750gph Auto with Float Switch 3/4 inch (19mm) Outlet Dia, bilge pumps for boats -Sports & Outdoors
By Dontmiss- Wire Lead(M): 1m; Outlet Diameter: 19mm/ 3/4″; Width: Approx
- 81mm
- Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.
- Flow Rate (GPH): 750GPH; Volt: 12V; Current(A): 3A; Head(M): 3.0M
- No power use until pump is activated by internal float switch (when water level rises)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
9. ECO-WORTHY 1100GPH 12V Marine Electric Bilge Pump for Boat Caravan RV Submersible Non-Automatic -Bilge Pumps
By ECO-WORTHY- 1-1/8″ (29mm)
- The water-cooled engine ensures a long service life
- Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Built for the harsh marine environment, are suitable to withstand the most adverse condition
- Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia
10. Bilge Pump Manual Water Pump for Boats | Hand Pumps Siphon Boat -Sports & Outdoors
By Better Boat- This manual hand syphon pump does not require power making it ideal for emergency situations or places there is no power supply
- This hand siphoning pump features a 1″ intake nozzle and 1.25″ diameter hose allowing the hand pump hose to remove water quickly
- FEATURES A NO CLOG FILTER & A WATERTIGHT GASKET: The premium rubber seal on this waste water pump creates a watertight seal that won’t come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps for boats
- LIGHTWEIGHT, PORTABLE, MANUAL DESIGN IDEAL FOR EMERGENCIES: This hand suction pump is light, easy to handle and store making it perfect for emergency water removal in small boats, kayaks, canoes or dinghies
- EXCEPTIONAL QUALITY: Better Boat offers a comprehensive line of premium quality boating supplies and boating accessories
- You never know when you are going to take on water!
- Developed by boaters for boaters, our marine-grade products and boat accessories are made to strict, tested, trade-secret standards
- LONG HOSE MAKES WATER REMOVAL EASIER: Our manual bilge pump features a 39″ long hose that makes reaching the bottom of your boat easier and removing excess water faster
- This hand siphon pump for water features suction spacers that allow for maximum flow into the pump for speedy water removal
- Never boat without a hand held water pump for emergencies.
- We offer all the tools needed to make caring for your boat easier so you can spend less time maintaining and more time on the water
- This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy
- We stand behind the quality of our hand water pump for boat or home, other marine products and boat supplies
- Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this siphon transfer pump
- Keep this waste water pump on hand at all times
11. attwood 4614-7 Bilge Pump Installation Kit, with Tsunami T500 Bilge Pump, On/Off Switch, Hose, Thru-Hull Fitting, Hose Clamps -Sports & Outdoors
By attwood
- Kit includes 3/4-inch interior diameter x 5-foot-long corrugated hose
- Complete with 20 feet of 2-conductor 16-gauge wire and inline fuse holder with a 2-amp fuse
- Pump with innovative engineering and compact design provides most reliable aeration in contained spaces such as livewell
- Kit has 2-way on/off switch with a bezel plate and 2 Snap-It hose clamps
- Thru-hull fitting for 3/4-inch interior diameter hose
- Contains everything needed to install the included Tsunami T500 bilge pump
12. SEAFLO Submersible Automatic Bilge Pump with Float Switch (750GPH, 12V) -Sports & Outdoors
By SEAFLO
- No power use until pump is activated by internal float switch (when water level rises)
- Wire Lead(M): 1m; Outlet Diameter: 19mm/ 3/4-Inch; Width: Approx
- Built-in float switch! (No separate float switch is needed)
- 4-Year Warranty!
- 81mm
- Flow Rate (GPH): 750GPH; Volt: 12V; Current(A): 3.0A; Head(M): 3.0M
13. Amarine Made Automatic Submersible Boat Bilge Water Pump 12v 760gph Auto with Float Switch-New -Sports & Outdoors
By Amarine Made
- No power use until pump is activated by internal float switch (when water level rises)
- Compact, efficient, long life motor ; Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
- Compact, automatic, fully submersible electric pump
14. Johnson Pumps – 40004 HD Bilge Pump 12V 4000 GPH -Sports & Outdoors
By Johnson Pumps
- Package length: 16.51 cm
- Product Type: FISHING EQUIPMENT
- Package height: 23.114 cm
- Package width: 21.59 cm
15. SEAFLO Electric Marine Bilge Pumps (350 GPH) -Sports & Outdoors
By SEAFLO
- Outet Dia: 3/4″; Max Draw: 1 A; Head: 9′
- Perfect for any Marine, RV, Industrial, or Off-Grid Application
- Flow Rate: 350 GPH; Voltage: 12 VDC
- 4-Year Warranty!
16. NovelBee 12V 2000 GPH Boat Marine Electric Submersible Bilge Pump with Hose ID 29mm -Sports & Outdoors
By NovelBee
- Bilge Pump voltage:12V DC;Hose outlet dia.: 29mm (1 1/8″)
- Submersible Pump only for intermittent use and not for continuous use
- Stock automatic float switches, which turn the pump on and off at preset water levels
- Boat Bilge Pumps user manual with installation instructions and wiring diagram
- Ignition and anti-airlock protection;No burn out when run dry
17. Rule 10-6UL, Bilge Pump, 2000 GPH, Non-Automatic, 12 Volt with 6 Foot Wire Leads, White/Blue -Sports & Outdoors
By Rule
- A genuine Rule product, don’t settle for anything less
- Sport type: Boating
- Silent and vibrationless operation, stainless steel shaft, completely submersible, rust and corrosion resistant
- Compact, efficient, long-life motors, able to run dry for short periods
- 1-1/8 inch (28
- More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
- 6 millimeter) hose barb discharge outlet
18. Shoreline Marine Bilge Pump with Float Switch, 800 GPH -Sports & Outdoors
By Shoreline Marine
- outlet hose barb is designed to be used with standard ¾” I.D
- The ¾” O.D
- The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump
- bilge hose
- The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off
- The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH
- It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade
19. Ultimate Heavy Duty Bilge Pump Switch, 12v (See Second Image for More Detail) -Sports & Outdoors
By Skippers
- Activates buzzer after two minutes of pumping to indicate excessive pumping
- 5″ high x 1-3/4″ diameter
- Five feet of Marine Grade Tinned Wire leads
- Includes red light panel and piezo buzzer.Red light indicates pump is running
- Heavy Duty 30 amp rating
20. Amarine Made 1500GPH 12v Boat Bilge Pump Marine Plumbing Electric Bilge Pump with Float Switch-29mm ID Hose Low Noise -Bilge Pumps
By Amarine Made
- Heavy duty motors, offer high capacity output Water cooled long-life motors ; Ignition protection Water/moisture tight seals; Stainless steel shafts; Rustproof and corrosion resistant
- thermoplastic bodies submersible bilge pumps are tough enough for any bilge
- Unique automatic “discharge” function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing
- Snap lock strainer base for easy installation and removal; Silent and vibrationless operation
- Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
- Heavy duty motors with stainless steel shafts and tough
21. creatorele Submersible Marine Auto Boat Bilge Pump 1100GPH Electric Boat Plumbing Automatic 12V -Bilge Pumps
By creatorele
- Totally submersible and ignition protected.Compact pump for smaller vessels
- All-in-one pump & switch – No float switch required.Pump turns on when water level rises & shuts off when water is removed
- Tough plastic body.Limited one year warranty.
- recommended discharge head 2.5m.
- Can be used with switch panel for manual override.Includes comprehensive user manual with installation instructions and wiring diagram.
- Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
- Output: Up to 1100 gallons/hour
- Snap-off strainer for easy cleaning.
- Connections: For 19mm (3/4″) bore hose for 600GPH &750GPH, 29mm hore hose for 1100GPH
22. 12v Seaflo Automatic Bilge Pump 750 GPH -Sports & Outdoors
By SEAFLO
- Comprehensive user manual with installation instructions and wiring diagram
- 750 GPH Pumping Capability
- NEW 12V Automatic Bilge Pump
- No separate float switch needed!
23. Johnson Pumps 01674-001 1600 GPH Heavy Duty Automatic Bilge Pump with Ultima Switch, 12V,Red -Sports & Outdoors
By Johnson Pumps
- 1600 GPH straight capacity
- 1-1/8″ and 1-1/4″ connections
- Heavy duty submersible bilge pump with tough thermoplastic body and Ultimate switch
- Lip seal on motor
- Liquid cooled 12-pole motor with double ball bearings
24. Amarine Made 3700 GPH 12v Boat Marine Plumbing Electric Bilge Pumps (3700gph 12v) -Bilge Pumps
By Amarine Made
- Heavy duty motors with stainless steel shafts and tough
- Unique automatic “discharge” function can bear the long-term continuous operation under nearly congestion condition
- The Amarine-made submersible bilge pumps are tough enough for any bilge.
- Impact resistant ABS housing
- thermoplastic bodies
- High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour)
- Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
25. Amarine Made 1500GPH 12v Boat Marine Plumbing Electric Bilge Pump-29mm ID Hose -Bilge Pumps
By Amarine Made
- thermoplastic bodies submersible bilge pumps are tough enough for any bilge
- Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
- Heavy duty motors, offer high capacity output Water cooled long-life motors ; Ignition protection Water/moisture tight seals; Stainless steel shafts; Rustproof and corrosion resistant
- Unique automatic “discharge” function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing
- Snap lock strainer base for easy installation and removal; Silent and vibrationless operation
- Heavy duty motors with stainless steel shafts and tough
26. AURELIO TECH 750GPH Automatic Submersible Small Boat Bilge Water Pump with Float Switch 3/4 inch (19mm) Outlet Diameter Hose -Bilge Pumps
By AURELIO TECH
- 8 meters (height of vertical water flow up pipe); Current draw: 3 Amp
- Maximum delivery head: 3
- 05″)
- 1m long; Model: SFBP1-G750-06
- Hose Outlet: 19mm (3/4″); Dimensions: Length 145mm (5
- 27″) x 103mm (4
- Voltage: 12V DC; Flow capacity: 750 Gallons per hour (2850 Liters per hour) – 47
- (No separate float switch is needed)
- Ignition protected; 3-wire lead, approx
- 5 Liters per minute
- 71″) x Width 83mm (3
- Tough plastic body automatic bilge pump with built-in float switch
27. Rule 20R 800 GPH Submersible Bilge Pump, Round, 12 Volt -Sports & Outdoors
By Rule
- Rust and corrosion protection, silent and vibrationless operation
- High pumping capacity and reliability at a lower cost, ability to run dry for short periods
- Pump and switch are stand-alone products, compact, efficient, long-life motors
- 3/4 inch (38mm) hose barb
- Easy-clean, snap-lock strainer bases
28. AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise with The Switch -Bilge Pumps
By AIRTAK
- Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers
- Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water
- the life-span of the bilge pump could be prolonged.
- Easy to Install: Design common installation location and it can use with the bilge switch
- Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection
- Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency
29. Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire -Sports & Outdoors
By attwood
- Patented shaft seal prevents leaks caused by misalignment, caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion
- Innovative engineering and compact design to provide the most reliable bilge pumping performance
- Tsunami cartridge pumps have replaceable / interchangeable motor cores
- Powerful, reliable pump is rated for 800 gallons per hour (gph) output at design voltage 13.6 volts DC, or 760 gph at nominal voltage of 12 volts DC
- Boaters, boat-builders and dealers all want one thing from their bilge pumps: more power! And that’s what the Tsunami Series delivers with high-capacity, high-efficiency output
- Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets
- Makes servicing simple and quick
- 12-volt pump has a barbed ¾-inch outlet and is connected with 29-inch wire
30. Amarine Made 12V 750GPH Boat Marine Plumbing Electric Bilge Pump for Marine Boat Yacht Fully Submersible -Sports & Outdoors
By Amarine Made
- 12v 750gph bilge pump;19mm ID Hose;2.5amp 5.0amp puse
- 3/4″ nylon hose barb allows for multiple connection options
- Heavy duty motors with stainless steel shafts and tough.thermoplastic bodies
- Anti-Airlock protection;Run dry capable for normal workloads
- ABS exclusive mositure tight seal;Easy clean snap-lock strainer base
31. Johnson Pump 05903-00 Cartridge Combo Automatic Submersible Bilge Pump – 12V, 1000 GPH, red -Bilge Pumps
By Johnson Pump
- Pumps include both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
- Ports eliminate stress cracking caused by overtightened hose clamps
- Flow Rate: 1000 GPH
- Automatic operation from the electro-magnetic float switch
- Equipped with easy-to-install Dura-Port discharge ports
32. Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500 -Sports & Outdoors
By Rule
- Submersible and ignition protected
- High efficiency, low amp motor
- Includes backflow preventer
- Completely automatic with manual override; no float switch needed
- Stainless-steel shaft
33. Boat Bilge Water Pump 12 V 1100 GPH Electric Marine Bilge Pump and Automatic Boat Bilge Pump Float Switch 12 V 24 V 32 V for Boats, 2 Pieces in Total -Bilge Pumps
By Outus
- Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently; It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure
- Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts); Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m; The float switch’s max amps 12 volts: 20 A; Max amps 24 volts: 10 A; Max Amps 32 volts: 8A; The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG
- Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm); It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning
- Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and most marine, RV, etc.; And it can also be applied in aquarium, small swimming pool, fountain and other places that need drain the water
- What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily
34. Johnson – 32503 Cartridge Bilge Pump 500 GPH -Bilge Pumps
By Johnson
- Package width: 13.5 cm
- Product Type: FISHING EQUIPMENT
- Package length: 7.9 cm
- Package height: 15.0 cm
35. Shoreline Marine Bilge Pump 600 GPH -Sports & Outdoors
By Shoreline Marine
- Marine Grade Wiring
- This universal mounting base is designed to be mounted either through the bottom or through the side so it can be screwed down or to the side into a stringer or the transom
- 600 GPH Output
- Its ignition protected, uses a very low 3 amps operating current and has tinned marine grade lead wires
- The ¾” O.D
- The bilge pump is fully submersible with a pumping capacity of 600 GPH
- Includes Mounting Bracket And Stainless Steel Hardware
- outlet hose barb is designed to be used with standard ¾” I.D
- bilge hose
- The Shoreline Marine 600 GPH bilge pump securely clips into the mounting base for easy installation and allows for removal to clean and inspect the pump
36. Amarine Made Automatic Bilge Pump Submersible Small Electric Boat Bilge Pump 12v 750gph Auto with Float Switch 3/4 inch Outlet Diameter, Bilge Pump for Boats -Bilge Pumps
By Amarine Made
- Suitable for hydraulic systems fed with cold water-used in line to be fed by gravity or pressure, Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc.
- Automatic, fully submersible electric fully submersible automatic bilge pump : Amarine-made Branded.Built-in float switch! (No separate float switch is needed)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.No power use until pump is activated by internal float switch (when water level rises)
- The float triggered automatically and the ejection rate was impressive.
- Long life motor ; Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing.
- Works beautifully on automatic with the activation float turning it on with the brown/white to positive, and the black to negative
37. Whale SS5212 Supersub Smart 650 Electric Bilge Pump, Suitable for Use with Fresh or Salt Water, 12V DC, 3.4 Amps, Open Flow Rate of 650 GPH @ 13.6V DC, 16 AWG Wire, ¾-Inch and 1-Inch Hose Connections -Sports & Outdoors
By Whale
- 12V DC, 3.4-amp pump has open flow rate of 650 gph @ 13.6 V DC, connects with 16 AWG wire, has ¾-inch and 1-inch hose connections, and measures 3 inches H x 2 1/8 inches W x 8 3/8 inches L
- Features multi-position pump head and body, built-in non-return valve and stepped port, and integrated bleed ball that prevents airlocks
- Low-profile, narrow automatic electric Bilge Pump can be installed deep in bilge in areas such as under engines or under cockpit floors
- Environmentally friendly and mercury-free, designed with solid state switching so there are no moving parts
- Performance is unaffected by wave motion, and it is engineered for optimal on/off timings to prevent unnecessary run-on
- New installation wedge optimizes pump operation, and pump can be rotated to accommodate installation space
- Suitable for use with fresh or salt water
38. Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter：1 1/8″) (1100GPH three wires) -Bilge Pumps
By Dontmiss
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 0.95 Inch (1-1/8″); Width: Approx
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
- No power use until pump is activated by internal float switch (when water level rises)
- Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.
- 81mm
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
39. 10 Amp Breaker On Off Auto Bilge Pump -Sports & Outdoors
By Shoreline Marine
- 3 ½ X 2 inches : Aluminum Face Plate
- 10 AMP Breaker
- LED Light Indicates When Switch Is On
- Easy To Follow Wire diagram
- Booted Toggle Switch
40. Dontmiss Submersible Boat Bilge Water Pump 12v 1500gph Non-Automatic Marine Electric Bilge Pump for Ponds, Pools, Spas Silent, Boat Caravan RV Submersible（Outlet Diameter: 1 1/8″） (1500GPH) -Bilge Pumps
By Dontmiss
- Heavy duty motors with stainless steel shafts and tough
- thermoplastic bodies
- 1-1/8″ (29mm)
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia
- Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
- Unique automatic “discharge” function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
- Flow Rate: 1100 GPH; Voltage: 12 VDC
41. SEAFLO Automatic 1100GPH Submersible Bilge Water Pump 4 Year Warranty Boat 1100 Auto with Magnetic Float Switch -Sports & Outdoors
By SEAFLO
- Flow Rate (GPH): 1100 GPH; Volt: 12V; Current(A): 3.0A; Head(M): 3.0M
- Built-in magnetic float switch for longevity! (No separate float switch is needed)
- 83mm
- Wire Lead(M): 1m; Outlet Diameter: 1-1/8″-Inch; Width: Approx
- All new, patent pending design!
42. OASIS MARINE Automatic Submersible Boat Bilge Water Pump 12v 750 GPH Automatic with Float Switch Built in 3/4 inch Outlet -Bilge Pumps
By OASIS MARINE
- All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both
- OASIS MARINE 2 YEAR WARANTY
- Snap off strainer for easy cleaning
- 750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump
- Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring
43. attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire -Sports & Outdoors
By attwood
- Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations
- Installs quickly and easily in tight spaces, mounts horizontally only
- Reliably provides bilge water pumping for boats of any size
- Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit
- 12-volt, 1.5-amp draw pump is rated for 500 GPH performance at open flow (at voltage of 13.6 volts DC)
- Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose
- Also convenient and useful for boats of any size
44. Amarine-made 12v 1100gph Auto Boat Bilge Pump Automatic Submersible Boat Bilge Water Pump (A: 1100gph Auto pump) -Bilge Pumps
By Amarine Made
- Compact, efficient, long life motor ; Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing
- Built-in float switch! (No separate float switch is needed)
- No power use until pump is activated by internal float switch (when water level rises)
- Compact, automatic, fully submersible electric pump
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
45. SeaSense Hand Bilge Pump (18″) w Hose (20″) (50002320) -Sports & Outdoors
By SeaSense
- Self-priming
- Light weight
- Anti-leak design
- Corrosion resistant
- Removable hose for easy storage
- Reaches small, compact areas with ease
Jet ski bilge pump – The Buyer’s Guide
You must have checked the above list, aren’t you mind-blown by the quality of products? Well, if you are then here’s a secret formula which we’ve used to choose them. You can use them too! The best part is, it works for all the product purchases you make! Besides, wouldn’t it be helpful to you, if you knew the factors we’ve considered to choose the jet ski bilge pump in the above list? So shall we begin with the guide and help you learn about the important factors?
1. Does it have the features you need?
Wait for a minute before you buy the jet ski bilge pump, check if it has all the features in your requirement list! If it doesn’t have them, then you should avoid buying that particular model and start looking for an alternative. We always suggest our editors to make a list of important features before adding a product to a list and based on the feature, the quality of the product, brand-assurance, rank it! So if it has all you need, you should not mind paying a bit extra. However, if you end up buying the best jet ski bilge pump which doesn’t have the feature you need the most, then it won’t make sense! Would it? To us, it wouldn’t! That’s why you should make up a list which includes the features you are looking for, technical specifications if any, etc and come up with a budget.
2. Budget and Price Match
Well, you obviously can’t buy the best jet ski bilge pump with a low budget. That’s why it’s important to make note of all the important features, specs, factors and come up with a budget. Once you are ready with it, look for the products which are either equal to your budget or are close to it. Stick to the budget, because while browsing, you’ll see a model which is slightly better and has an additional feature with a really small price difference. Well, in that case you’ll have to calculate the price of the product which has all the required features and the jet ski bilge pump with the additional features. See if the difference in amount is worth for the feature? If you don’t have second thoughts, you shall probably increase your budget.
3. Warranty and Brand
Most of the jet ski bilge pump industry experts we got in touch suggested us to always buy the one which comes from a reputable brand. They also explicitly asked us to include the best brands so that users don’t buy the models from unknown brands or non-reputable companies. Because jet ski bilge pump from an unknown brand might be cheap at first glance, but could have high-maintenance and could cost a lot in repairs.
Another benefit of buying a jet ski bilge pump from a reputable brand would be warranty. Most of the jet ski bilge pump from reputable brands come with good warranty. However, cheap products do come with a warranty, but claiming it can be a herculean task. That’s why buy the models which come from known brands and have good warranty.
4. Check for Reviews and Ratings
Back then when the Internet wasn’t as big as it is today, local stores charged high and even ended up selling the products which sucked or wasn’t future proof. It’s because the salesman threw technical terms and confused the buyer. But nowadays, there are sites like ours which does all the research and lists down the best models and there are eCommerce stores like Amazon which has user reviews which can be read to know the experience of the user with that particular jet ski bilge pump. Isn’t it great?
The Verdict
We hope that you loved the jet ski bilge pump we’ve listed in our best list. If it has been helpful, please bookmark our website and share it with people you know whenever they plan to buy something.
To wrap up this guide,
- If you are looking for the best jet ski bilge pump: You shall consider going for Johnson Pumps – 40004 HD Bilge Pump 12V 4000 GPH
- If you want the one which has similar features to the best, then you shall consider going for Rule 10-6UL, Bilge Pump, 2000 GPH, Non-Automatic, 12 Volt with 6 Foot Wire Leads, White/Blue
- If you want a jet ski bilge pump which is “value for money” then you shall go for the AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise with The Switch
- If you want the cheapest jet ski bilge pump then the Kawasaki Jetski Jet Ski JS440 JS550 550SX 750SX 800SXR Bilge Water Fitting should be the best one for your needs!
