Now that you are here, you must be looking for the best 1000 watt 1 ohm stable amp! If you aren’t for it, you shall use our search and look for the topic you are interested in. As this piece is a lengthy one and covers a few more aspects other than the best list, they are the best 1000 watt 1 ohm stable amp brands in United States of America and a buyer’s guide for making an informed buying decision.
Before we begin with the list, We ask you to make a list of things that you are looking for in a 1000 watt 1 ohm stable amp. It could be anything which you’ll require when doing tasks. This will help you have some clarity about the important things and will help you save money by not overspending on the features you won’t use or a product that has more features!
You surely are here for being able to make an informed buying decision when it comes to 1000 watt 1 ohm stable amp and you must be looking for the list, We know that! But before we begin, we’d like to tell you that, this is the most unbiased list ever, it has specs, lists down the features of the 1000 watt 1 ohm stable amp, best brands and has a dedicated buyer’s guide for people in United States of America.
Full Disclosure: This article might have a few external links to Amazon and other informative sources. When you make a purchase on Amazon using our link, we’ll earn a small fee without you having to pay extra for the item. This helps us keep the site running and publishing more awesome content, add more research and never let people buy bad-quality products!
Best 1000 watt 1 ohm stable amp in 2022
1. BOSS Audio Systems PT1000 2 Channel Car Amplifier – 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable -Dual-Channel Amplifiers
By BOSS Audio Systems
More Pictures- Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Gain Control – The gain control is not for adjusting volume
- 25”, Weight: 6
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current
- 62 lbs.
- 31” x 2
- Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- 5” x 10
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
- Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs – Dimensions: 9
- We strongly encourage professional installation of this product to ensure proper and safe functionality
2. Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W -Dual-Channel Amplifiers
By Skar Audio- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
- Damping Factor – 150<
- Class D MOSFET Monoblock Power Amplifier
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
3. BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier – 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo -Dual-Channel Amplifiers
By BOSS Audio Systems- Variable Input Gain Control – The gain control is not for adjusting volume
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current
- Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies
- Warranty – BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com
- Specs – Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
- It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Power – 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
- Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- A high level (+/- wire) input is measured in wattages
- Switchable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Both essentially carry signal from your receiver to your amplifier to your speakers
- You can set exact sound specifications for the bass frequency reproduction
- Low & High Level Inputs – A low level (RCA) input is measured in voltages
- We strongly encourage professional installation of this product to ensure proper functionality
4. SoundBox SCAP2D, 2.5 Farad Digital Capacitor for Car Audio – 2500 Watts -Dual-Channel Amplifiers
By SoundBox- Soft Turn-On/Off Power Surge
- Digital Over-Voltage Protection System
- High Strength Cylindrical Aluminum Housing
- Bright Charging Status L.E.D.
- 2.5 Farad Digital Capacitor with 2500 Watts Stabilizing Amplifier Flow Capacity
5. Moukey Home Audio Amplifier Stereo Receivers with Bluetooth 5.0, 220W 2 Channel Power Amplifier Stereo System, w/USB, SD, AUX, MIC in w/Echo, LED for Home Theater Speakers via RCA, Studio Use – MAMP1 -Electronics
By Moukey- FM antenna and remote control are included in the stereo amplifier package for distant audio adjustments.
- Provide you with enough powerful power amplification, which can accommodate 2 sets of speakers, so that you can enjoy the home audio impact of high-quality audio amplification.
- ️220 WATTS PEAK POWER: The dual-pass Moukey Bluetooth stereo amplifier receiver is perfect for your karaoke, home theater, acoustic sound system, and monitor headphones
- ️BLUETOOTH 5.0 WIRELESS CONNECTION: The sound amplification mixer device is equipped with Bluetooth music streaming with a wireless range of 40 feet / 12 meters or more
- 2 RCA audio inputs for tuner, CD player, tape drive, two 2.5-inch / 6.35 cm microphone inputs, headphone output port, USB, SD card, 3.5mm AUX IN and FM radio antenna
- ️EASY BALANCE CONTROL: The improved professional compact bookshelf sound amplifier with clear, responsive buttons for mode control
- Knobs control microphone echo / volume, balance, bass, treble, master volume, input source and unique folder / track.
- Compatible with today’s latest devices (including smartphones, iPads, iPhones and computers), this stereo amplifer is easy to pair with the receiver.
- ️MULTIPLE INPUT AND OUTPUT MODES: The digital amplifier box supports various external signal sources
- With the special monitor headphone output design, so you can enjoy audio all the time without the worry that bother others.
- ️HD SCREEN: The integrated receiver for home stereo has a built in LED display w/ front panel audio control center
- With RCA audio output, 2 pairs of banana plug speaker output
6. Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier -Dual-Channel Amplifiers
By Skar Audio- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Marine Class D MOSFET Monoblock Power Amplifier
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
7. Pyle 4 Channel Wireless Bluetooth Amplifier – 3000 Watt Stereo Speaker Home Audio Receiver w/ FM Radio, USB, 2 Microphone w/ Echo for Karaoke, Front Loading CD DVD Player, LED, Rack Mount – PD3000BA -Electronics
By Pyle- It gives you 3000W peak power to be used for multi speakers with 2-8 ohms impedance allowing you to enjoy high quality audio
- 3000 WATT POWER: The Pyle 4 Channel Pre Amplifier is perfect for your karaoke and home entertainment sound system
- DISPLAY METER: The compact and rack mount amplifier has a built in digital fluorescent display meter which displays all the functions and input used
- NOTE : PD3000BT is just an upgraded version of the PD3000BA
- EQ CONTROLS: The speaker sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization and master volume adjustments
- Remote control is also included in the package for distant audio adjustments
- It also features blue LED illuminated buttons and knobs for high visibility
- BLUETOOTH COMPATIBLE: The professional integrated indoor house stereo receiver is equipped with Bluetooth wireless music streaming
- Works w/ today’s latest devices including smartphones, tablets, laptops, and computers with hassle free receiver pairing
8. Planet Audio PL3000.1D Class D Car Amplifier – 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers -Dual-Channel Amplifiers
By Planet Audio- Variable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- You now have the ability to connect more subwoofers to take advantage of the extra power
- Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Specs – Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.
- Power – 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
- 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating
- Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- Excess energy is stored until it’s needed instead of being converted into heat
- You can set exact sound specifications for the bass frequency reproduction
- Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies
- Class D – Power loss is significantly reduced making the amplifier highly efficient
- Strapping Capable – You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s)
9. Pyle Hydra Marine Amplifier – Upgraded Elite Series 1000 Watt 4 Channel Bridgeable Amp Tri-Mode Configurable, Waterproof, MOSFET Power Supply, GAIN Level Controls and RCA Stereo Input(PLMRA420) -Dual-Channel Amplifiers
By Pyle- These are to protect the amp and your vehicle’s electrical system from short circuit conditions
- Variable bass boost of up to 18dB at 60Hz
- Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
- It also has high and low electronic crossover network or pass filters
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs
- 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready
- High-level MOLEX and gold-plated low-level RCA inputs with adjustable input level
- Variable high- and low-pass filters with crossover mode selector
- Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
- Overload, Short Circuit, and Thermal protection with LED indicator
- It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator
- If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
- POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply
10. Planet Audio AC1500.1M Monoblock Car Amplifier – 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control -Dual-Channel Amplifiers
By Planet Audio- a low-pass filter will primarily keep high notes out of your subwoofer(s)
- this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
- high level inputs: speaker level inputs are commonly referred to as high-level inputs
- variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
- this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
- power: max power output of 1500 watts at 2 ohms into one channel
- low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting
- maximum power output of 750 watts at 4 ohms into one channel
- low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit
11. DS18 S-1200.4/RD Car Audio Amplifier – 4 Channel, Full Range, Class Ab, 1200 WATTS (Red) -Multichannel Amplifiers
By DS18
- FULL RANGE AMP – If you are looking for an amplifier that can handle the full frequency range then look no further! Wire the most powerful midranges, tweeters, drivers, or coaxial to this full range series.
- Never again will you need to worry about having the right amp for the job.
- You’ll have all the power you need while utilizing state-of-the-art technology that requires less energy.
- NEVER STOP INNOVATING ATTITUDE – DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
- AMAZING POWER – Capable of 1,200 Watts Max with high efficiency in mind gives you the best of both worlds
- WIDE RANGE OF APPLICATIONS – Ranging from 1-4 ohms, this amplifier will allow you to use a variety of speakers for your specific application
12. Blaupunkt 1500W 1-Channel, Monoblock Amplifier -Electronics
By BLAUPUNKT
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- Compactly built so this amplifier can fit perfectly into any trunk
- 1500W Maximum Power Monoblock Amplifier
13. BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control -Multichannel Amplifiers
By BOSS Audio Systems
- 8 GA Red Power Cable, 16 ft
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current
- Switchable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Amplifier Power – 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
- 18 GA Blue Turn-On Wire, 3 ft
- Split Loom Tubing, 3 Rubber Grommets, 20 4″ Wire Ties, 20 ft
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
- Wiring Kit Continued – 10 5/16″ and 1/4″ Ring Terminals, 6 ft
- Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Wiring Kit – 30 Ft Speaker Wire, 20 ft
- High Performance blue RCA (TRCA) Interconnect
- It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- You can set exact sound specifications for the bass frequency reproduction
- Specs – Dimensions: 9.1” x 10.4” x 2.3”, Weight: 4.4 lbs.
- 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
- Warranty – BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com
- We strongly encourage professional installation of this product to ensure proper and safe functionality
- Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies
14. Skar Audio SDR-10 D4 10″ 1200 Watt Max Power Dual 4 Ohm Car Subwoofer -Multichannel Amplifiers
By Skar Audio
- 2.5″ 4-Layer High Temperature Copper voice Coil
- High Roll Foam Surround and Competition Grade Pressed Paper Cone
- 10-Inch Dual 4-ohm Car Subwoofer
- High Flux Ferrite Motor | Advanced Air Flow Cooling Design
- Peak Power: 1,200 Watts | RMS Power: 600 watts
- Frequency Response Range: 28 Hz – 300 Hz | Sensitivity: 82.5 dB
15. Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1 -Multichannel Amplifiers
By Kicker
- Variable 12dB crossovers provides control to dial in perfect sound
- 24dB subsonic filter for protection from potentially damaging frequencies
- KickEQ 6dB variable bass boost for those additional low frequencies
- Efficient Class-D amplifier
- Variable 12dB crossovers provides control to dial in perfect sound
16. Lanzar B52 Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG137) , BLACK -Multichannel Amplifiers
By Lanzar
- This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
- Please update the listing’s title, description, & bullets.
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest
- RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
- Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels
- GREAT DEAL: Often a monoblock amp comes with a high price tag
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal
17. LZSIG Home Audio Receiver Amplifier Peak Power 110W x 2 Channel Stereo Karaoke Amplifier w/MP3, USB, SD, AUX, RCA, MIC Jack,Headphone Jack, FM, LED, Reverb Echo, for for Home/Studio/Bedroom – LAMP1 -Electronics
By LZSIG
- Suitable for home audio/bedroom/conference/karaoke/bar etc
- [EXCELLENT SOUND SYSTEM] — Unique HiFi audio circuitry, Professional acoustic laboratory for adjustment, signal-to-noise ratio up to 80dB, while the distortion is only: ≤ 1%, frequency response range 40-15000 Hz, the data performance is quite strong
- Built-in Reverb ECHO sound effect, so you can sing karaoke for added fun
- Receiver for speakers Recommended with 5 ~ 8 inches / 4 ~ 16Ω Passive Bookshelf Speakers/Front Speakers/Surround Speakers/Outdoor speakers
- [WIRElESS CONTROL] — Home stereo system wirelessly connects to your Phone Tablet Digital TV and other components within 32 feet
- [HIGH POWER STEREO AMPLIFIER] — This is a Medium-sized Multifunctional Stereo Amplifier Driven by 2 x Toshiba High-Power Transistors Peak power 110W x 2 Channels (RMS 25WX2) Suitable For Most Living Room / Bedroom Use
- High quality infrared remote control, can give commands to reciever within 16 feet for remote operation.
- [KARAOKE AND RADIO] — Built-in dual microphone amp, easily drive wireless or wired dynamic microphone Built-in headphone amplifier, can drive 16 ~ 32 Ohm headphones
- The radio receiver uses an automatic channel search chip to search and save the FM band range of 76~108MHz.
- If you have any questions about using it, we will surely reply you within 24 hours.
- (Speakers not included)
- [OTHER FEATURES AND SERVICES] — Quick selection function after reading MP3 files from USB and SD card (only up to 32G)
- For the pursuit of sound quality and like to listen to music customers, increased the left and right audio balance adjustment and high and low tone adjustment knob, to ensure that the power amplifier to play a professional level.
- audio input function for AUX, CD, DVD, projector, RCA audio output function
18. Crunch PX1000.4 Power Amplifier (Class Ab, 4 Channels, 1,000 Watts), 3.70in. x 12.60in. x 10.80in. -Multichannel Amplifiers
By Crunch
- Bridgeable
- Low-noise preamp
- Variable input voltage
- QTD (Quick Thermal Dispersion) technology heat sink
19. Skar Audio EVL-8 D4 8″” 1200 Watt Max Power Dual 4 Ohm Car Subwoofer -Multichannel Amplifiers
By Skar Audio
- Authoritative and Powerful High Flux 122 Oz
- 2.5″” Dual 4-ohm High Temperature 4-Layer Copper Voice Coil with Black Coating | Sensitivity: dB
- Double Stack Ferrite Magnet | Bl: n/a
- Utilizes a High Roll Foam Surround Stitched to a Competition Grade Pressed Paper Cone
- Peak Power: 1 200 Watts | RMS Power: 600 Watts
- Extremely Dynamic and Powerful Low End Frequency Response for Incredible Bass | Fs: Hz
20. Skar Audio SKv2-1500.1D Monoblock Class D MOSFET Competition Grade Subwoofer Amplifier, 2200W Max Power -Electronics
By Skar Audio
- Peak Power at 1 Ohm: 2,200 Watts | RMS Power at 1 Ohm: 1,500 Watts
- Heavy Duty Advanced Heatsink Design Allows for Maximum Cooling & Efficiency | On-board Bass Boost Control (0-9dB)
- Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier
- User Adjustable Low Pass Filter (Variable): 35Hz – 250Hz, Remote Subwoofer Level Control Included
- Featuring 4-Way Protection Circuitry and 1/0 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 Ohm, Frequency Response: 15Hz – 270Hz
21. Skar Audio SK-M9005D Compact Full-Range Class D 5 Channel Car Amplifier, 900W -Electronics
By Skar Audio
- Frequency Response: 10Hz – 20kHz for CH 1-4 & 10Hz – 500Hz for CH 5
- Remote Bass Knob/Cable and Speaker Output Adapter Harness Included
- Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
- RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14
- Ultra Compact MOSFET 5-Channel Class D Car Amplifier
22. Taramps HD 3000 1 Channel 3000 Watts Rms Car Audio Amplifier 2 Ohms -Industrial & Scientific
By Taramp’s
- 9” x 2.56” x 7.32”
- Technology and Sophistication
- Using for speakers, drivers and tweeters
- 10Hz to 20KHz
- Full Range
23. Rockville dB14 4000w Peak/1000w RMS Mono 2 Ohm Amplifier Car Audio Amp -Multichannel Amplifiers
By Rockville
- Remote Dashboard Subwoofer Control
- Phase Control Switch
- 100 Amp Maxi Fuse
- Status Mode LED Indicator
- Full IC-Controlled Protection Circuitry
- Optical Coupler Class “D” Technology
- Bass Remote
- Low Pass Filter: 50Hz – 250Hz.
- 8 Volt Preamp Circuitry
- Damping Factor: >150 @ 100Hz
- Mounting Screws
- High-Speed MOSFET Power Supply
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- Owner’s manual
- Mute and Delay Soft Start System
- – 2 Ohm: 1000 Watts x 1 Channel <1% THD+N
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Birth sheet with tested power
- Warranty.
- – 4 Ohm: 2400 Watts x 1 Channel
- Subsonic Filter: 15Hz – 55Hz
- Fully Adjustable 12dB Bass Equalizer
- RCA Preamp Line Output
- Minimum THD at Rated Power: <0.1%
- S / N Ratio: >90dB
- – 2 Ohm: 4000 Watts x 1 Channel
- Dimensions: (W x H x L) 9″ x 2.4″ x 15.5″
- Under Voltage Protection at 10V
- Rockville dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp
- Includes: Amplifier
- Frequency Response: 15Hz – 250Hz
- – 4 Ohm: 600 Watts x 1 Channel <1% THD+N.
- Over Voltage Protection at 16V.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
24. Planet Audio PL2000.1M Monoblock Car Amplifier – 2000 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Subwoofers -Multichannel Amplifiers
By Planet Audio
- 1000 W MAX Power @ 4 Ohm x 1 Channel
- 2000 W MAX Power @ 2 Ohm x 1 Channel
- Dimensions: Depth 12.8” x Width 7” x Height 2.4”
- Blue Backlit Illumination
- High and Low Level Inputs
- Variable Low Pass Crossover, Variable Bass Boost
- Remote Subwoofer Control
25. CT Sounds CT-1500.1D Compact Class D Car Audio Monoblock Amplifier, 1500 Watts RMS -Electronics
By CT Sounds
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
26. Taramp’s MD 1800.1 1 Ohm 1800 Watts Class D Full Range Mono Amplifier -Multichannel Amplifiers
By Taramp’s
- 1 ohm
- Bass boost
- Mono
- 1800 watts
- Excellent for voice as well as bass
27. Audiobank Monoblock 7000 WATTS Amp Class D 1OHM Car Audio Stereo Amplifier Remote Turn On/Off Circuit/Heavy-Duty Aluminium Alloy Heatsink Power and Protection Indicator P7001 -Multichannel Amplifiers
By Audiobank
- Thermal and Speaker Short Protection Circuitry
- Remote Turn-On / Turn-Off Circuit
- 1 Ohm Stable Operation & Soft Turn On Circuit
- LED Power and Protection Indicators
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
28. BOSS Audio Systems AR3000D Class D Car Amplifier – 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply -Multichannel Amplifiers
By BOSS Audio Systems
- Power – 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms, 6000 Watts Max Bridged x 1 @2-Ohms
- Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies
- Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- Excess energy is stored until it’s needed instead of being converted into heat
- You now have the ability to connect more subwoofers to take advantage of the extra power
- 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating
- We strongly encourage professional installation of this product to ensure proper and safe functionality
- Class D – Power loss is significantly reduced making the amplifier highly efficient
- Strapping Capable – You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s)
- Specs – Dimensions: 12.31” x 6.50” x 2.80”, Weight: 6.86
- Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com
- Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- You can set exact sound specifications for the bass frequency reproduction
29. Rockford Fosgate R2-500X1 Prime 500-Watt Mono Amplifier -Multichannel Amplifiers
By Rockford Fosgate
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
- The R2-500X1 full-range class-D mono amplifier (1.9″ x 6.8″ x 8.5″) is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
- Featuring C.L.E.A.N
- circuitry to help you adjust your gain settings, a P.O.W.E.R
- Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
30. Bluetooth Home Audio Amplifier System – Upgraded 6 Channel 750 Watt Wireless Home Audio Sound Power Stereo Receiver w/ USB, Micro SD, Headphone, 2 Microphone Input w/ Echo, Talkover for PA – Pyle -Multichannel Amplifiers
By Pyle
- MIC TALK-OVER FUNCTION: The professional sound amplifying device features a MIC talk-over function which when activated the current music or audio being played will be temporarily halted
- Also features 2 ¼” microphone inputs
- POWERFUL 750 WATT: The Pyle 6-Channel Bluetooth Home Audio Amplifier gives you 750W peak power which can be used for multi speakers w/ 4-8 ohms impedance allowing you to enjoy high quality audio
- Perfect for your PA and home theater entertainment
- A remote control is also included in the package for distant audio adjustments
- INTEGRATED EQUALIZER: The compact amplifier has crisp buttons for the audio sources and selectors, rotary knob for equalization, mic and master volume adjustments
- BLUETOOTH CAPABLE: The personal portable digital amp box works with today’s latest devices including smartphones, tablets, laptops and computers as it is equipped with Bluetooth wireless music streaming with hassle-free receiver pairing
- MULTIPLE INPUTS: The integrated indoor stereo receiver supports iPod or MP3, USB, micro SD, AUX playback, built-in FM radio w/ digital LCD display, audio input and REC + subwoofer output RCA (L/R) connectors
- This function is used in paging, voice-over, and announcements
31. Rockford Fosgate R2-500X4 Prime 500-Watt 4-Channel Amplifier -Dual-Channel Amplifiers
By Rockford Fosgate
- Featuring fully adjustable 12 dB/octave high and low pass Butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls
- Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
- circuitry to help you adjust your gain settings, a P.O.W.E.R
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- The R2-500X4 full-range class-D 4-channel amplifier (1.9″ x 6.8″ x 10.1″) is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
- Featuring C.L.E.A.N
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 75 Watts x 4 @ 4Ω OR 155 Watts x 4 @ 2Ω OR 250 Watts x 2 @ 4Ω Bridged/Mono)
32. Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier,BLACK -Dual-Channel Amplifiers
By Rockford Fosgate
- Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter
- Power Wire Gauge- 4 AWG
- Input Sensitivity: 150 mV to 4 V
- Includes wired remote (Punch Level Control)
- High efficiency amplifier design that reduces current consumption from the charging system
- On-board Punch EQ with +18dB boost at 45Hz
- 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
- Suggested Alternator-75 A
- Power Input Connector-Screw Terminal
- Cast Aluminum Heatsink with Stealth top mounted control panel
33. Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W -Electronics
By Skar Audio
- Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
- Ultra Compact MOSFET Monoblock Class D Car Amplifier
- Frequency Response: 15Hz – 270Hz
- 8 Gauge Power and Ground Input Terminals
- RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
34. Stetsom EX 3000 Black Edition 1 Ohm Mono Car Amplifier, 3000.1 3K Watts RMS, 1Ω Stable Car Audio, Full Range HD Sound Quality, Crossover & Bass Boost, Car Stereo Speaker MD, Smart Coolers -Dual-Channel Amplifiers
By Stetsom
- Excellent for voice as well as bass
- Mono
- Premium black series with configurable adjustments
- 1 ohm
- 3000 watts
35. Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1 (Renewed) -Dual-Channel Amplifiers
By Kicker
- Factory Refurbished by Kicker – 1 Year Warranty
36. Taramps HD3000-1 Full Range Monoblock Amplifier 3000W 1 Ohm Car Audio -Dual-Channel Amplifiers
By Taramp’s
- 1 x Taramps Electronics HD3000-1 Mono 3000W 1 Ohm Amplifier
- Input Impedance: 18K Ohms Output Impedance: 1 Ohm
- Max Power at 12.6VDC – 1 Ohm: 3000W Max Power at 12.6VDC – 2 Ohms: 2025W Max Power at 12.6VDC – 4 Ohms: 1140W
- Maximum Musical Consumption: 150.5 A Maximum Consumption in Sinusoidal Signal: 301 A
- Frequency Response at Full Range: 10Hz to 20KHz (-3dB) Crossover High Pass (HPF) Variable: 10Hz to 80Hz (-12dB) Crossover Low Pass (LPF): Variable: 80 Hz to FULL (-12dB)
37. BOSS Audio Systems R2504 Riot Series Car Audio Stereo Subwoofer Amplifier – 1000 High Output, 4 Channel, Class A/B, 2/4 Ohm, High/Low Level Inputs, High/Low Pass Crossover, Bridgeable, Full Range -Dual-Channel Amplifiers
By BOSS Audio Systems
- Fixed High-Pass Crossover – Speakers reproduce sound based on high, low or mid-range frequencies
- Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com
- It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- We strongly encourage professional installation of this product to ensure proper and safe functionality
- Specs – Dimensions: 10.72” x 10.44” x 2.25”, Weight: 5.80 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 25 Amp ATO Blade
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
- Variable Gain Control – The gain control is not for adjusting volume
- Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- The High-Pass Crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Power – 250 Max x 4 @2-Ohms, 125 Max x 4 @4-Ohms, 500 Max x 2 Bridged @4 Ohms
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
38. Planet Audio PL1500.1M Monoblock Car Amplifier – 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply -Dual-Channel Amplifiers
By Planet Audio
- Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Specs – Dimensions: 10” x 7” x 2.4”, Weight: 4.9 lbs.
- Both essentially carry signal from your receiver to your amplifier to your speakers
- You can set exact sound specifications for the bass frequency reproduction
- It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Gain Control – The gain control is not for adjusting volume
- A high level (+/- wire) input is measured in wattages
- Low & High Level Inputs – A low level (RCA) input is measured in voltages
- Power – 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
- Included Components: Remote Subwoofer Control, High Input Cable With Connector, Mounting Screws (4)
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
- Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies
- Switchable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
39. Taramps MD 8000.1 2 Ohms 8000 Watts Class D Full Range Mono Amplifier -Dual-Channel Amplifiers
By Taramp’s
- Excellent for voice as well as bass
- Freq.: 35Hz ~55Hz
- 8000 watts
- Bass boost
- Mono
- 2 ohms
40. Skar Audio EVL-10 D2 10″ 2000 Watt Max Power Dual 2 Ohm Car Subwoofer -Dual-Channel Amplifiers
By Skar Audio
- Frequency Response Range: 28 Hz – 300 Hz | Xmax: 23.5 mm (one-way)
- 3″ High Temperature Dual 2 Ohm Voice Coil with Black Coating
- Premium Suspension Featuring the EVL Series Signature Red Two Layer Spider
- Peak Power: 2,000 Watts | RMS Power: 1,000 Watts
- Competition Grade Paper Cone & High Roll Foam Surround
- Deep, Low, Extremely Responsive Bass | Sensitivity: 82.1 dB
41. LEIGESAUDIO 500 Watts MonoBlock Amplifier, Class D, 1 Ohm Stable Subwoofer Amplifiers for Car Audio Speakers -Industrial & Scientific
By LEIGESAUDIO
- Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
- Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
- WARRANTY – As long as you purchase through Amazon.com, LEIGESAUDIO provide a comprehensive 3-year VIP online reseller warranty
- POWER – MAX Power 1Ω：1x2200w @ 1ohm,MAX Power 2Ω：1x1400w @ 2ohm;RMS Power：1x900w @ 1ohm, RMS Power：1x600w @ 2ohm
- Excess energy is stored until it’s needed instead of being converted into heat
- You can set exact sound specifications for the bass frequency reproduction.
- 1 Ohm STABLE – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating
- CLASS D – Power loss is significantly reduced making the amplifier highly efficient
- We strongly encourage professional installation methods to ensure excellent performance and safe functions of this product.
- Reproduce sound based on a number of different low-range frequencies
- VARIABLE SUBSONIC FILTER WITH LOW-PASS CROSSOVER – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
42. Skar Audio Dual 10″ 2400W Loaded Sdr Series Vented Subwoofer Enclosure | SDR-2X10D4, Dual 10″ D4 Loaded Enclosure -Mono Amplifiers
By Skar Audio
- Pre-wired Internally for a 1 Ohm Final Impedance Load at the terminals for an easy installation
- Double front baffle (1.25″) with countersunk subwoofer design for Flush and attractive appearance
- Peak Power: 2, 400 Watts, RMS power: 1, 200 Watts
- Premium Vented Enclosure Made of 5/8″ Mdf and finished in black Carpeting
- Sdr series dual 10-inch Dual 4-ohm loaded Subwoofer Enclosure
43. Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier, Black -Mono Amplifiers
By Power Acoustik
- MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply
- OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection
- DOUBLE POWER Bridge 2 monoblocks together for double power
- SPECIFICATIONS: High/speaker level and low level/RCA input; 4g power wire and 8g speaker wire outputs; Variable 12dB high and low pass crossovers; 12dB bass boost increases low octave harmonics; Dimensions (L x W x H): 16.25 x 8.75 x 4 inches; Weight: 8.22 pounds
- 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power
44. Luibor Kicker CX400.1 400 Watt Class D Mono Amplifier Power System Device for Car Audio Speaker with Sound Control Dial, Black -Mono Amplifiers
By Luibor
- Accepts up to 40-volt input signal; Power (watts/ch) 4 Ohm: 150 x 1, 2 Ohm: 300 x 1, 1 Ohm: 400 x 1; Frequency response (Hz): 25-200, +0/-1 dB
- Features 6 dB variable bass boosts for any low frequencies you run into and 24 dB subsonic protects the speaker from any potentially damaging frequencies
- Equipped with a 12 dB crossover that lets you control the dial to optimize your sound for the ultimate performance
- Efficient high-quality Class-D amplifier is an ideal addition for your vehicle with a 3 second on/off delay to eliminate unwanted interference
- Includes vertical mounting hardware for another unique look; Compatible with CXARC remote bass control (sold separately)
45. Rockville 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp (RPA12) -Musical Instruments
By Rockville
- Damping factor: (1kHz @ 8 ohm): >400: 1
- 2U rack space
- Built in limiter protects your speakers from distortion and clipping
- Imd 60Hz & 1kHz, 4: 1: <0.04%
- channel a & B clipping LED indicators
- User serviceable fuse (15A, 250V)
- Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load
- Effective Damping factor (100Hz, 10W, 4 ohms) 1.08
- Bridged Mode allows you to combine both channels power into one channel for use with a subwoofer
- Heavy duty rack mount ears with handles
- Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
- Input signal voltage: 660mV – 1.5V
- frequency response (bandwidth @ 2VRMS out, @ -3.0dB) 10 Hz – 30 kHz
- Channel a & B separate level controls
- Power, Signal, clipping, and protection LED indicators on front of amp
- Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp
- Frequency response vs THD+N (worst case, across normal bandwidth 1W) 0.11%
- Maximum headroom for 4-ohm and 8-Ohm speakers
- signal to noise ratio: > 100dB
- Built in Crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or subwoofer(s)
- Lcd displays volume in DB per channel and operating temperature
- Output Impedance at speaker terminals: 0.09803 ohms
- Input sensitivity: 0.7V
- Built-in variable high velocity quiet cooling fans
- Damping factor: ( 100Hz, 10W, 4 ohms): 40.8
- Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
- Class A/B
- Level controls for precise setting and matching of sensitivity
- Thd + noise @ 1kHz full power: <0.03%
- Input impedance: 10K ohm balanced
1000 watt 1 ohm stable amp – The Buyer’s Guide
You must have checked the above list, aren’t you mind-blown by the quality of products? Well, if you are then here’s a secret formula which we’ve used to choose them. You can use them too! The best part is, it works for all the product purchases you make! Besides, wouldn’t it be helpful to you, if you knew the factors we’ve considered to choose the 1000 watt 1 ohm stable amp in the above list? So shall we begin with the guide and help you learn about the important factors?
1. Does it have the features you need?
Wait for a minute before you buy the 1000 watt 1 ohm stable amp, check if it has all the features in your requirement list! If it doesn’t have them, then you should avoid buying that particular model and start looking for an alternative. We always suggest our editors to make a list of important features before adding a product to a list and based on the feature, the quality of the product, brand-assurance, rank it! So if it has all you need, you should not mind paying a bit extra. However, if you end up buying the best 1000 watt 1 ohm stable amp which doesn’t have the feature you need the most, then it won’t make sense! Would it? To us, it wouldn’t! That’s why you should make up a list which includes the features you are looking for, technical specifications if any, etc and come up with a budget.
2. Budget and Price Match
Well, you obviously can’t buy the best 1000 watt 1 ohm stable amp with a low budget. That’s why it’s important to make note of all the important features, specs, factors and come up with a budget. Once you are ready with it, look for the products which are either equal to your budget or are close to it. Stick to the budget, because while browsing, you’ll see a model which is slightly better and has an additional feature with a really small price difference. Well, in that case you’ll have to calculate the price of the product which has all the required features and the 1000 watt 1 ohm stable amp with the additional features. See if the difference in amount is worth for the feature? If you don’t have second thoughts, you shall probably increase your budget.
3. Warranty and Brand
Most of the 1000 watt 1 ohm stable amp industry experts we got in touch suggested us to always buy the one which comes from a reputable brand. They also explicitly asked us to include the best brands so that users don’t buy the models from unknown brands or non-reputable companies. Because 1000 watt 1 ohm stable amp from an unknown brand might be cheap at first glance, but could have high-maintenance and could cost a lot in repairs.
Another benefit of buying a 1000 watt 1 ohm stable amp from a reputable brand would be warranty. Most of the 1000 watt 1 ohm stable amp from reputable brands come with good warranty. However, cheap products do come with a warranty, but claiming it can be a herculean task. That’s why buy the models which come from known brands and have good warranty.
4. Check for Reviews and Ratings
Back then when the Internet wasn’t as big as it is today, local stores charged high and even ended up selling the products which sucked or wasn’t future proof. It’s because the salesman threw technical terms and confused the buyer. But nowadays, there are sites like ours which does all the research and lists down the best models and there are eCommerce stores like Amazon which has user reviews which can be read to know the experience of the user with that particular 1000 watt 1 ohm stable amp. Isn’t it great?
The Verdict
We hope that you loved the 1000 watt 1 ohm stable amp we’ve listed in our best list. If it has been helpful, please bookmark our website and share it with people you know whenever they plan to buy something.
To wrap up this guide,
- If you are looking for the best 1000 watt 1 ohm stable amp: You shall consider going for BOSS Audio Systems PT1000 2 Channel Car Amplifier – 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
- If you want the one which has similar features to the best, then you shall consider going for Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
- If you want a 1000 watt 1 ohm stable amp which is “value for money” then you shall go for the Rockville dB14 4000w Peak/1000w RMS Mono 2 Ohm Amplifier Car Audio Amp
- If you want the cheapest 1000 watt 1 ohm stable amp then the SoundBox SCAP2D, 2.5 Farad Digital Capacitor for Car Audio – 2500 Watts should be the best one for your needs!
