Now that you are here, you must be looking for the best 2500 rms amp! If you aren’t for it, you shall use our search and look for the topic you are interested in. As this piece is a lengthy one and covers a few more aspects other than the best list, they are the best 2500 rms amp brands in United States of America and a buyer’s guide for making an informed buying decision.
Before we begin with the list, We ask you to make a list of things that you are looking for in a 2500 rms amp. It could be anything which you’ll require when doing tasks. This will help you have some clarity about the important things and will help you save money by not overspending on the features you won’t use or a product that has more features!
You surely are here for being able to make an informed buying decision when it comes to 2500 rms amp and you must be looking for the list, We know that! But before we begin, we’d like to tell you that, this is the most unbiased list ever, it has specs, lists down the features of the 2500 rms amp, best brands and has a dedicated buyer’s guide for people in United States of America.
Full Disclosure: This article might have a few external links to Amazon and other informative sources. When you make a purchase on Amazon using our link, we’ll earn a small fee without you having to pay extra for the item. This helps us keep the site running and publishing more awesome content, add more research and never let people buy bad-quality products!
Best 2500 rms amp in 2022
1. Skar Audio SKv2-3500.1D Monoblock Class D MOSFET Competition Grade Subwoofer Amplifier, 4700W Max Power -Mono Amplifiers
By Skar Audio- Heavy Duty Advanced Heatsink Design Allows for Maximum Cooling And Efficiency | On-board Bass Boost Control (0-9dB)
- Stable at 1 Ohm, Frequency Response: 15Hz – 270Hz
- Peak Power at 1 Ohm: 4, 700 Watts | RMS Power at 1 Ohm: 3, 500 Watts
- User Adjustable Low Pass Filter (Variable): 35Hz – 250Hz, Remote Subwoofer Level Control Included
- Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier
- Featuring 4-Way Protection Circuitry and 1/0 Gauge Power And Ground Input Terminals for Maximum Current Flow
2. Sundown Audio SFB-3000D 3000W RMS Class D Amplifier -Mono Amplifiers
By Sundown Audio Amplifier- Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA.
- Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB).
- Features: Monoblock Class D Amplifier
- Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable
- Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS
3. Planet Audio PL3000.1D Class D Car Amplifier – 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers -Mono Amplifiers
By Planet Audio- Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies
- 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating
- Strapping Capable – You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s)
- Power – 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
- Class D – Power loss is significantly reduced making the amplifier highly efficient
- Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- You can set exact sound specifications for the bass frequency reproduction
- You now have the ability to connect more subwoofers to take advantage of the extra power
- Specs – Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.
- Excess energy is stored until it’s needed instead of being converted into heat
- Variable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
4. Hifonics BG-2500.1D Brutus Gamma Monoblock Super D Class 2500 Watt Car Audio Sound System Subwoofer Speaker Amp Amplifier -Mono Amplifiers
By Hifonics- CONNECTORS: Secure molded connection terminal with easy-to-access, angled ports for all power, ground, and speaker connections and high-temperature, impact-resistant, nickel-plated connectors; Nickel-plated connectors deliver efficient high/low level audio, crisp sound, while providing a secure and erosion-resistant seal
- OPERATION: Control your sound with mono only operation, variable electronic crossover, and electronic equalizer capabilities; Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
- POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this Super D Class, 2,500-watt, mono car audio amplifier; Wired bass remote included
- OUTPUT TECHNOLOGY: Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion
- POWER: Power ratings: @ 1 ohms – 1 channel x 2,500 watts; @ 2 ohms – 1 channel x 1,250 watts; @ 4 ohms – 1 channel x 625 watts; Dual coil Pulse Width Modulated power supply keeps voltage constant through Ultra-Fi output devices
5. Skar Audio Dual 12″ 5000W Loaded EVL Series Vented Subwoofer Enclosure | EVL-2X12D4 -Mono Amplifiers
By Skar Audio- Peak Power: 5,000 Watts | RMS Power: 2,500 Watts
- Competition Grade EVL Series 12-Inch Dual 4-ohm Loaded Subwoofer Enclosure
- Subwoofers Come Mounted and are Pre-Wired Internally for a 1 Ohm Final Impedance Load at the Terminals
- Premium Vented Enclosure Made of High Strength MDF and Finished in Black Carpeting
- Double Front Baffle (1.25″) with Countersunk Subwoofer Design for Flush and Attractive Appearance
6. Taramps HD3000-2 Full Range Amplifier 2 Ohm 3000W Car Audio Monoblock -Mono Amplifiers
By Taramp’s- Max Power at 12.6VDC – 1 Ohm: 3000W Max Power at 12.6VDC – 2 Ohms: 2025W Max Power at 12.6VDC – 4 Ohms: 1140W
- Maximum Supply Voltage: 16 VDC Minimum Supply Voltage: 9 VDC
- 1 x Taramps Electronics HD3000-2 Mono 3000W 2 Ohm Amplifier
- Frequency Response at Full Range: 10Hz to 20KHz (-3dB) Crossover High Pass (HPF) Variable: 10Hz to 80Hz (-12dB) Crossover Low Pass (LPF): Variable: 80 Hz to FULL (-12dB)
- Consumption at rest: 1.7 A Maximum Musical Consumption: 143.5 A Maximum Consumption in Sinusoidal Signal: 287 A
7. CT Sounds CT-1500.1D Compact Class D Car Audio Monoblock Amplifier, 1500 Watts RMS -Electronics
By CT Sounds- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
8. Boss CH6530 Chaos Exxtreme 6.5″ 300W 3-Way Car Coaxial Audio Speakers and CH4630 4″ x 6″ 250W 3-Way Car Audio Coaxial Speakers Stereo Red 4 Ohm -Mono Amplifiers
By BOSS Audio Systems- Magnet Structure; 100Hz-18khz Frequency Response; Sensitivity: 90 dB @ 1 Watt/1 Meter; Poly-Injected Cone with Foam Surround; 1″ High-Temperature Aluminum Voice Coil; 1/2″ Polyimide Cone Tweeter; 1″ Polyimide Cone Midrange
- BOSS 4×6″ SPEAKERS: BRAND NEW BOSS AUDIO 4″ x 6″ 250 Watt 3-Way Chaos eXXtreme Series Car Speakers; Full Range 4″ x 6″ 3-Way Speaker Pair; 250 Watts MAX 125 Watts RMS Power Handling per Pair; 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity; 250 WATT MAX; Red poly-injection cone woofer; Butyl rubber surround; 1″ Polyimide dome midrange; 1/2″ Piezo tweeter; 4 ohms impedance; 1″ High-temperature aluminum voice coil
- BOSS 6.5″ SPEAKERS: Brand New Boss 6.5″ 300 Watt 3-Way Speakers; Full Range 6.5″ 3-Way Speaker Pair; 300 Watts MAX 150 Watts RMS Power Handling per Pair; 100 Hz to 18 kHz Frequency Response; Impedance: 4 ohms Each; 40 oz
- 6.5″ SPECS: Configuration: 3-way; Mounting Depth: 2.125”; Woofer Size: 6.5″; Mounting Diameter: 5.5″; Part Number: CH6530; Warranty – 1 year factory
- CUSTOM PACKAGE: Brand New Boss CH6530 6.5″ + Boss CH4630 4×6″ Car Speakers (Package)
- 4×6″ SPECS: Top-mount depth: 1-5/8″; Mounting Depth: 1.75”; Woofer Size: 4 x 6 “; Mounting Diameter: 9.85”; Weight: 6.1 lbs; Part Number: CH4630; Warranty – 3 Year Authorized Platinum Online Dealer Warranty; 1 year factory
9. Skar Audio Dual 12″ Complete 2,400 Watt SDR Series Subwoofer Bass Package – Includes Loaded Enclosure with Amplifier -Mono Amplifiers
By Skar Audio- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
- Includes x1 Skar Audio SDR-2X12D4 Dual 12″ Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
- Peak Power: 2,400 Watts, RMS Power: 1,200 Watts
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
10. Skar Audio RP-1500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500W -Mono Amplifiers
By Skar Audio- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Class D MOSFET Monoblock Power Amplifier
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Peak Power at 1 Ohm: 1,900 Watts | RMS Power at 1 Ohm: 1,500 Watts
11. Stetsom EX 3000 Black Edition 1 Ohm Mono Car Amplifier, 3000.1 3K Watts RMS, 1Ω Stable Car Audio, Full Range HD Sound Quality, Crossover & Bass Boost, Car Stereo Speaker MD, Smart Coolers -Mono Amplifiers
By Stetsom- 1 ohm
- Premium black series with configurable adjustments
- Excellent for voice as well as bass
- Mono
- 3000 watts
12. Skar Audio Single 12″ 2500W Loaded EVL Series Vented Subwoofer Enclosure | EVL-1X12D2 -Mono Amplifiers
By Skar Audio- Vented Design of Enclosure and Heavy Duty MDF Construction Allow for Maximum Bass
- Enclosure Air Space: 2.00 Cubic Ft | Tuned @ 38 Hz
- Single 12-inch Dual 2 Ohm EVL Series Loaded Subwoofer Enclosure (Ported Box)
- Peak Power: 2,500 Watts | RMS Power: 1,250 Watts
- Subwoofer is Pre-loaded and Wired to a 1 Ohm Final Impedance Load
13. Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1 -Mono Amplifiers
By Kicker- Efficient Class-D amplifier
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ 6dB variable bass boost for those additional low frequencies
- Variable 12dB crossovers provides control to dial in perfect sound
- 24dB subsonic filter for protection from potentially damaging frequencies
14. XTR 1500.1DZ Amplifier Class D 1 OHM Stable ORION MONOBLOCK Mono 1 Channel 1500 WATTS RMS -Mono Amplifiers
By Orion- Hi Pass Freq
- 6V: 1500 Watts X 1 Channel
- Frequency Response 20Hz~300KHz
- 30Hz-250Hz / Low Pass Freq
- 6V: 600 Watts X 1 Channel / RMS Watts @ 2 Ohm Stereo 12
- 6V: 975 Watts X 1 Channel / RMS Watts @ 1 Ohm Stereo 12
- 30Hz-250Hz
- RMS Watts @ 4 Ohm Stereo 12
- RMS Power Watts: 6000 Watts
- Signal Noise Ratio: 90dB
15. BOSS Audio OX3KD Class D Car Amplifier – 3000 Watts, 1 Ohm Stable, Digital, Monoblock, MOSFET Power Supply -Electronics
By BOSS Audio Systems- Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s)
- CLASS D: Power loss is significantly reduced making the amplifier highly efficient
- It weighs 6.5 lbs.
- We strongly encourage professional installation of this product to ensure proper and safe functionality
- POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
- You now have the ability to connect more subwoofers to take advantage of the extra power
- Excess energy is stored until it’s needed instead of being converted into heat
- Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating
- DIMENSIONS: The OX3KD is 12.3 inches in Depth, 7 inches in Width and 2.3 inches in Height
- WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com
16. Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier, Black -Mono Amplifiers
By Power Acoustik- 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power
- MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply
- SPECIFICATIONS: High/speaker level and low level/RCA input; 4g power wire and 8g speaker wire outputs; Variable 12dB high and low pass crossovers; 12dB bass boost increases low octave harmonics; Dimensions (L x W x H): 16.25 x 8.75 x 4 inches; Weight: 8.22 pounds
- OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection
- DOUBLE POWER Bridge 2 monoblocks together for double power
17. Hifonics BXX2000.1D Brutus Class D 2000W RMS Mono Car Subwoofer Amplifier w/Amp Kit -Mono Amplifiers
By Hifonics- / 2 ohms: 1000 watts x 1 channel
- / 1 ohm: 2000 watts x 1 channel.
- 1D: Brutus Class D 2000W RMS Mono Car Subwoofer Amplifier
- Max Power Rating: 4 ohms: 500watts x 1 channel
- Variable low-pass filter: 30 – 250 Hz, 12 dB/octave / Subsonic filter: 15 – 35 Hz / Variable Bass Boost: 0 to +10 dB bass boost
- 1% / Signal to Noise Ratio: >95 dB
- BXX2000
- Package: Hifonics BXX2000
- Frequency Response: 10 – 250 Hz / Total Harmonic Distortion (THD):
- 1D + 0 Gauge Amp Kit
18. Hifonics BXX2000.1D Brutus Class D 2000W RMS 1 Ohm Mono Car Subwoofer Amplifier -Mono Amplifiers
By Hifonics- 1 Ohm Mono Car Subwoofer Amplifier
19. Audiopipe APMN-2000 RMS Class D Monoblock Subwoofer Amplifier, 2000W Mono Sub Amp -Mono Amplifiers
By HDStars- Frequency Response: 30-180Hz
- Fuses: 1 X 150A AFC fuse and fuse holder (included) Remote bass knob, 1 Ohm Stable.
- RMS Power Rating (1 ohm): 1944 watts x 1 channel.
- – RMS Power Rating (2 ohms): 1300 watts x 1 channel.
- RMS Power Rating (4 ohms): 770 watts x 1 channel
- LPF: 40-180Hz Subsonic Filter: 5-50Hz
- PLEASE NOTE: Its Recommended Grounding To The Frame of The Vehicle.
20. Rockford Fosgate Punch P1000X2 1000 Watt 2 Channel Amplifier -Mono Amplifiers
By Rockford Fosgate- Featuring Class-A/B topology, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N
- 300 Watts RMS x 2 @ 4-Ohms / 500 Watts RMS x 2 @ 2-Ohms / 1000 Watts RMS x 1 Bridged @ 4-Ohms (4-Ohm stable in bridged mode)
- The Punch P1000X2 is a full chassis (2.38” x 7.76” x 15.03”) 2-channel stereo amplifier, that delivers a rocking 1000 Watts of RMS Power
- RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
- Versatile design for full-range or component systems or can be bridged for use with several subwoofers (RMS Power Output: 300 Watts x 2 @ 4-Ohm OR 500 Watts x 2 @ 2-Ohm OR 1000 Watts x 1 @ 4-Ohm Bridged)
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- Set-up
- Operating Voltage 9 – 16 VDC
- Works with factory installed & aftermarket source units
- Cast Aluminum Heatsink with Stealth top mounted control panel
- On-board Punch EQ with +18dB boost at 45Hz
- Crossover Controls: 50-250 Hz, 12 dB/octave
21. Sundown Audio SIA-3450D Monoblock 3500W RMS Amplifier -Mono Amplifiers
By Sundown Audio- 2 Years Warranty
22. Kicker 46CXA6605 Car Audio 5 Channel Amp Speaker & Sub 1200W Amplifier CXA660.5 -Mono Amplifiers
By KICKER- KickEQ 6dB variable bass boost for those additional low frequencies
- Variable 12dB crossovers provides control to dial in perfect sound
- Three-second turn-on/off delay to eliminate unwanted interference
- Class A/B full-range channels
- Class D bass channel included for one amp to run an entire system
23. Rockville dB55 4000 Watt Peak/980w RMS 5 Channel Car Amplifier + Amp Kit -Mono Amplifiers
By Rockville- – 2 Ohm 240 Watts x 4 + 1000 Watts x 1, – 4 Ohm: 160 Watts x 4 + 600 Watts x 1, Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song, – 2 Ohm 480 Watts x 4 + 2000 Watts x 1, – 4 Ohm: 320 Watts x 4 + 1200 Watts x 1, High-Speed MOSFET Power Supply, Rugged switching MOSFETs for Class D in CH5, Under Voltage Protection at 10V, Over Voltage Protection at 16V, Optical Coupler Class “AB” +”D” Technology, Studio-Grade Bipolar Output Stage Transistors
- Rockville RWK41 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit, (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 4 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire
- 3 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 80 Amp AGU Gold Plated Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets, Soft abrasion proof insulating jacket allows for 100% improved flexibility, PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- Features of dB55: Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc), – 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N, – 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N, RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
- Package Includes: (1) Rockville dB55 4000 Watt/2000w RMS 5 Channel Amplifier Car Stereo Amp, Loud!!, (1) Rockville RWK41 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA’s
24. TORO TECH – R4. 2500 Watts MAX – 1050 Watts RMS 1Ω Stable Monoblock Car Amplifier Sound Quality Class D Design, Built-in Auto Sensing Turn-On, Subwoofer Amplifier -Mono Amplifiers
By Toro Tech- The R4 features variable low pass crossovers for system flexibility
- Response 13Hz – 220kHz, RCA Voltage 200mV ~ 10V, Bass EQ 0Hz ~ 12dB, Dimensions 10.83 (in) x 2.0 (in) x 7.1 (in)
- The Toro Tech R4 is a Sound Quality Class-D Design Mono Block Car Audio Amplifier that produces 1050 Watts x 1 RMS – 2500 Watts x 1 MAX power at 1 Ohm and is CTA Compliant to guarantee true rated power
- The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller.
- Selectable Bass Boost EQ ~ 0 ~ 12dB, Variable Gain Control, Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks, Variable Low Pass Electronic Crossover, Freq
- Each TORO product undergoes rigorous testing to insure it meets our stringent standards before we make it available for sale and all products are 100% QC’d before shipping to customers.
- To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize nickel plated terminal block for power input & speaker output
- At TORO TECH our sole purpose is to offer the ultimate combination of performance, quality, style and value
- Each TORO product is designed and engineered in the USA to exacting standards by audio enthusiasts with decades of combined, hands on experience
- Built-In Auto Sensing Turn-On Function (Hi-Inputs) for vehicles with or without RCA Inputs
25. Rockville dB55 4000 Watt/1000w CEA RMS 5 Channel Amplifier Car Stereo Amp, Loud! -Mono Amplifiers
By Rockville- Status Mode LED Indicator
- Minimum THD at Rated Power: < 0.05%
- 4 Ohm: 160 Watts x 4 + 600 Watts x 1
- Subsonic Filter: 15Hz – 55Hz.
- 40 Amp x3
- CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc)
- Includes: Amplifier
- Frequency Response: 15-35KHz
- 2 Ohm 480 Watts x 4 + 2000 Watts x 1
- Birth sheet with tested power
- S / N Ratio: >90dB
- 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
- Mounting Screws
- Rugged switching MOSFETs for Class D in CH5
- Over Voltage Protection at 16V
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Optical Coupler Class “AB” +“D” Technology
- High Pass Filter: 15Hz – 4KHz
- Bass Remote
- Mute and Delay Soft Start System
- 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.
- Full IC-Controlled Protection Circuitry
- Owner’s manual
- 8 Volt Preamp Circuitry
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
- Fully Adjustable 12dB Bass Equalizer
- Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song
- Under Voltage Protection at 10V
- Damping Factor: >100@ 100Hz
- High-Speed MOSFET Power Supply
- Warranty.
- Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz
- Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier
- 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N
- Studio-Grade Bipolar Output Stage Transistors
- Dimensions: (W x H x L) 9” x 2.4′ x 18.6″.
- 2 Ohm 240 Watts x 4 + 1000 Watts x 1
- Remote Dashboard Subwoofer Control
26. Planet Audio BBD2500 Class D Car Amplifier – 2500 Watts, 1 Ohm Stable, Digital, Monoblock, MOSFET Power Supply -Electronics
By Planet Audio- It weighs 5.8 lbs.
- 1 ohm stable: able to continuously power loads of 1 ohm without encountering difficulties such as overheating
- Variable bass boost: bass boost allows you to adjust the low bass within the boost Range to just the way you like it
- Class D: power loss is significantly reduced making the amplifier highly efficient
- You can set exact sound specifications for the bass frequency reproduction
- Specs: the BBD2500 is 11.4 inches in depth, 6.9 inches in width and 2.7 inches in height
- Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- Excess energy is stored until it’s needed instead of being converted into heat
- Variable low-pass crossover: subwoofers reproduce sound based on a number of different low-range frequencies
- Power: 2500 watts max X 1 @1-ohm, 1250 watts max X 1 @2-ohms, 625 watts max X 1 @4-Ohms
- Variable subsonic filter: to prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
27. Rockville RVA-M2 2500w Peak/625w Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote -Mono Amplifiers
By Rockville- 1 Ohm: 625 Watts(<1% THD @ 14.4 Volts) (70.2% efficient)
- Full IC-Controlled Protection Circuitry.
- Low Pass Filter: 32Hz – 300Hz
- Dimensions: (L x W x H) 13″ x 8.5″ x 2.24″
- Fuse: 30A*2
- Status Mode LED Indicator
- Class D Technology
- Under Voltage Protection at 9V
- Frequency Response: 10Hz – 300Hz
- S/N Ratio: >90dB
- Damping Factor: >150 @ 100Hz
- Radiation cooling keeps the amp running at high volumes for hours straight.
- Minimum THD at Rated Power: <0.1%
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
- 2 Ohm: 440 Watts (<1% THD @ 14.4 Volts) (82.4% efficient)
- Metal Bass Remote Included
- Phase Control Switch
- High-Speed MOSFET Power Supply
- 4 Ohm: 264 Watts (<1% THD @ 14.4 Volts) (83.7% Efficient)
- Rockville RVA-M2 2500w Peak/625w Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote
- Mute and Delay Soft Start System
- Over Voltage Protection at 16V
- Adjustable 0-12dB Bass Equalizer
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Extruded aluminum heatsink
- Weight: 7 lbs
- Subsonic Filter: 10Hz – 50Hz
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
- 1 Ohm: 2500 Watts
- Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money
28. Rockford Fosgate Punch P1000X1BD 1000 Watt Class-bd Mono Amplifier -Mono Amplifiers
By Rockford Fosgate- Set-up
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- The Punch P1000X1bd is a full chassis (2.38” x 7.76” x 13.28”) mono amplifier optimized for subwoofers only, that pumps out a whopping 1,000 Watts into a 1-Ohm load
- Featuring RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N
- RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
- Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 300 Watts x 1 @ 4-Ohm OR 500 Watts x 1 @ 2-Ohm OR 1000 Watts x 1 @ 1-Ohm)
29. Hifonics ZXX-2400.1D Zeus Mono Channel Car Audio Amplifier (Silver) – Class D Amp, 2400-Watt, Aluminum Heat Sink, Variable Electronic Crossover, Illuminated Logo, Bass Remote Included, 1 Ohm Stable -Mono Amplifiers
By Hifonics- This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
- The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
- High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
- Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
- BUILT FOR POWERFUL SOUND – Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board
- MADE TO LAST – Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion
- CLASSIC HIFONICS LOOK – The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier
- Molded secure connections are used for all wires and angled for ease of access during installation.
- HIGH QUALITY CONNECTIONS – RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit
- CLASS D AMPLIFIER – Class D topology ensures high efficiency with big power and a small footprint
30. Rockville dB13 3000 Watt Peak/750w RMS Mono 2 Ohm Amplifier Car Amp -Mono Amplifiers
By Rockville- – 2 Ohm: 750 Watts x 1 Channel <1% THD+N
- Under Voltage Protection at 10V
- – 2 Ohm: 3000 Watts x 1 Channel
- Over Voltage Protection at 16V
- Mounting Screws
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Full IC-Controlled Protection Circuitry
- RCA Preamp Line Output
- Damping Factor: >150 @ 100Hz
- Mute and Delay Soft Start System
- Minimum THD at Rated Power: <0.1%
- Includes: Amplifier
- Fully Adjustable 12dB Bass Equalizer
- – 4 Ohm: 1800 Watts x 1 Channel
- Low Pass Filter: 50Hz – 250Hz
- Bass Remote
- Warranty.
- Dimensions: (W x H x L) 9″ x 2.4″ x 14.7″
- Owner’s manual
- Frequency Response: 15Hz – 250Hz.
- Status Mode LED Indicator
- High-Speed MOSFET Power Supply
- Subsonic Filter: 15Hz – 55Hz
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 80 Amp Maxi Fuse
- S / N Ratio: >90dB
- Phase Control Switch.
- Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
- Optical Coupler Class “D” Technology
- – 4 Ohm: 450 Watts x 1 Channel <1% THD+N.
- Remote Dashboard Subwoofer Control
- 8 Volt Preamp Circuitry
- Birth sheet with tested power
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
31. Power Acoustik EG1-10000D 5000W Class D Monoblock Amplifier, White -Mono Amplifiers
By Power Acoustik- NOTE: Check User Manual on Technical Specification before use
- 1-Ohm stable monoblock operation for Max power link 2 monoblocks together for double power!
- 1 to charge x 5000 watts RMS @ 1 ohm, 12Db bass Boost increases low octave harmonics 1800 phase Shift improves low octave dynamics
- Dash mount remote bass control knob included
32. BOSS Audio Systems PF1800 4 Channel Car Amplifier – 1800 Watts, Full Range, Class A-B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable -Mono Amplifiers
By BOSS Audio Systems- It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current
- Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Variable Gain Control – The gain control is not for adjusting volume
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
- We strongly encourage professional installation of this product to ensure proper and safe functionality
- Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs.
- It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com
- Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
- Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
33. Skar Audio EVL-12 D2 12″ 2500 Watt Max Power Dual 2 Ohm Car Subwoofer -Mono Amplifiers
By Skar Audio- Competition Grade Paper Cone & High Roll Foam Surround
- Peak Power: 2,500 Watts | RMS Power: 1,250 Watts
- 3″ High Temperature Dual 2-ohm Voice Coil with Black Coating
- Deep, Low, Extremely Responsive Bass | Sensitivity: 85.1 dB
- Frequency Response Range: 25 Hz – 250 Hz | Xmax: 23.5 mm (one-way)
- Premium Suspension Featuring the EVL Series Signature Red Two Layer Spider
34. Skar Audio Single 12″ Complete 1,200 Watt SDR Series Subwoofer Bass Package – Includes Loaded Enclosure with Amplifier -Mono Amplifiers
By Skar Audio- Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
- Peak Power: 1,200 Watts, RMS Power: 600 Watts
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Includes x1 Skar Audio SDR-1X12D2 Single 12″ Loaded 1,200 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Amplifier
35. Power Acoustik RZ1-3500D 3500W Class D Monoblock Amplifier, Black -Mono Amplifiers
By Power Acoustik- Mosfet PWM power supply
- Small, Compact 4.75″ chassis
- Class D
36. Hifonics BXX3000.1D Brutus Class D 3000W RMS 1 Ohm Mono Car Subwoofer Amplifier -Mono Amplifiers
By Hifonics- Subsonic Filter – 15Hz – 35Hz
- Frequency Response – 10Hz – 250Hz
- 3000W RMS 1 Ohm Mono Car Subwoofer Amplifier
- Bass Boost – 0dB – 10dB
- Phase Shift: 0° – 180°
- Signal to Noise – >95dB
37. Audiopipe 1800w Mono Class D Amp -Mono Amplifiers
By Audiopipe- Audio pipe
38. Power Acoustik BAMF1-8000W Class D Monoblock Amplifier,black -Mono Amplifiers
By Power Acoustik- MOSFET power supply with audiophile-grade IRTM transistors
- Die-cast aluminum-alloy heat sink for optimum dissipation
- Included components: product, manual
- 2 amps are bridgeable for double power
- Class D monoblock
- 1Ω stable monoblock operation for max power
39. Power Acoustik RZ1-2300D 2300W Class D Monoblock Amplifier,Black -Mono Amplifiers
By Power Acoustik- 2300-Watt max power, 900-Watt RMS at 4-ohm, 1400-Watt RMS at 2-ohm
- MOSFET PWM power supply
- 2 ohm stable class D Monoblocks
40. Planet Audio AC2600.2 2 Channel Car Amplifier – 2600 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable -Mono Amplifiers
By Planet Audio- 2600 W MAX Bridged Power @ 4 Ohm x 1 Channels
- Remote Subwoofer Control, Blue Backlit Illumination
- Dimensions: Depth 18” x Width 10” x Height 2.4”
- 1300 W MAX Power @ 2 Ohm x 2 Channels
- 650 W MAX Power @ 4 Ohm x 2 Channels
- Low and High Level Inputs, Variable Filter, Variable Bass Boost
- 6 Year Platinum Online Dealer Warranty
- Full-Range, Class A / B Topology, MOSFET Power Supply
41. CT Sounds T-1500.1D Class D Monoblock Amplifier Car Audio, 1500 Watts RMS -Electronics
By CT Sounds- Built with Korean capacitors to cover the capacity difference in car audio applications where the 1500w mono amplifier draws more current than is available from the electrical system
- Internal wiring features 8AWG OFC cables for enhanced electric current allowing this car audio amplifier to deliver louder, cleaner, and more punchy power than other car mono amplifiers in its class
- Car amplifier class d with 1500 watts RMS power at 1-ohm load (14.4v); 900 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 10Hz to 250Hz (Bass Knob Included)
- High power MOSFET switching technology and the silicon utilized throughout the internal components will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Pure class d amplifier car audio where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic
42. Skar Audio SVR-12 D2 12″ 1600 Watt Max Power Dual 2 Ohm Car Subwoofer -Mono Amplifiers
By Skar Audio- Peak Power: 1, 600 Watts | RMS Power: 800 watts
- Powerful high flux ferrite motor with advanced air Flow Cooling Design | Fs: 36 Hz
- High Roll Foam Surround stitched to competition Grade pressed paper cone
- Frequency response range: 22 Hz – 300 Hz | mounting depth: 6.50″
- Engineered for incredibly deep, dynamic, and powerful bass | Sensitivity: 86.1 dB
- 2.6″ (65.5mm) dual 2-ohm high temperature 4-layer copper Voice Coil
43. Orion Cobalt Monoblock Amplifier – Class D Amplifier 1500W RMS 3000W Max, Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp -Mono Amplifiers
By AVD- A high level (+/- wire) input is measured in wattages
- Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs
- A low level (RCA) input is measured in voltages
- Power – This Class D 3000 watt Amplifier has a power rating distribution as followed 3000 X 1 MAX @ 1 OHM
- 1 Ohm Stable – This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds
- The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
- QUALITY – This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place
- Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
- Both essentially carry signal from your receiver to your amplifier to your speakers
- Features – The monoblock bass boost amplifier has features like – Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift
44. Taramps 900745 Class D BASS 8K 8000 Watt RMS 1 Ohm Automotive Sound Systems Mono Full Range Speaker Amplifier with Built In Thermal Protection -Mono Amplifiers
By Taramps- MAXIMUM POWER: Operates at 1 ohm with 8,000 watt RMS for maximum power
- STAYS COOL: Built-in thermal protection prevents over-heating
- FULL RANGE: Full-range amplifier can operate on all frequencies using the right measure
- AUDIO BOOST: Automotive amplifier boost your car audio sound for during every drive
- VERSATILE: ideally made for most car speaker applications; Dimensions ( W x H x D): 2.87 x 9.41 x 16.50 inches
45. Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 1250W RMS 2500W Max, Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp -Mono Amplifiers
By .AVD.- A low level (RCA) input is measured in voltages
- Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology
- The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Both essentially carry signal from your receiver to your amplifier to your speakers
- A high level (+/- wire) input is measured in wattages
- In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing.
- Quality – This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place
- Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs
- Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 625 X 4 MAX @ 2 OHMS
- Features – The 4 channel bass boost amplifier has features like – Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable
- Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
2500 rms amp – The Buyer’s Guide
You must have checked the above list, aren’t you mind-blown by the quality of products? Well, if you are then here’s a secret formula which we’ve used to choose them. You can use them too! The best part is, it works for all the product purchases you make! Besides, wouldn’t it be helpful to you, if you knew the factors we’ve considered to choose the 2500 rms amp in the above list? So shall we begin with the guide and help you learn about the important factors?
1. Does it have the features you need?
Wait for a minute before you buy the 2500 rms amp, check if it has all the features in your requirement list! If it doesn’t have them, then you should avoid buying that particular model and start looking for an alternative. We always suggest our editors to make a list of important features before adding a product to a list and based on the feature, the quality of the product, brand-assurance, rank it! So if it has all you need, you should not mind paying a bit extra. However, if you end up buying the best 2500 rms amp which doesn’t have the feature you need the most, then it won’t make sense! Would it? To us, it wouldn’t! That’s why you should make up a list which includes the features you are looking for, technical specifications if any, etc and come up with a budget.
2. Budget and Price Match
Well, you obviously can’t buy the best 2500 rms amp with a low budget. That’s why it’s important to make note of all the important features, specs, factors and come up with a budget. Once you are ready with it, look for the products which are either equal to your budget or are close to it. Stick to the budget, because while browsing, you’ll see a model which is slightly better and has an additional feature with a really small price difference. Well, in that case you’ll have to calculate the price of the product which has all the required features and the 2500 rms amp with the additional features. See if the difference in amount is worth for the feature? If you don’t have second thoughts, you shall probably increase your budget.
3. Warranty and Brand
Most of the 2500 rms amp industry experts we got in touch suggested us to always buy the one which comes from a reputable brand. They also explicitly asked us to include the best brands so that users don’t buy the models from unknown brands or non-reputable companies. Because 2500 rms amp from an unknown brand might be cheap at first glance, but could have high-maintenance and could cost a lot in repairs.
Another benefit of buying a 2500 rms amp from a reputable brand would be warranty. Most of the 2500 rms amp from reputable brands come with good warranty. However, cheap products do come with a warranty, but claiming it can be a herculean task. That’s why buy the models which come from known brands and have good warranty.
4. Check for Reviews and Ratings
Back then when the Internet wasn’t as big as it is today, local stores charged high and even ended up selling the products which sucked or wasn’t future proof. It’s because the salesman threw technical terms and confused the buyer. But nowadays, there are sites like ours which does all the research and lists down the best models and there are eCommerce stores like Amazon which has user reviews which can be read to know the experience of the user with that particular 2500 rms amp. Isn’t it great?
The Verdict
We hope that you loved the 2500 rms amp we’ve listed in our best list. If it has been helpful, please bookmark our website and share it with people you know whenever they plan to buy something.
To wrap up this guide,
- If you are looking for the best 2500 rms amp: You shall consider going for Taramps 900745 Class D BASS 8K 8000 Watt RMS 1 Ohm Automotive Sound Systems Mono Full Range Speaker Amplifier with Built In Thermal Protection
- If you want the one which has similar features to the best, then you shall consider going for Rockford Fosgate Punch P1000X1BD 1000 Watt Class-bd Mono Amplifier
- If you want a 2500 rms amp which is “value for money” then you shall go for the Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
- If you want the cheapest 2500 rms amp then the Boss CH6530 Chaos Exxtreme 6.5″ 300W 3-Way Car Coaxial Audio Speakers and CH4630 4″ x 6″ 250W 3-Way Car Audio Coaxial Speakers Stereo Red 4 Ohm should be the best one for your needs!