The RYOBI RTS08 and WARRIOR 57342 are two real table saws worth comparing with a $200 tool budget. On October 4, 2026, Home Depot displayed the RYOBI at $149 and Harbor Freight displayed the WARRIOR at $149.99. Those are advertised U.S. tool prices before tax, delivery and any missing equipment, not guaranteed checkout totals or local-stock promises.
Our first choice to investigate is the RYOBI RTS08 for small DIY projects because its listing includes a blade. The WARRIOR 57342 is an alternative when its larger blade and published cutting depth suit the work, but its narrow rip capacity is a significant limitation and the blade costs extra. Neither should be chosen simply because its motor has the larger amp number.
How we selected: this is a research-based comparison of manufacturer specifications, retailer listings and safety documentation, not a hands-on test. Prices were checked on October 4, 2026 and may change. This page links directly to the named retailers and manufacturers; it does not use Amazon affiliate product cards. Elsewhere on this site, qualifying affiliate purchases may earn a commission.
Table saws under $200: quick comparison
| Model | Observed tool price | Why consider it? | Main budget or fit limitation |
|---|---|---|---|
| RYOBI RTS08 | $149 at Home Depot | Compact 8-1/4-inch saw; blade included | No stand; confirm the current unit’s rip and depth capacities |
| WARRIOR 57342 | $149.99 at Harbor Freight | 10-inch saw; listed 3-3/16-inch depth at 90 degrees | Blade sold separately; only 9-inch rip capacity on either side |
Check the exact model number, included parts, delivery charge and local availability before deciding. A sub-$200 shelf price is useful only if the complete setup fits your budget and project.
1. RYOBI RTS08: first option for a compact DIY setup
The Home Depot RTS08 listing identifies a 13-amp, 8-1/4-inch corded saw with a blade included and no stand. Its displayed $149 price leaves $51 of a $200 budget before tax and other costs. We have not measured fence accuracy, cut finish or long-term durability.
Why it makes the shortlist: avoiding a separate starter-blade purchase makes the initial budget easier to plan. Its compact format also makes sense when storage space matters more than large-panel capacity.
Check before buying: do not assume every specification you find under the RTS08 family is interchangeable. RYOBI’s Canadian RTS08 page lists 12-1/2 inches of rip capacity to the right and 7 inches to the left, while a RYOBI answer on the U.S. retailer’s questions page gives 12 inches right and 8 inches left. Confirm the label, manual and capacity of the unit actually supplied if a cut is close to the limit. Neither description suggests a wide-rip cabinetmaking saw.
2. WARRIOR 57342: consider it for narrow-board work
The WARRIOR 57342 product page lists a 15-amp motor, a 10-inch blade size and a maximum 90-degree cut depth of 3-3/16 inches. The decisive trade-off is its 9-inch maximum rip width to either side. That limit matters more than the large blade if your project calls for wide shelving or panel cuts.
Budget warning: the $149.99 listing excludes the blade. Add a compatible blade, tax and any support or protective equipment to the total. Harbor Freight also displayed a 20% restocking fee on this item, so read the current return terms before ordering.
Who should consider it: someone whose planned cuts fit its published capacities and who can provide a stable, properly mounted workstation. Read the manual matching the saw’s identification label before buying accessories; blade compatibility includes more than diameter.
Why the WORX BladeRunner is a different kind of saw
The WORX WX572L BladeRunner is a bench jigsaw using T-shank blades, rather than a conventional circular-blade table saw. It may be relevant for small craft work and shaped cuts, but it is not a like-for-like substitute for a ripping saw. We could not verify a usable current price on the manufacturer’s refreshed page, so it is not counted as an available under-$200 recommendation here.
How to choose without wasting the budget
Start with a cut list
Write down the widest rip, thickest workpiece and bevel cuts your project needs. Match these to the exact saw’s manual. If the intended work exceeds the tool’s capacity, buying it cheaply does not solve the problem. For large sheet goods, consider a suitable guided cutting setup, retailer cutting service or rental rather than improvising an unsupported cut on a small table.
Separate the tool price from the ready-to-use cost
Allow for a suitable work surface or stand, any missing blade, the required stock support, eye and hearing protection, and appropriate dust control. Existing compatible equipment can make a budget saw more practical. If you need everything from scratch, a $200 all-in limit may be too tight even when the saw itself is $149.
Inspect the fence, guarding and support
Before use, follow the manufacturer’s assembly and alignment checks. A fence that will not lock correctly, a damaged guard or a missing safety component is a reason to stop and obtain proper service or replacement parts. Do not modify a fence or defeat a guard to make an undersized saw handle a larger job.
Safety essentials
A low price does not make a table saw a low-risk tool. Read the complete manual, get competent instruction if you are new to the tool, mount it as directed and keep children and bystanders away. Disconnect power before blade changes or adjustments. Use the specified guarding, riving knife and other required safety devices, suitable push sticks or blocks, and properly supported stock. Never make freehand cuts or reach near a moving blade. Wear the eye, hearing and dust protection appropriate to the task.
OSHA’s table-saw guidance explains the hazards of blade contact, kickback and flying material. This buying guide is not operating instruction; the exact saw’s manual governs its setup and permitted operations.
Frequently asked questions
Can I buy a new table saw for under $200?
Yes. The two retailer pages above displayed tool prices below $200 when checked. Availability and checkout totals depend on the date, location, taxes and additional equipment. Check the linked listings again before purchase.
Is a 10-inch saw automatically better than an 8-1/4-inch saw?
No. Blade size is only one part of the decision. Compare the required cutting depth, rip width, included equipment, fence operation, support arrangement and the type of projects you actually plan.
Should I buy a used saw to stay under $200?
Only after verifying the exact model, complete safety equipment, condition, recall status and replacement-part support. A missing guard or damaged fence can erase the savings. If you cannot evaluate it confidently, a documented new tool, rental or professional cutting service is easier to assess.
Can these saws take a dado stack?
Do not assume so from the blade diameter or motor rating. Use a dado set only when the exact saw’s current manual explicitly permits it and specifies compatible equipment. If that cannot be confirmed, choose another method or a properly equipped tool.
Bottom line: compare the RTS08 first if its verified capacities cover your project; consider the WARRIOR only when its narrow rip width and extra blade cost work for you. If neither fits the cut list and complete setup cost, save for a more suitable tool rather than stretching a small saw beyond its limits.
